MJD112 MJD117 Complementary power Darlington transistors Features . ■ Good hFE linearity ■ High fT frequency ■ Monolithic Darlington configuration with integrated antiparallel collector-emitter diode TAB 3 1 Application ■ TO-252 (DPAK) Linear and switching industrial equipment Description The devices are manufactured in planar technology with “base island” layout and monolithic Darlington configuration. Figure 1. Internal schematic diagram R1 typ. = 15 kΩ Table 1. R2 typ. = 100 Ω Device summary Order codes Marking Polarity Package Packaging MJD112T4 MJD112 NPN DPAK Tape and reel MJD117T4 MJD117 PNP DPAK Tape and reel January 2010 Doc ID 3540 Rev 3 1/10 www.st.com 10 Absolute maximum ratings 1 MJD112, MJD117 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Unit 100 V Collector-base voltage (IE = 0) VCEO Collector-emitter voltage (IB = 0) VEBO Emitter-base voltage (IC = 0) 5 V Collector current 2 A Collector peak current 4 A 0.05 A 20 W -65 to 150 °C 150 °C ICM IB Base current PTOT Total dissipation at Tcase = 25 °C TSTG Storage temperature TJ Max. operating junction temperature For PNP types voltage and current values are negative. Table 3. Symbol RthJC 2/10 Value VCBO IC Note: Parameter Thermal data Parameter Thermal resistance junction-case max. Doc ID 3540 Rev 3 Value Unit 6.25 °C/W MJD112, MJD117 2 Electrical characteristics Electrical characteristics Tcase = 25 °C; unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICEV Collector cut-off current (VBE = -1.5 V) VCE = 80 V VCE = 80 V, Tc = 125 °C - 10 0.5 µA mA ICBO Collector cut-off current (IE = 0) VCB = 80 V VCB = 100 V - 10 20 µA ICEO Collector cut-off current (IB = 0) VCE = 50 V - 20 µA IEBO Emitter cut-off current (IC = 0) VEB = 5 V - 2 mA Collector-emitter sustaining voltage (IB = 0) IC = 30 mA VCEO(sus)(1) 100 - V VCE(sat)(1) Collector-emitter saturation IC = 2 A voltage IC = 4 A IB = 8 mA - 2 IB = 40 mA - 3 VBE(sat)(1) Base-emitter saturation voltage IC = 4 A IB = 40 mA - 4 V VBE(on) Base-emitter on voltage IC = 2 A VCE = 3 V - 2.8 V IC = 0.5 A_ _ VCE = 3 V 500 - IC = 2 A_ VCE = 3 V 1000 - IC = 4 A_ _ VCE = 3 V 200 - IC = 0.75 A_ f = 1 MHz VCE = 10 V 25 - VCB = 10 V Collector base capacitance for MJD112 (IE = 0) for MJD117 f = 0.1 MHz hFE(1) fT CCBO DC current gain Transition frequency V - 12000 MHz 100 200 pF pF 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 % Note: For PNP types voltage and current values are negative. Doc ID 3540 Rev 3 3/10 Electrical characteristics 2.1 4/10 MJD112, MJD117 Typical characteristic (curves) Figure 2. DC current gain (VCE = 3 V NPN) Figure 3. DC current gain (VCE = - 3 V PNP) Figure 4. DC current gain (VCE = 5 V NPN) Figure 5. DC current gain (VCE = - 5 V PNP) Figure 6. Collector-emitter saturation voltage (NPN) Figure 7. Collector-emitter saturation voltage (PNP) Doc ID 3540 Rev 3 MJD112, MJD117 Figure 8. Electrical characteristics Base-emitter saturation voltage (NPN) Figure 10. Base-emitter on voltage (NPN) Figure 9. Base-emitter saturation voltage (PNP) Figure 11. Base-emitter on voltage (PNP) Figure 12. Resistive load switching time Figure 13. Resistive load switching time (NPN, on) (PNP, on) Doc ID 3540 Rev 3 5/10 Electrical characteristics MJD112, MJD117 Figure 14. Resistive load switching time Figure 15. Resistive load switching time (NPN, off) (PNP, off) 6/10 Doc ID 3540 Rev 3 MJD112, MJD117 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Doc ID 3540 Rev 3 7/10 Package mechanical data MJD112, MJD117 TO-252 (DPAK) mechanical data DIM. mm. min. ty p ma x . A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4. 70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 1 R V2 0.20 8o 0o 0068772_G 8/10 Doc ID 3540 Rev 3 MJD112, MJD117 4 Revision history Revision history Table 5. Document revision history Date Revision Changes 21-Jun-2004 2 Document migration, no content change. 21-Jan-2010 3 Modified TO-252 (DPAK) mechanical data. Doc ID 3540 Rev 3 9/10 MJD112, MJD117 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 3540 Rev 3