GBJ4A ~ GBJ4M Elektronische Bauelemente VOLTAGE 50V ~ 1000V 4.0 AMP Glass Passivated Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. ƔFEATURES . Surge overload rating – 125 amperes peak . Ideal for printed circuit board . Reliable low cost construction utilizing Molded plastic technique . Plastic material has underwrites laboratory Flammability classification 94V-0 . Polarity: marked on body . Mounting position: Any ƔMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 к ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. GBJ4A TYPE NUMBER SYMBOL Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 Maximum Average Forward (with heatsink Note2) I(AV) Rectified Current @ TC=100к(without heatsink) Peak Forward Surge Current, 8.3 ms single IFSM half Sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 2.0A VF Maximum DC Reverse Current Ta=25 к IR at Rated DC Blocking Voltage Ta=125 к I2t Rating for fusing (t<8.3ms) I2t Typical Junction Capacitance CJ per element (Note1) Typical Thermal Resistance (Note 2) RșJC Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Device mounted on 50mm x 50mm x 1.6mm Cu Plate Heatsink. http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A GBJ4B GBJ4D GBJ4G GBJ4J GBJ4K GBJ4M 100 70 100 200 140 200 400 280 400 4.0 2.4 600 420 600 800 560 800 1000 700 1000 UNITS V V V A 125 A 1.1 5.0 500 93 V A2S 45 pF 2.2 - 55 ~ + 150 - 55 ~ + 150 к/W к к µA Any changing of specification will not be informed individual Page 1 of 2 GBJ4A ~ GBJ4M Elektronische Bauelemente VOLTAGE 50V ~ 1000V 4.0 AMP Glass Passivated Bridge Rectifiers ƔRATING AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2