NH Series IDC Type Socket w/o Latch Blocks (1.27mm Pitch) (SCSI-3) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: Part Number (Details) NHS 068T3 - 000 - BS * 500MΩ min. 250V AC rms for 1 minute 35mΩ max. 1A –55°C to +105°C Series (socket) No. of Leads Terminal Type: 0 = IDC for Flat Cable Materials and Finish Housing: PBT (glass filled), UL94V-0 Contacts: Phosphor Bronze Plating: Mating Face - Gold over Nickel IDC Terminals - Solder over Nickel Contact Plating: B = Mating Face Cont.- Au (15µ“) over Ni S = IDC Terminals - Solder over Ni Features Tapping Dimensions: 0 = 4-40 UNC 1 = 2-56 UNC ¼ Half pitch interface connector with SCSI-II pin type contacts Applicable Cables 0.635mm pitch flat cable, AWG 30 (7/0.1) stranded wire. (e.g. FLEX-*2*, see Section E) Outline Socket Dimensions H E ±0.05 Strain Relief Row-A #1 Terminal A 10.30 2.54 1.27 Row-B #1 Terminal C E ±0.05 4.00 3.70 5.54 5.00 10.30 Cover 5.10 0.635 0 D +– 0.10 8.70 2.54 A Part Number NHS068T3-000-BS* Sockets and Connectors No. of Leads A B C D E F G H 68 41.91 51.50 63.88 49.30 46.13 47.10 49.20 57.91 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division NH Series IDC Type Socket with Latch Blocks (1.27mm Pitch) (SCSI-2) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Operating Temp. Range: Part Number (Details) NHS 068T - 000 - BS * 500MΩ min. 250V AC rms for 1 minute 35mΩ max. 1A –55°C to +105°C Series (socket) No. of Leads Terminal Type: 0 = IDC for Flat Cable Materials and Finish Housing: PBT (glass filled), UL94V-0 Contacts: Phosphor Bronze Plating: Mating Face - Gold over Nickel IDC Terminals - Solder over Nickel Contact Plating: B = Mating Face Cont.- Au (15µ“) over Ni S = IDC Terminals - Solder over Ni Features Tapping Dimensions: 0 = 4-40UNC 1 = 2-56 UNC with Latch Blocks ¼ Half pitch interface connector with SCSI-II pin type contacts Applicable Cables 0.635mm pitch flat cable, AWG 30 (7/0.1) stranded wire. (e.g. FLEX-*2*, see Section E) Outline Socket Dimensions H E ±0.05 Strain Relief Row-A #1 Terminal A 10.30 2.54 1.27 Row-B #1 Terminal C E ±0.05 4.00 3.70 5.54 5.00 10.30 Cover 5.10 0.635 0 D +– 0.10 8.70 2.54 A Part Number No. of Leads A B C D E F G H NHS068T-000-BS* 68 41.91 51.50 63.88 49.30 46.13 47.10 49.20 57.91 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Sockets and Connectors