7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2009 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 1 2009 REVISIONS ALL RIGHTS RESERVED. P LTR 1.2 3 PLC 1 -X- 6 D 6 ALL PLATED THRU HOLES 2 PLC D C B A BSC 9 x 6 = 15APR2014 AP RP D REVISED PER ECO-16-008845 20SEP2016 AP RP 2 MATERIAL: SHIELD - PHOSPHOR BRONZE CONTACT - COPPER-NICKEL-SILICON HOUSING, CHICKLET AND CHICKLET COVER - GLASS FILLED POLYESTER, UL 94V-O RATED. 1 0.2 5 22.5 D 3 FINISH: CONTACT AND SHIELD MATING AREA: MEETS THE PERFORMANCE REQUIREMENTS OF TYCO ELECTRONICS PRODUCT SPECIFICATION, 108-2055-1; BASED ON TELCORDIA GR-1217-CORE, APPLICATIONS IN UNCONTROLLED ENVIRONMENTS. COMPLIANT PIN AREA: 0.5µm MIN BRIGHT TIN/LEAD OVER BASE PLATING. 4 CONNECTOR MARKED WITH PART NUMBER AND DATE CODE IN APPROXIMATE AREA SHOWN. 5 DIMENSION APPLIES TO CENTERLINE OF THRU HOLE. 6 DATUMS AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 6 1.04 2.5 APVD REVISED PER ECO-14-005095 REFERENCE APPLICATION SPEC 114-13059 FOR RECOMMENDED PLATED THRU HOLE DIAMETER AND PLATING THICKNESSES. 1.1 -Y- 2.5 TYP 2.5 TYP DWN C 1 4.5 BSC DATE 1.2 0.9 ROW DG (GROUND) ROW ROW ROW CG (GROUND) ROW BG (GROUND) ROW ROW R 0 W AG (GROUND) DESCRIPTION 7. CONTACT AREA LUBRICATED WITH BELLCORE APPROVED LUBRICANT. TECHNICAL REFERANCE: GR-1217-CORE, ISSUE 1, NOVEMBER 1995. C 2.5 REF TYP 1 0.75 REF 1.5 REF TYP ROW D ROW C 8.67 13.35 0.08 18.9 0.1 8.58 REF 11.35 FINISH: CONTACT AND SHIELD MATING AREA: MEETS THE PERFORMANCE REQUIREMENTS OF TYCO ELECTRONICS PRODUCT SPECIFICATION, 108-2055-1; BASED ON TELCORDIA GR-1217-CORE, APPLICATIONS IN UNCONTROLLED ENVIRONMENTS. COMPLIANT PIN AREA: 0.5µm MIN MATTE TIN OVER BASE PLATING. C REF 0.05 0.08 ROW B B R0W A 3 REF TYP 8.7 REF ROW D ROW C ROW DG (GROUND) 4 ROW BG (GROUND) ROW CG (GROUND) TOP SURFACE OF DAUGHTER CARD ROW B 0.05 ROW A 24.9 3.68 R 0 W AG (GROUND) B 8 RECOMMENDED PC BOARD LAYOUT, DAUGHTER BOARD, COMPONENT SIDE SHOWN SCALE 5:1 REF 1.7 (TERMINATION AREA) 8.84 MAX 1.5 REF +0.2 10.2 -0.1 A 1.1 REF 0.9 REF TYP 1.2 REF TYP 1.2 REF TYP THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 4805 (3/13) 2065769-2 3 2 - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - 3 - DWN 08MAY2009 CHK 08MAY2009 APVD 08MAY2009 S.J.MAGARO S.J.MAGARO N.SCHROLL NAME - APPLICATION SPEC - WEIGHT SIZE - CUSTOMER DRAWING 2065769-1 FINISH PART NUMBER TE Connectivity PRODUCT SPEC - 8 ASSEMBLY, Z-Pack HMZd Plus, RECEPTACLE, 2 PAIR - CAGE CODE A1 00779 DRAWING NO 2065769 SCALE 8:1 SHEET 1 RESTRICTED TO OF - 1 REV D A