DN0150ALP4 / DN0150BLP4 NEW PRODUCT 50V NPN SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features Mechanical Data • • • • • • • • • Epitaxial Die Construction Ultra-Small Leadless Surface Mount Package Ultra Low Profile (0.4mm max) Complementary PNP Type Available (DP0150ALP4/DP0150BLP4) “Lead Free”, RoHS Compliant (Note 1) Halogen and Antimony Free, "Green" Device (Note 2) Qualified to AEC-Q101Standards for High Reliability • • • DFN1006H4-3 Case: DFN1006H4-3 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish ⎯ NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.0008 grams (approximate) C B B C E Bottom View Device Symbol E Top View Pin Configuration Ordering Information (Note 3) Product DN0150ALP4-7 DN0150ALP4-7B DN0150BLP4-7 DN0150BLP4-7B Notes: Marking T3 T3 T4 T4 Reel size (inches) 7 7 7 7 Tape width (mm) 8 8 8 8 Quantity per reel 3,000 10,000 3,000 10,000 1. No purposefully added lead. 2. Diodes Inc's "Green" policy can be found on our website at http://www.diodes.com 3. For packaging details, go to our website at http://www.diodes.com. Marking Information DN0150ALP4-7 DN0150BLP4-7 Tx Top View Dot Denotes Collector Side DN0150ALP4 / DN0150BLP4 Document number: DS31492 Rev. 4 - 2 DN0150ALP4-7B DN0150BLP4-7B Tx Tx = Product Type Marking Code T5 = DN0150ALP4 T6 = DN0150BLP4 Top View Bar Denotes Base and Emitter Side 1 of 5 www.diodes.com January 2011 © Diodes Incorporated DN0150ALP4 / DN0150BLP4 NEW PRODUCT Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current – Continuous Peak Pulse Collector Current Base Current Symbol VCBO VCEO VEBO IC ICM IB Value 60 50 5 100 200 30 Unit V V V mA mA mA Symbol PD RθJA TJ, TSTG Value 450 278 -55 to +150 Unit mW °C/W °C Thermal Characteristics Characteristic Power Dissipation (Note 4) Thermal Resistance, Junction to Ambient (Note 4) Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 5) Emitter-Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current ON CHARACTERISTICS (Note 5) Collector-Emitter Saturation Voltage DC Current Gain DN0150ALP4 DN0150BLP4 SMALL SIGNAL CHARACTERISTICS Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO 60 50 5 — — — — — — — — — — 0.1 0.1 V V V μA μA IC = 10μA, IE = 0 IC = 1mA, IB = 0 IE = 10μA, IC = 0 VCB = 60V, IE = 0 VEB = 5V, IC = 0 VCE(SAT) 0.10 — — 0.25 240 400 V IC = 100mA, IB = 10mA hFE — 120 200 — VCE = 6V, IC = 2mA Transition Frequency fT 60 — — MHz Output Capactiance Cob — 1.3 — pF Notes: Test Condition VCE = 10V, IE = -1mA f = 30MHz VCB = 10V, IE = 0, f = 1MHz 4. Device mounted on FR-4 PCB with minimum recommended pad layout. 5. Measured under pulsed conditions. Pulse width = 300µs. Duty cycle ≤2% DN0150ALP4 / DN0150BLP4 Document number: DS31492 Rev. 4 - 2 2 of 5 www.diodes.com January 2011 © Diodes Incorporated DN0150ALP4 / DN0150BLP4 0.20 IC, COLLECTOR CURRENT (A) PD, POWER DISSIPATION (W) 500 400 300 200 100 0.15 IB = 1mA IB = 2mA IB = 3mA 0.10 IB = 4mA IB = 5mA 0.05 RθJA = 278°C/W 0 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3) 0 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN TA = 85°C T A = 25°C TA = -55°C 100 10 0.1 1 10 100 IC, COLLECTOR CURRENT (mA) Fig. 3 Typical DC Current Gain vs. Collector Current (DN0150BLP4) IC/IB = 10 1.0 0.8 TA = -55°C 0.6 T A = 25°C TA = 85°C T A = 150°C 0 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) Fig. 5 Typical Base-Emitter Turn-On Voltage vs. Collector Current DN0150ALP4 / DN0150BLP4 Document number: DS31492 Rev. 4 - 2 1 IC/IB = 10 TA = 150°C 0.1 T A = 85°C TA = 25°C TA = -55°C 0.01 0.0001 1,000 1.2 0.2 5 VCE = 6V 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) TA = 150°C 0.4 1 2 3 4 VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage (DN0150BLP4) 1 1,000 VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V) NEW PRODUCT 600 3 of 5 www.diodes.com 1.2 VCE = 6V 1.0 0.8 T A = -55°C 0.6 0.4 TA = 25°C TA = 85°C T A = 150°C 0.2 0.0001 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) Fig. 6 Typical Base-Emitter Saturation Voltage vs. Collector Current January 2011 © Diodes Incorporated DN0150ALP4 / DN0150BLP4 320 100 fT, GAIN-BANDWIDTH PRODUCT (MHz) CAPACITANCE (pF) NEW PRODUCT f = 1MHz 10 Cibo 1 Cobo 0 0.1 280 240 200 160 120 80 40 VCE = 6V f = 30MHz 0 0 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 7 Typical Capacitance Characteristics 2 4 6 8 IC, COLLECTOR CURRENT (mA) Fig. 8 Typical Gain-Bandwidth Product vs. Collector Current 10 Package Outline Dimensions DFN1006H4-3 Dim Min Max Typ A 0.40 ⎯ ⎯ A1 0 0.05 0.02 b1 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.35 ⎯ ⎯ L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 0.40 ⎯ ⎯ All Dimensions in mm A A1 D b1 E e b2 L2 L3 L1 Suggested Pad Layout C Dimensions Z G1 G2 X X1 Y C X1 X G2 Value (in mm) 1.1 0.3 0.2 0.7 0.25 0.4 0.7 G1 Y Z DN0150ALP4 / DN0150BLP4 Document number: DS31492 Rev. 4 - 2 4 of 5 www.diodes.com January 2011 © Diodes Incorporated DN0150ALP4 / DN0150BLP4 NEW PRODUCT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com DN0150ALP4 / DN0150BLP4 Document number: DS31492 Rev. 4 - 2 5 of 5 www.diodes.com January 2011 © Diodes Incorporated