AM1 AM1 (NZ BASIC) SWITCHES HIGH CONTACT CAPACITY, PRECISE OPERATION 17.5 49.2 24.1 FEATURES TYPICAL APPLICATION • 10 A High current switching capacity and high precision • Wide allowance of operating speed • Versatile variety of actuators • UL/C-UL approved • General industrial machinery • Medical equipment • Measuring instruments • Transportation equipment • Home electric appliances RoHS compliant ORDERING INFORMATION Ex. AM Type of switch NZ basic (AM1) switch 1 5 1 Basic specifications 0: Standard type 1: Oil tight type 3: Reversed action type 4: One way type Upper body cover shape & terminal 1: Flat, solder terminal 3: Flat, screw terminal 5: Grooved, solder terminal 7: Grooved, screw terminal 0 Upper body cover shape Flat Grooved F Actuators Contact 0: Pin plunger 1: Hinge lever (leaf spring) 3: Hinge roller lever (roller, leaf, spring) 4: Hinge short roller lever 5: Overtravel plunger 6: Compact overtravel plunger 7: Panel mount plunger 811: Panel mount roller plunger 812: Panel mount cross roller plunger Remarks: Not every combination is available. Please refer to the following table, “PRODUCT TYPES”. F: Cadmium free TERMINAL VARIATION Standard types, reversed action types and oil tight types are available in two terminal designs, solder and screw terminals, as shown in the above columns: Differences in dimension between solder and screw terminals are as follows; mm Solder terminal Screw terminal 6.3 9.1 49.2 49.2 N.O. CIRCUT C NO NC 17.5 17.5 N.C. CIRCUT Terminal plate Panasonic Corporation 19.8 M4 screw P0.7 20.2 Automation Controls Business Unit industrial.panasonic.com/ac/e AECTB8E 201201-T AM1 PRODUCT TYPES 1. Standard type Actuator Pin plunger Over travel plunger Compact over travel plunger Panel mount plunger Panel mount roller plunger Panel mount cross roller plunger Flexible leaf lever Flexible roller leaf lever Rigid lever Rigid short roller lever Rigid roller lever One way type•Rigid short roller lever One way type•Rigid roller lever Reversed action type•Rigid lever Reversed action type •Rigid short roller lever Reversed action type•Rigid roller lever Solder terminal AM1100F AM1105F AM1106F AM1107F AM110811F AM110812F AM1101F AM1103F AM1501F AM1504F AM1503F AM1544F AM1543F AM1531F AM1534F AM1533F Screw terminal AM1300F AM1305F AM1306F AM1307F AM130811F AM130812F AM1301F AM1303F AM1701F AM1704F AM1703F AM1744F AM1743F AM1731F AM1734F AM1733F Solder terminal AM1511F AM1514F AM1513F Screw terminal AM1711F AM1714F AM1713F 2. Oil tight types Actuator Rigid lever Rigid short roller lever Rigid roller lever Remarks: 1. Standard part number indicates UL/C-UL mark. 2. Standard packing for inner carton: 20cps. SPECIFICATIONS 1. Contact Rating Type Standard types One way types Reversed action types Oil tight types Voltage Resistive load (cos φ = 1) Inductive load (cos φ = 0.6 to 0.7) 125 V AC 250 V AC 480 V AC 125 V DC 250 V DC 125 V AC 250 V AC 125 V DC 10 A 10 A 1A 0.5 A 0.25 A 10 A 10 A 0.5 A 6A 6A 0.5 A 0.05 A 0.03 A 6A 6A 0.05 A Motor or lamp load N.C. 3A 2A — — — 3A 2A — N.O. 1.5 A 1A — — — 1.5 A 1.0 A — 2. Characteristics Item Pin plunger types (O.T.: specified value) Expected life Mechanical Other types (O.T.: specified value) Electrical (O.T.: Max.) Insulation resistance Between open terminals Dielectric Between each terminal and other exposed metal parts strength Between each terminal