s NMA 2100 NOISE SOURCE SERIES 100HZ TO 1GHZ 6.2008 DESCRIPTION DIP package T package The NMA 2100 High Power Noise Source Series are designed for testing wideband systems (CDMA, spread spectrum, FM, VHF, UHF) with wideband signals. Available in standard 24 Pin DIP packages for easy system integration, as well as SMA connectorized packages. SPECIFICATIONS NMA 2100 OUTPUT CHARACTERISTICS MODEL* FREQUENCY NOISE OUTPUT LEVEL µV/√=Hz dBm/BAND FLATNESS mV/BAND ±1.0dB 177 561 NMA-2102 + 100Hz-100kHz + 100Hz-300kHz ±1.0dB 300 550 NMA-2103 + 100Hz-1MHz ±1.0dB 300 300 NMA-2104 + 100Hz-3MHz ±1.0dB 300 174 NMA-2105 + 100Hz-10MHz ±1.0dB 300 NMA-2106 + 100Hz-30MHz ±1.0dB 300 NMA-2107 1kHz-100MHz ±1.5dB NMA-2108 1kHz-300MHz ±2.0dB NMA-2109 1kHz-500MHz ±2.0dB NMA-2101 dBm/Hz ENR(dB) -2.0 -52.0 122.0 +2.6 -52.2 121.8 +2.6 -57.5 116.5 +2.6 -62.2 111.8 95 +2.6 -67.5 106.5 55 +2.6 -72.2 101.8 300 30 +2.6 -77.4 96.6 300 17 +2.6 -82.2 91.8 300 13 +2.6 -84.4 89.6 NMA-2110 1kHz-1GHz ±2.0dB 300 10 +2.6 -87.4 86.6 * Available in SMA connectorized package, specify on quote/orders by adding “S” to Model No. + Low frequency limit of 100Hz requires a 47mf capacitor wired between pins 13 and 15. Low frequency limit is 500 Hz without capacitor for 50 ohm models only. Warning: when using a narrow band filter following the noise module, use a 3 dB or greater pad to prevent damage caused by reflected power. ■ Operating Temperature: -55 to +95oC ■ Storage Temperature: -65 to +125oC ■ Supply Voltage: +15 VDC ■ Temperature Stability: 0.025 dB/oC ■ Output Impedance: 50 ohm ■ Peak Factor: 5:1 APPLICATIONS ■ Back-up source in redundant transmitters ■ Built-in self-test in communication receivers ■ Power distribution in cellular base stations ■ Component testing reference pakage styles: E , T, S for dimensions MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 WEB: WWW.MICRONETICS.COM