Clairex CLD240W Silicon pin photodiode Datasheet

CLD240 Series
®
UPGRADED SERIES
Silicon PIN Photodiodes
Clairex
Technologies, Inc.
CLD240 replaces CLD142 and CLD142R
CLD240E replaces CLD140
CLD240W replaces CLD141 and CLD141R
features
• TO-46 header with three lens options
• cathode connected to case
• large photosensitive area
• usable for visible through near-IR

May, 2005
description
The CLD240 series are new, direct replacements for the older
CLD140 series and feature larger (0.060” x 0.060”) active area
silicon PIN photodiode chips. Also featured are faster switching
and lower junction capacitance. Three different lensing options
are offered which satisfy the majority of application requirements.
Contact Clairex for other packaging options.
0.158 (4.01)
0.136 (3.45)
0.100 (2.54) dia.
1.00 (25.4) min.
0.210 (5.33)
0.190 (4.83)
0.215 (5.46)
0.205 (5.21)
CATHODE
0.190 (4.83)
0.176 (4.47)
ANODE
0.025 (0.64) max.
0.050 (1.27)
0.030 (0.76)
0.147 (3.73)
0.137 (3.48)
0.019 (0.48)
0.016 (0.41)
CLD240
0.130 (3.30) max
0.213 (5.41)
0.207 (5.26)
1.00 (25.4) min.
0.050 (1.27) max
0.100 (2.54) pin circle
CATHODE
0.169 (4.29)
0.163 (4.14)
ANODE
0.010 (0.25) nom
0.147 (3.73)
0.137 (3.48)
0.019 (0.48)
0.016 (0.41)
C
5
CLD240E
0.165 (4.19)
0.145 (3.68)
0.156 (3.96)
0.136 (3.45)
0.100 (2.54) dia.
1.00 (25.4) min.
0.215 (5.46)
0.205 (5.21)
CATHODE
0.190 (4.83)
0.176 (4.47)
ANODE
0.025 (0.64) max.
0.019 (0.48)
0.016 (0.41)
0.010 (0.25) max
0.147 (3.73)
0.137 (3.48)
CLD240W
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: 972-265-4900
1301 East Plano Parkway
Fax: 972-265-4949
Revised 3/15/06
Plano, Texas 75074-8524
www.clairex.com
CLD240 Series
®
Silicon PIN Photodiodes
Clairex
Technologies, Inc.
absolute maximum ratings (TA = 25°C unless otherwise stated)
storage and operating temperature
CLD240 and CLD240W .............................................................-65°C to +150°C
CLD240E....................................................................................-40°C to +125°C
lead soldering temperature(1) ......................................................................... 260°C
reverse voltage..................................................................................................60V
note:
1. 0.06” (1.5mm) from the header for 5 seconds maximum.
electrical characteristics (TA = 25°C unless otherwise noted)
symbol parameter
CLD240 Series
min
typ
max
units
Junction capacitance
Breakdown voltage
Output rise and fall time
60
-
14
15
10
10
20
nA
nA
pF
V
ns
Short-circuit current(2)
Total angle at half sensitivity points
30
-
40
14
-
µA
deg.
VBIAS = 0V
Short-circuit current(2)
Total angle at half sensitivity points
10
-
13
80
-
µA
deg.
VBIAS = 0V
ISC
Short-circuit current(2)
θHP
Total angle at half sensitivity points
note: 2. Ee = 1mW/cm2, λ = 850nm.
10
-
13
70
-
µA
deg.
VBIAS = 0V
ID
Dark current
CJ
VBR
tr, tf
CLD240
ISC
θHP
CLD240E
ISC
θHP
test conditions
VR = 20V, Ee = 0
VF = 100mV, Ee = 0
VBIAS = 0V, f = 1MHz, Ee = 0
IR = 30µA, Ee = 0
RL = 1KΩ
CLD240W
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Clairex Technologies, Inc.
Phone: 972-265-4900

1301 East Plano Parkway
Fax: 972-265-4949
Plano, Texas 75074-8524
www.clairex.com
Similar pages