T-1 3/4 (5mm) SOLID STATE LAMP L-7113YD Description Features ! OUTSTANDING ! RELIABLE ! IC YELLOW MATERIAL EFFICIENCY. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide AND RUGGED. COMPATIBLE/LOW CURRENT CAPABILITY. Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA4399 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:NOV/30/2002 DRAWN:D.L.HUANG PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e L-7113YD Iv (m c d ) @ 10 m A L en s Ty p e YELLOW (GaAsP/GaP) YELLOW DIFFUSED V i ew i n g An g l e Min . Ty p . 2θ1/2 5 20 30° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λpeak Peak Wavelength Yellow λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un its Tes t Co n d it io n s 590 nm IF = 2 0 m A Yellow 588 nm IF = 2 0 m A Spectral Line Half-width Yellow 35 nm IF = 2 0 m A pF V F = 0 V;f= 1 M Hz 2.5 V IF = 2 0 m A 10 uA VR = 5V C Capacitance Yellow 20 VF Forward Voltage Yellow 2.1 IR Reverse Current Yellow Max . Absolute Maximum Ratings at TA=25°°C P ar am et er Yello w Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA4399 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:NOV/30/2002 DRAWN:D.L.HUANG PAGE: 2 OF 3 Yellow L-7113YD SPEC NO: DSAA4399 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:NOV/30/2002 DRAWN:D.L.HUANG PAGE: 3 OF 3