RoHS AHC40 Axial High Current Chokes Dimensions (In.) See Table D A C C B Allied Part Number Inductance (µh) AHC40-1-500K-RC Rated A B C D Current Max. Max. Max. AWG Max. (A) (Inches) (Inches) (Inches) Features SRF Min. (MHz) DCR Max. (Ω) 50 4.0 .12 1 .800 .475 1.25 20 AHC40-1-101K-RC 100 2.0 .18 1 .800 .475 1.25 20 AHC40-1-251K-RC 250 1.0 .30 1 1.05 .475 1.25 20 AHC40-1-501K-RC 500 .8 .50 1 1.05 .550 1.25 20 AHC40-1-102K-RC 1000 .5 .60 1 1.17 .550 1.25 20 AHC40-2-270K-RC 27 5.5 .085 2 .800 .500 1.25 20 AHC40-2-500K-RC 50 4.0 .10 2 .800 .500 1.25 20 AHC40-2-101K-RC 100 2.0 .15 2 .920 .500 1.25 20 AHC40-2-251K-RC 250 1.0 .25 2 .920 .600 1.25 20 Current Rating: Max. continuous operating AHC40-2-501K-RC 500 .5 .45 2 1.05 .750 1.25 20 Dielectric Rating: 2500 V RMS, 60 Hz AHC40-3-5R0K-RC 5 25.0 .025 3 .800 .475 1.25 20 applied for one min. between winding and AHC40-3-100K-RC 10 20.0 .035 3 .920 .475 1.25 20 insulation sleeve edge. AHC40-3-270K-RC 27 6.0 .05 3 .800 .550 1.25 20 AHC40-3-500K-RC 50 4.0 .065 3 .920 .500 1.25 20 AHC40-3-101K-RC 100 2.0 .075 3 1.17 .500 1.25 18 AHC40-5-5R0K-RC 5 50.0 .015 5 1.05 .475 1.25 18 AHC40-5-100K-RC 10 40.0 .025 5 1.05 .475 1.25 18 AHC40-5-270K-RC 27 7.0 .035 5 1.05 .700 1.25 18 AHC40-5-500K-RC 50 2.0 .05 5 1.05 .700 1.25 18 AHC40-5-101K-RC 100 1.0 .065 5 1.30 .700 1.25 18 • Axial leads for through-hole PC board mounting. • Pre-tinned leads. • Low cost construction • Designed for use with switching power supplies and other high current filtering applications. Electrical Inductance: Measured at 1KHz with no DC current. Rated current will decrease inductance by 10% or less. Tolerance: 10% over entire inductance range. Available in tighter tolerances. current (DC or RMS) at room temp. outer circumference to within .25° of the Temp. Rating: Continuous operation at temp. between -55 and +105 ° C. Mechanical Winding: layered solenoid type on magnetic core. Wire: Solid soft copper. Leads: Tinned copper wire. Cover: U.L. shrink tubing Physical Packaging: 100 pieces per tray. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL Revised 03-16-12 www.alliedcomponents.com