CCSO-014-1090 SAW Clock Oscillator CCSO-014-1090 Model 14 Pin DIP, 12V, True Sinewave Model CCSO-014-1090 is a 1.090 GHz SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -138 dBc/Hz phase noise at 10kHz offset, +12V input voltage, -55°C to +105°C operating temperature, 14 PIN DIP hermetic sealed package. The oscillator has no sub-harmonic and the second harmonic is -35dBc Max. Rev: M Date: 18-Sep-2015 Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-014-1090 SAW Clock Oscillator CCSO-014-1090 Model 14 Pin DIP, 12V, True Sinewave Frequency: Temperature Range: Optional*: Storage: Input Voltage: Supply Ripple: Freq. vs Temp.: Input Current: Output: Output Power: Start-up time: 2nd Harmonic: Sub-harmonics: Load: Jitter: SONET OC-48(12kHz~80MHz) SONET OC-192(50kHz~80MHz) Phase Noise Typical: 1kHz -110 dBc/Hz 10kHz -138 dBc/Hz 100kHz -150 dBc/Hz 1MHz -160 dBc/Hz G-sensitivity: 1.090 GHz -55°C to 105°C -40°C to 85°C -55°C to 110°C 12.0V ±0.25V 150mV p-p Max ±250ppm Max 30mA Typical, 40mA Max True SineWave +12dBm ±2dBm 2ms Typical, 10ms Max -40dBc Typical, -35dBc Max None 50 Ω 0.820 (20.83) 0.750 (19.05) 0.520 (13.21) 0.450 (11.43) 0.18ps RMS Typical, 0.20ps RMS Max 0.12ps RMS Typical, 0.15ps RMS Max CRYSTEK CCSO-014-1090 1090MHz Date Code 0.200 (5.08) 0.236 (6.00) 0.600 (15.24) 0.9×10-9 per g PIN Connection 1 7 8 14 N/C GND Output Vdd 1 7 14 8 0.300 (7.62) *Option: CCSO-014X-1090 -40°C to +85°C Version Parameter Conditions Available Frequencies Mechanical Shock MIL-STD-202, Method 213, Condition A Mechanical Vibration MIL-STD-202, Method 204, Condition A Solderability MIL-STD-202, Method 208 Solvent Resistance MIL-STD-202, Method 215 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition C Thermal Shock MIL-STD-202, Method 107, Condition A Moisture Resistance MIL-STD-202, Method 106, 90% to 98% RH 10 Days Terminal Strength MIL-STD-202, Method 211, Condition A Hermetic Seal MIL-STD-202, Method 112, Procedure III, Condition C Humidity MIL-STD-202, Method 103 High Temperature Life (Operating) MIL-STD-202, Method 108, Condition D, 1,000 hrs at +70°C Acceleration MIL-STD-202, Method 212, Condition A Parameter Conditions 100% Temperature Testing -55/105°C 100% Start-Up Testing -55°C and +85°C CRYSTEK CORPORATION 1030 MHz 1090 MHz Rev: M Date: 18-Sep-2015 Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com