and ground Contact resistance (initial) (by voltage drop, 1 A, 6–8 V DC) Vibration resistance (Pin plunger type) Pin plunger types Shock resistance Other types Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Weight AECTB8E 201201-T Panasonic Corporation Specifications Min. 2 ×107 (60 cpm) (at rated overtravel) (Oil tight: Min. 1.5 ×106) Min. 5 ×106 (60 cpm) (at rated overtravel) (Oil tight: Min. 1.5 ×106) Min. 5 ×105 (20 cpm) (at rated load) (Oil tight: Min. 1.5 ×105) Min. 100 MΩ(at 500 V DC) 1,000 Vrms for 1 min. 2,000 Vrms for 1 min. 2,000 Vrms for 1 min. Max. 50 mΩ Single amplitude: 0.75 mm, 10 to 55 Hz (contact opening: max. 1 msec.) Min. 300 m/s2 (contact opening: max. 1 msec.) Min. 50 m/s2 (contact opening: max. 1 msec.) 0.1 to 1,000 mm/sec. (at pin plunger position) 240 cpm –25°C to +80°C (no freezing at low temperature) Approx. 20 to 55 g Automation Controls Business Unit industrial.panasonic.com/ac/e AM1 OPERATING CHARACTERISTICS Standard types Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Pin plunger Overtravel plunger Compact overtravel plunger Panel mount plunger 1.5 21.2±0.5 5.6 21.8±0.8 Flexible leaf lever Flexible roller leaf lever 3.63 N 1.12 N 0.4 0.05 0.13 15.9±0.4 1.5 28.2±0.5 Panel mount roller plunger Panel mount cross roller plunger 3.63 N 1.12 N 0.4 0.05 3.6 33.3±1.2 1.47 N 0.14 N 4 1.3 1.6 17.5±0.8 28.6±0.8 Standard types (cont' d) Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Rigid lever 0.69 N 0.14 N 10 1.3 5.6 19.1±0.7 Rigid short roller lever 1.57 N 0.42 N 4.5 0.7 2.4 30.2±0.4 Rigid roller lever 0.98 N 0.2 N 7.5 1.3 3.6 30.2±0.7 One way types Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Free position, max. mm Operating position, mm Rigid short roller lever 2.23 N 0.42 N 3.5 0.4 1.5 31.8 30.2±0.4 Rigid roller lever 1.67 N 0.42 N 4.5 0.5 2.4 43.3 41.3±0.4 Reversed action types Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Rigid lever 1.67 N 0.27 N 5.0 0.9 5.6 19.1±0.8 Rigid short roller lever 5.30 N 1.67 N 2.5 0.4 2.0 30.2±0.5 Rigid roller lever 2.35 N 0.56 N 3.6 0.7 4.0 30.2±0.8 Rigid lever 0.69 N 0.14 N 10 1.5 5.6 19.1±0.7 Rigid short roller lever 1.67 N 0.42 N 4.5 0.7 2.4 30.2±0.4 Rigid roller lever 0.98 N 0.20 N 7.5 1.3 3.6 30.2±0.7 Oil tight types Types of actuator Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e AECTB8E 201201-T AM1 DIMENSIONS The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e mm General tolerance: ±0.4 1. Standard types Pin plunger CAD Data P.T. 2.4 O.P. AM1100F (Solder terminal) AM1300F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 23.3±0.3 14.6 15 5.4 9.1 4.2 +0.1 −0.05 dia. hole 4.2 +0.1 −0.05 4.5±0.1 25.4±0.1 49.2 17.5 11.9 3.63 N 1.12 N 0.4 0.05 0.13 15.9±0.4 Overtravel plunger CAD Data 23.3±0.3 Plunger: Hardening steel P.T. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 4 dia. 6.35 dia. 8.4 O.P. 15 AM1105F (Solder terminal) AM1305F (Screw terminal) 3.63 N 1.12 N 0.4 0.05 1.5 28.2±0.5 Compact over plunger CAD Data Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm Plunger: Plastic P.T. 0.4 max. 23.3 ±0.3 7.1 dia. 4.2 O.P. 21.2 ±0.5 4.2 +0.10 –0.05 14.3 14.5 AM1106F (Solder terminal) AM1306F (Screw terminal) 4.2 +0.10 –0.05 dia. 3.63 N 1.12 N 0.4 0.05 1.5 21.2±0.5 Panel mount plunger CAD Data Plunger: Plastic P.T. 0.4 max. O.P. 21.8 ±0.8 R8 23.3 ±0.3 M12 × P1 Lock nut (2 thick) Nut (2 thick) 