6030 POWER INDUCTORS High Reliability Power Inductors MS512PYA ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion ■ Passes vibration testing to 80 G and shock testing to 1000 G ■ Exceptionally low DCR; soft saturation Terminations Tin-lead (63/37) over copper. Core material Composite Weight 0.6 – 0.7 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 400/7″reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.12 mm pocket depth Part number1 MS512PYA181MSZ MS512PYA331MSZ MS512PYA561MSZ MS512PYA102MSZ MS512PYA122MSZ MS512PYA182MSZ MS512PYA222MSZ MS512PYA332MSZ Inductance2 ±20% (µH) 0.18 0.33 0.56 1.0 1.2 1.8 2.2 3.3 DCR (mOhms)3 typ max 1.59 1.75 2.30 2.53 3.01 3.31 5.62 6.18 6.82 7.50 9.57 10.52 12.70 13.97 19.92 20.81 SRF (MHz)4 min typ 113 141 71 89 49 61 40 50 34 43 27 34 24 30 21 26 Isat (A)5 39 30 29 23 22 18.2 15.9 12.2 Irms (A)6 20°C rise 40°C rise 18.0 24.0 15.0 18.8 12.0 16.5 9.8 13.5 9.0 12.0 7.6 10.5 5.3 7.5 4.5 6.0 1. When ordering, please specify testing code: Irms Testing MS512PYA332MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. Typical dc current at which the inductance drops 30% from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms testing was performed on a 0.060″ thick pcb with 4 oz. copper traces optimized to minimize additional temperature rise. Document MS800-1 Revised 09/17/12 ® © Coilcraft, Inc. 2012 Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 6030 POWER INDUCTORS MS512PYA Series 0.20 Inductance (µH) 0.30 0.25 0.18 µH 0.15 0.10 0.05 0 0 5 10 15 20 Current (A) 25 30 35 Inductance (µH) 0.6 0.5 0.4 0.33 µH 0.3 0.2 0.1 0 0 5 10 15 20 Current (A) 25 30 35 Inductance (µH) 0.6 0.56 µH 0.4 0.2 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 Current (A) 25 30 35 40 1.0 µH 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Current (A) 1.2 µH 0 2 4 6 Current (A) 1.6 1.2 1.8 µH 0.8 0.4 0 0 2 4 6 10 12 14 16 18 20 22 24 26 28 30 8 Current (A) 3.0 2.5 2.0 2.2 µH 1.5 1.0 0.5 0 0 2 4 6 8 10 12 14 16 18 20 12 14 16 18 20 Current (A) 5 4 3 3.3 µH 2 1 0 0 2 4 6 8 10 Current (A) Document MS800-2 Revised 09/17/12 ® © Coilcraft, Inc. 2012 10 12 14 16 18 20 22 24 26 28 30 8 2.4 2.0 40 0.8 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 40 Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) Inductance (µH) L vs Current 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 6030 POWER INDUCTORS MS512PYA Series L vs Frequency 0.250 ±0.008 6,36 ±0,2 XXX 0.258 ±0.008 6,56 ±0,2 Dash number Dash number -181 -331 -561 -102 -122 -182 -222 -332 0.122 max 3,1 A ±0.008 in ±0,20 mm (in / mm) 0.213 / 5.42 0.213 / 5.42 0.213 / 5.42 0.206 / 5.24 0.206 / 5.24 0.204 / 5.18 0.201 / 5.12 0.200 / 5.08 Suggested Recommended Land Pattern Land Pattern 0.159 4,04 0.049 ±0.002 1,25 ±0,05 Irms Derating B (in / mm) 0.224 / 5.69 0.224 / 5.69 0.224 / 5.69 0.213 / 5.42 0.213 / 5.42 0.210 / 5.33 0.206 / 5.24 0.204 / 5.18 A (see table) B (see table) 120 110 0.110 ±0.01 2,79 ±0,25 90 80 Dimensions are in 70 0.056 1,43 inches mm 60 50 40 25°C Percent of rated Irms 100 30 20 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document MS800-3 Revised 09/17/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.