K500F Series 5V Crystal Clock Oscillators 4-pin Package, Compatible with 8-pin DIL 1.5MHz to 100MHz Frequency Range TTL/CMOS Compatible Tight Symmetry (45/55%) Available Tri-State Option Available ±100ppm Stability Standard - K1100FC Tighter Stabilities Available x. Ma mm 7 , 12 z F K5060.677 ME HCODE 6 TI DAT ax. mM m 7 12, C ±25ppm Stability:- K1100FA ±50ppm Stability:- K1100FB Case Ground for EMI Protection mm 5,5 x. Ma PIN 1 E L E C T R I C A L S P E C I F I C AT I O N S MODEL K500FA K500FB Frequency Range (MHz) K500FC 1.5 to 125 Frequency Stability (ppm) Overall Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 0°C to 70°C ±25 ±50 ±100 -40°C to 85°C N/A ±50 ±100 Temperature Range (°C) Operating -40°C to +85°C Storage -55°C to +125°C Supply Voltage (V) +5.0 ±5% Supply Current (mA) <30 Output TTL/CMOS “0” Level (VOL) 0.9 VCC “1” Level (VOH) 0.1 VCC Load Up to 80MHz 50pF; >80MHz 30pF TR & TF (ns) <10 Symmetry (%) 40/60 Jitter (Typical) 10ps RMS @ 90MHz Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E K500FXXXX - Specify Frequency “Blank” = Fixed Frequency “E” = Tri-State “Blank” = 0oC to 70oC Operating Temperature “M” = -40oC to 85oC Operating Temperature “Blank” = 40/60% Symmetry “S” = 45/55 Symmetry “A” ±25ppm Frequency Stability (Available 0/70oC only) “B” = ±50 ppm Frequency Stability “C” = ±100ppm Frequency Stability 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 1 K500F Series 5V Crystal Clock Oscillators PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC SHIPPING TUBE CROSS SECTION TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II 2 KV to 4 KV Threshold Solderability Hermeticity MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He Resistance to Soldering Lead Integrity MIL-STD-202, Mtd 210D, Cond. J 235°C; 30 seconds MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress Marking Permanence Life Test MIL-STD-883, Mtd 2015.8 MIL-STD-883, Mtd 1005.6 Resistance to solvents 125°C, powered, 1000 hours minimum 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 800-888-1499 or www.champtech.com 2