PRODUCT DATASHEET Virpi series last update 2/3/2017 DETAILS Product Number C12609_VIRPI-W Family Virpi Type Lens array Color clear Diameter 74,9 x 74,9 mm Height 9,5 mm Style square Optic Material PMMA Holder Material Fastening glue, pin Status production ready ROHS Compliant Yes Date Updated 2/03/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XP-G 48 deg Wide 92 % 1.300 - XT-E 41 deg Wide 90 % 1.680 - XB-D 40 deg Wide 90 % 1.740 - XP-E2 41 deg Wide 91 % 1.700 - XP-G2 49 deg Wide 91 % 1.300 - XH-B/G 43 deg Wide 91 % 1.500 - LG 3030 34 deg Wide 92 % 2.200 - LUXEON Rebel ES 42 deg Wide 91 % 1.620 - LUXEON T sim: 42 Wide sim: 93 % sim: 1.790 - LUXEON TX sim: 38 Wide sim: 93 % sim: 2.000 - LUXEON C sim: 30 Wide sim: 86 % sim: 2.500 - LUXEON SunPlus 20 Line sim: 29 Wide sim: 87 % sim: 2.500 - LUXEON SunPlus 35 Line sim: 26 Wide sim: 93 % sim: 3.000 - LUXEON 3535L sim: 28 Wide sim: 93 % sim: 2.800 - NVSxx19A 40 deg Wide 90 % 1.670 - NF2x757A 33 deg Wide 92 % 2.300 - NVSxx19B/NVSxx19C sim: 44 Wide sim: 94 % sim: 1.700 - Oslon Square EC 43 deg Wide 91 % 1.570 - Duris S5 (Single chip) 31 deg Wide 93 % 2.400 - OSCONIQ P 2226 32 deg Wide 90 % 2.200 - Oslon Square Gen3 sim: 36 Wide sim: 94 % sim: 1.900 - LM231 A/B 32 deg Wide 92 % LH351B sim: 55 Wide sim: 94 % sim: 1.171 - LH351C sim: 54 Wide sim: 94 % sim: 1.102 - 2.300 - January 31st 2018 2:03 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 45 15 15 45 4 4 15 15 9.4 3 3 1.9 74.9 Detail A Scale: 2:1 2 2 Material: - PMMA Tolerances if not otherwise shown: According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L This drawing is our property. It can't be reproduced or communicated without our written agreement. 1 DRAWN BY pl DATE 74.9 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Datasheet Virpi series 20.02.2012 CHECKED BY DATE DESIGNED BY DATE PL 03.02.2012 D SIZE DRAWING NUMBER A4 SCALE 1:1 WEIGHT(g) REV - 1 SHEET A 1/1 1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.