13.1 +0.10 16 ±0.5 4.2 –0.05 AM1107F (Solder terminal) AM1307F (Screw terminal) AECTB8E 201201-T 8.25 dia. 14.3 4.2 +0.10 –0.05 dia. Panasonic Corporation Automation Controls Business Unit Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 3.63 N 1.12 N 0.4 0.05 5.6 21.8±0.8 industrial.panasonic.com/ac/e AM1 mm General tolerance: ±0.4 Panel mount roller plunger CAD Data ° 90 P.T. 0.4 max. Roller 12.7 dia. × 4.6 : Plastic 23.3 ±0.3 M12 × P1 O.P. 33.3 ±1.2 Nut (2 thick) 15.5 AM110811F (Solder terminal) AM130811F (Screw terminal) +0.10 16 ±0.5 4.2 –0.05 14.3 Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 3.63 N 1.12 N 0.4 0.05 3.6 33.3±1.2 4.2 +0.10 –0.05 dia. Panel mount cross roller plunger CAD Data ° 90 P.T. 0.4 max. 23.3 Roller 12.7 dia. × 4.6 : Plastic ±0.3 M12 × P1 O.P. 33.3 ±1.2 Nut (2 thick) 15.5 +0.10 16 ±0.5 4.2 –0.05 14.3 AM110812F (Solder terminal) AM130812F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 3.63 N 1.12 N 0.4 0.05 3.6 33.3±1.2 4.2 +0.10 –0.05 dia. Dimensions and Operating characteristics are the same as those of Panel mount roller plunger type. However, the roller joins the switch body at an angle of 90°. Flexible leaf lever CAD Data 49.6±0.8 Leaf: Stainless steel 4.8 F.P. O.P. 14.6 AM1101F (Solder terminal) AM1301F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 1.47 N 0.14 N 4 1.3 1.6 17.5±0.8 Flexible roller leaf lever CAD Data Roller 9.5 dia.×4: Plastic 46±0.8 Leaf: Stainless steel F.P. O.P. 14.6 AM1103F (Solder terminal) AM1303F (Screw terminal) Panasonic Corporation Automation Controls Business Unit Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm industrial.panasonic.com/ac/e 1.47 N 0.14 N 4 1.3 1.6 28.6±0.8 AECTB8E 201201-T AM1 mm General tolerance: ±0.4 Rigid lever CAD Data Lever: Stainless steel 26.1 R63.5 4.8 F.P. 20.1±0.5 O.P. AM1501F (Solder terminal) AM1701F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 0.69 N 0.14 N 10 1.3 5.6 19.1±0.7 Rigid short roller lever CAD Data Roller 9.5 dia.×4: Plastic 26.1 R26.7 O.P. F.P. 20.1±0.5 AM1504F (Solder terminal) AM1704F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 1.57 N 0.42 N 4.5 0.7 2.4 30.2±0.4 Rigid roller lever CAD Data Roller 9.5 dia.×4: Plastic 26.1 R48.3 F.P. O.P. 20.1±0.5 AM1503F (Solder terminal) AM1703F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 0.98 N 0.2 N 7.5 1.3 3.6 30.2±0.7 2. One way types This type is operated only to one direction, not to the reversed direction by the construction of the roller lever, pivoting away from the cam on the return stroke. Rigid short roller lever CAD Data Roller 4.75 dia.×4.75: Plastic 26.1 R21.1 27.8 max. 20.1±0.5 O.P. F.P. AM1544F (Solder terminal) AM1744F (Screw terminal) AECTB8E 201201-T Panasonic Corporation Automation Controls Business Unit Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 2.23 N 0.42 N 3.5 0.4 1.5 30.2±0.4 industrial.panasonic.com/ac/e AM1 mm General tolerance: ±0.4 Rigid roller lever CAD Data Roller 9.5 dia.×4: Plastic 26.1 R31 F.P. O.P. 34.1 max. 20.1±0.5 AM1543F (Solder terminal) AM1743F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 1.67 N 0.42 N 4.5 0.5 2.4 41.3±0.4 3. Reversed action types When the actuator is operated, the switching mechanism returns to the free position. Extraordinary force by pushing the plunger too much is not put on the switching mechanism, which means stability in life. Rigid lever CAD Data Lever: Stainless steel 18.7 R56 4.8 20.1±0.5 16.9±0.8 O.P. F.P. 9.1 4.2 +0.1 −0.05 dia. hole 4.2 +0.1 −0.05 AM1531F (Solder terminal) AM1731F (Screw terminal) 11.9 4.5±0.1 25.4±0.1 17.5 11.9 49.2 Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 1.67 N 0.27 N 5.0 0.9 5.6 19.1±0.8 Rigid short roller lever CAD Data Roller 9.5 dia.