LASER DIODE NX8563LA Series 1 550 nm InGaAsP MQW-DFB LASER DIODE MODULE 2.5 Gb/s DIRECTLY MODULATION LIGHT SOURCE FOR DWDM APPLICATIONS DESCRIPTION The NX8563LA Series is a 1 550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode module with Single Mode Fiber. It is designed as directly modulation light source and ideal for optical transmission systems. The device is available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITU-T recommendations, enabling a wide range of applications. FEATURES • Peak output power Pf = 10 mW MIN. • Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid, please refer to the ORDERING INFORMATION) • Internal thermo-electric cooler and isolator • Hermetically sealed 14-pin butterfly package • Single mode fiber pigtail • Wide operation temperature range Document No. PL10428EJ02V0DS (2nd edition) Date Published September 2005 CP(K) The mark shows major revised points. NX8563LA Series PACKAGE DIMENSIONS (UNIT: mm) 15.24 2.54 TOP VIEW 8.89±0.13 10 MIN. 1.25 4– φ 2.67 #7 14 + – Cooler PD 12.7±0.2 8 6.0 1 0.9 7 LD 26.04±0.25 Function Pin No. 1 2 3 4 5 6 7 5.15 1.0 Optical Fiber (SMF) Length: 1 000 MIN. 0.3 Thermistor R #14 PIN CONNECTIONS 20.83±0.25 29.97±0.25 L #8 0.5 7.8±0.2 5.4 #1 20.8 Thermistor Thermistor Bias PD Anode PD Cathode Cooler Anode Cooler Cathode Pin No. 8 9 10 11 12 13 14 Function GND GND GND GND, LD Anode Signal Input GND GND OPTICAL FIBER DIMENSIONS (UNIT: mm) Parameter Outer Diameter Minimum Fiber Bending Radius Fiber Length Specification Unit 0.9±0.1 mm 30 mm 1 000 MIN. mm SMF SC-APC : Cut angle 8° SC-UPC Fiber Length: 1 000 mm MIN. 2 Data Sheet PL10428EJ02V0DS 8.99±0.5 mm 35±2 mm NX8563LA Series ORDERING INFORMATION NX8563LA CD : SC-APC CC : SC-UPC Wavelength Code : Refer to Table A Without : 240 km (4 320 ps/nm) S : 100 km (1 800 ps/nm) Table A: DWDM wavelength based on ITU-T recommendations (@TLD = Tset) Wavelength Code *1 ITU-T Wavelength Frequency (nm) (THz) 303 1 530.33 195.90 311 1 531.11 318 Wavelength Code *1 ITU-T Wavelength Frequency (nm) (THz) 509 1 550.91 193.30 195.80 517 1 551.72 193.20 1 531.89 195.70 525 1 552.52 193.10 326 1 532.68 195.60 533 1 553.32 193.00 334 1 533.46 195.50 541 1 554.13 192.90 342 1 534.25 195.40 549 1 554.94 192.80 350 1 535.03 195.30 557 1 555.74 192.70 358 1 535.82 195.20 565 1 556.55 192.60 366 1 536.60 195.10 573 1 557.36 192.50 373 1 537.39 195.00 581 1 558.17 192.40 381 1 538.18 194.90 589 1 558.98 192.30 389 1 538.97 194.80 597 1 559.79 192.20 397 1 539.76 194.70 606 1 560.60 192.10 405 1 540.55 194.60 614 1 561.41 192.00 413 1 541.34 194.50 421 1 542.14 194.40 429 1 542.93 194.30 437 1 543.73 194.20 445 1 544.52 194.10 453 1 545.32 194.00 461 1 546.11 193.90 469 1 546.91 193.80 477 1 547.71 193.70 485 1 548.51 193.60 493 1 549.31 193.50 501 1 550.11 193.40 *1 The value which omitted and computed the 3rd place below the decimal point Data Sheet PL10428EJ02V0DS 3 NX8563LA Series ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit Forward Current of LD IF 300 mA Reverse Voltage of LD VR 2.0 V Forward Current of PD IF 10 mA Reverse Voltage of PD VR 20 V Operating Case Temperature TC −20 to +85 °C Storage Temperature Tstg −40 to +85 °C Lead Soldering Temperature Tsld 260 (10 sec.) °C ELECTRO-OPTICAL CHARACTERISTICS (TLD = Tset, TC = −20 to +85°C) Parameter Symbol Conditions Laser Set Temperature Tset Forward Voltage VF Threshold Current Ith Optical Output Power from Fiber Pf Operation Current Iop Threshold Output Power Pth IF = Ith Quantum Efficiency η CW Peak Emission Wavelength λp Pf = 10 mW, CW, TLD = Tset Spectral Line Width ∆ν Pf = 10 mW, CW, 3 dB down Side Mode Suppression Ratio SMSR Pf = 10 mW MIN. TYP. MAX. Unit 30 45 °C 0.9 2.0 V 40 mA 20 IF = Iop, TLD = Tset 10 0.142 Pf = 10 mW, under modulation 1 530 mW mA 100 µW 0.17 ITU-T 1 30 125 W/A *1 1 562 nm 5 MHz 35 dB 25 Ω Input Impedance ZIN Relative Intensity Noise RIN Pf = 10 mW, 20 MHz to 3 GHz −140 dB/Hz Rise and Fall Time tr /tf 20-80%/80-20%, TC = 25°C 120 ps Input Return Loss S11 f = 50 MHz to 3 GHz 6 f = 3 GHz to 6 GHz 3 −3 dB, Pf = 10 mW 2.5 Band Width Dispersion Penalty BW DP *2 TC = 25°C *1 Available for DWDM wavelengths based on ITU-T recommendations (100 GHz grid, please refer to the ORDERING INFORMATION) *2 2.48832 Gb/s, PRBS 223−1, duty cycle, Extinction Ratio ≥ 8.5 dB, BER = 10−10, NX8563LAS: 1 800 ps/nm (100 km), NX8563LA: 4 320 ps/nm (240 km) 4 Data Sheet PL10428EJ02V0DS dB GHz 2.0 dB NX8563LA Series ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = Tset, TC = −20 to +85°C) Parameter Symbol Conditions MIN. TYP. Unit 2 000 µA Monitor Current Im Pf = 10 mW, VR = 5 V Dark Current ID VR = 5 V 10 nA Im = const. 0.6 dB γ Tracking Error *1 100 MAX. Pf *1 γ = 10 log 10 mW Pf (mW) TLD = Tset, TC = 25˚C 10 TLD = Tset, TC = –20 to +85˚C Pf 0 Im (@ Pf (25˚C) = 10 mW) Im ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = Tset, TC = −20 to +85°C) Parameter Symbol Conditions TLD = 25°C MIN. TYP. MAX. Unit 9.5 10.0 10.5 kΩ 3 350 3 450 3 550 K Thermistor Resistance R B Constant B Cooler Current IC ∆T = 85 − Tset, Pf = 10 mW 1.2 A Cooler Voltage VC ∆T = 85 − Tset, Pf = 10 mW 2.4 V Data Sheet PL10428EJ02V0DS 5 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.