C&K CM Series Single Pole Power Rocker Switches Features/Benefits Typical Applications • Illuminated versions available • Easy to install snap-in design • Multiple actuator and termination styles to choose from • • • • Computers and peripherals Power supplies Industrial equipment Small appliances Specifications Materials CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 1/8 HP; 10 AMPS @ 250 VAC, 1/3 HP. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, gloss or matte finish. ILLUMINATED ACTUATOR: Polycarbonate, gloss or matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages 20 thru 22. For additional options not shown in catalog, consult Customer Service Center. Switch Function CM101 SPDT On-None-On CM102 SPST On-None-Off CM103 SPDT On-Off-On CM107 SPDT On-Off-Mom. CM12 * SPST On-None-Off Actuator J1 Rocker J3 Illuminated rocker J6 Rocker J8 Illuminated rocker Actuator Color 2 (STD). Black 1 White 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 (STD.) Snap-in, black S4 (STD.) Snap-in, black S1 Snap-in, white Termination S3 Snap-in, white 05 (STD.) .250” quick connect 07 Solder lug Actuator Marking (NONE) (STD.) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF * CM12 - for switches with both marking and illumination Contact Rating QA (STD.) Silver Lamp Rating (NONE) (STD.) No lamp 7 125 VAC neon 8 250 VAC neon Dimensions are shown: Inch (mm) Dimensions subject to change 20 www.ittcannon.com C&K CM Series Single Pole Power Rocker Switches SWITCH FUNCTION CONNECTED TERMINALS SWITCH FUNCTION NO. POLES CM101 C&K marking on opposite side C&K marking on opposite side MODEL NO. ON NONE SCHEMATIC ON N/A CM102 ON NONE OFF OR 2-1 2-3 For Illuminated Version SP CM103 ON OFF ON CM107 ON OFF MOM. CM12 * ON NONE OFF OPEN * CM12 - for switches with both marking and illumination ACTUATOR J1 J3 J6 J8 ROCKER ILLUMINATED ROCKER NOTE: J3 actuator available with CM102 switch function only. ROCKER ILLUMINATED ROCKER NOTE: J8 actuator available with CM102 switch function only. Dimensions are shown: Inch (mm) Dimensions subject to change 21 www.ittcannon.com C&K CM Series Single Pole Power Rocker Switches ACTUATOR COLOR OPTION CODE ACTUATOR COLOR 2 1 3 R A G (STD.) BLACK WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED MOUNTING STYLE/COLOR S2 S1 S4 S3 (STD.) SNAP-IN, BLACK SNAP-IN, WHITE (STD.) SNAP-IN, BLACK (SHORT FRAME) SNAP-IN, WHITE PANEL PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “X” 1.189-.004 (30,2-0,1) 1.197-.004 (30,4-0,1) 1.212-.004 (30,8-0,1) “Y” 0.441+.004 (11,2+0,1) 0.441+.004 (11,2+0,1) 0.441+.004 (11,2+0,1) TERMINATION 05 07 (STD.) .250” QUICK CONNECT SOLDER LUG .709 (18,0) 1 2 3 1.124 (28,55) .063 DIA. (1,6ø) .429 (10,9) .031 (0,8) .250 (6,35) .185 (4,7) 1.071 (27,2) NOTE: Available with CM101 & CM102 switch functions only. Dimensions are shown: Inch (mm) Dimensions subject to change 22 www.ittcannon.com C&K CM Series Single Pole Power Rocker Switches ACTUATOR MARKING NONE H (STD.) NO MARKING D ON-OFF P OOl NOTE: Orientation of actuator marking and terminals. CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL QA (STD.) SILVER RATINGS POWER 16 AMPS @ 125 VAC; 1/8 HP 10 AMPS @ 250 VAC, 1/3 HP (UL/CSA). LAMP RATING (NONE) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON NOTE: Lamp rating for J3 & J8 actuator option. Dimensions are shown: Inch (mm) Dimensions subject to change 23 www.ittcannon.com