×4: Plastic 18.7 R19 O.P. F.P. 20.1±0.5 AM1534F (Solder terminal) AM1734F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 5.30 N 1.67 N 2.5 0.4 2.0 30.2±0.5 Rigid roller lever CAD Data Roller 9.5 dia.×4: Plastic 18.7 R41 O.P. 20.1±0.5 AM1533F (Solder terminal) AM1733F (Screw terminal) Panasonic Corporation Automation Controls Business Unit F.P. Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm industrial.panasonic.com/ac/e 2.35 N 0.56 N 3.6 0.7 4.0 30.2±0.8 AECTB8E 201201-T AM1 mm General tolerance: ±0.4 4. Oil tight types The pushbutton part is sealed with the rubber cap and the connected part between the cap and body is also coated with resin so that these parts are kept away from foreign matters. This type has resistance to oil. Rigid lever CAD Data Plunger seal Lever: Stainless steel 26.1 R63.5 4.8 F.P. 20.1±0.5 O.P. AM1511F (Solder terminal) AM1711F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 0.69 N 0.14 N 10 1.5 5.6 19.1±0.7 Rigid short roller lever CAD Data Plunger seal Roller 9.5 dia.×4: Plastic 26.1 R26.7 O.P. 20.1±0.5 F.P. 16.9±0.8 AM1514F (Solder terminal) AM1714F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 1.67 N 0.42 N 4.5 0.7 2.4 30.2±0.4 Rigid roller lever CAD Data Roller 9.5 dia.×4: Plastic Plunger seal 26.1 R48.3 F.P. O.P. 20.1±0.5 16.9±0.8 AM1513F (Solder terminal) AM1713F (Screw terminal) Operating force, max. Release force, min. Pretravel, max. mm Movement differential, max. mm Overtravel, min. mm Operating position, mm 0.98 N 0.20 N 7.5 1.3 3.6 30.2±0.7 NOTES 1. Regarding fastening of switch body 1) In fastening the switch body, use M4 mounting screws to attach switches with the torque 1.5 N·m or less. 2) After mounting and wiring, the insulation distance between ground and each terminal should be confirmed as sufficient. 2. Adjustment of the operating device The operating device should be positioned so that it applies no stress to the pushbutton or actuator when the switch is in the open position. If this condition is exceeded, the mechanical and electrical performance will be AECTB8E 201201-T impaired. In addition, the force applied by the operating device should be in a perpendicular direction. Even if the pushbutton is used in the full total travel position, there will be no influence on the life of the switch. 3. Soldering operations Soldering should be done in less than 5 seconds, with a 60 watt iron (tip temperature = 350°C max.). Care should be taken not to apply force to the terminal during soldering. Panasonic Corporation Automation Controls Business Unit 4. Avoid using switches in the following conditions: • In corrosive gases such as hydrogen sulfide. • In flammable or explosive gases such as gasoline or thinner etc. • In a dusty environment. • In an ambient humidity over 85%. • In conditions where the perpendicular operating speed is less than 0.1 mm/sec. or more than 1,000 mm/sec. • In a silicon atmosphere. 5. Others Caution should be taken not to drop switches. industrial.panasonic.com/ac/e