PHOTODIODE Ø0.60 mm AXUVHS11 FEATURES • SMA connector • Ideal for electron detection • Ultra high speed Dimensions are in inch [metric] units. ELECTRO-OPTICAL CHARACTERISTICS AT 25°C PARAMETERS Active Area Responsivity, R TEST CONDITIONS MIN TYP MAX 0.28 Ø0.60mm UNITS mm2 (see graphs on next page) 55 Reverse Breakdown Voltage, VR IR = 1μA Volts Junction Capacitance VR = 0V 100 pF ResonseTime VR = 52V 700 psec Dark Current VR = 52V 10 nA THERMAL PARAMETERS STORAGE AND OPERATING TEMPERATURE RANGE Ambient1 -10° TO 40°C2 Nitrogen or Vacuum -20°C TO 80°C Maximum Junction Temperature 70°C Lead Soldering Temperature2 260°C 1 Temperatures exceeding these parameters may create oxide growth on the active area. Over time responsivity to low energy radiation and wavelengths below 150nm will be compromised. 2 0.080" from case for 10 seconds. Maximum torque of 5 inch/pounds recommended. Permanent damage will result if higher torque values are used and warranty is voided. 1260 Calle Suerte, Camarillo, California 93012 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision April 14, 2015 PHOTODIODE 1 mm2 RESPONSIVITY (A/W) 0.30 AXUVHS11 ELECTRON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 100 1000 10,000 100,000 ENERGY (ev) RESPONSIVITY (A/W) 0.30 EUV-UV PHOTON RESPONSE 0.25 0.20 0.15 0.10 0.05 0.00 0 RESPONSIVITY (A/W) 0.5 50 100 150 WAVELENGTH (nm) 200 250 UV-VIS-NIR PHOTON RESPONSIVITY 0.4 0.3 0.2 0.1 0.0 200 300 400 500 600 700 800 900 1000 1100 WAVELENGTH (nm) 1260 Calle Suerte, Camarillo, California 93012 Phone: (805) 499-0335, Fax: (805) 499-8108 Email: [email protected], Website: www.optodiode.com Revision February 26, 2013