ERC30-01--ERC30-02 High Efficiency Rectifier VOLTAGE RANGE: 100 --- 200 V CURRENT: 1.5 A Features DO - 15 Low cost Diffused junction Low leakage Low forward voltage drop High current capability Easily cleaned with Alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Mechanical Data Case:JEDEC DO--15,molded plastic Polarity: Color band denotes cathode Dimensions in millimeters Weight: 0.014 ounces,0.39 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. ERC30 - 01 ERC30 - 02 UNITS Maximum recurrent peak reverse voltage VRRM 100 200 V Maximum RMS voltage VRMS 70 140 V Maximum DC blocking voltage VDC 100 200 V Maximum average forw ard rectified current 9.5mm lead length, @TA=75 IF(AV) 1.5 A IFSM 60.0 A VF 0.92 V Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 1.5A Maximum reverse current @TA=25 IR at rated DC blocking voltage @TA=100 5.0 100.0 Ａ Maximum reverse recovery time (Note1) trr 100 ns Typical junction capacitance (Note2) CJ 50 pF Typical thermal resistance (Note3) RθJA 50 TJ - 55 ---- + 150 TSTG - 55 ---- + 150 Operating junction temperature range Storage temperature range /W NOTE: 1. Measured with I F=0.5A, I R=1A, I rr=0.25A. 2. Measured at 1.0MH Z and applied rev erse v oltage of 4.0V DC. 3. Thermal resistance f rom junction to ambient. ht t p : // Revision:20170701-P1 www.lgesemi .c o m mail:[email protected] ERC30-01--ERC30-02 High Efficiency Rectifier Ratings AND Charactieristic Curves FIG.1 --TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 N 1. t rr 10 N1. +0.5A D.U.T. (+) 0 PULSE GENERATOR (NOTE2) (+) 25VDC (approx) (-) OSCILLOSCOPE (NOTE1) 1 NONINDUCTIVE -0.25A (-) -1.0A 1cm NOTES:1.RISE TIME=7ns MAX.INPUT IMPEDANCE=1MΩ.22pF 2.RISE TIME=10ns MAX.SOURCE IMPEDANCE=50Ω. SET TIME BASE FOR 20/30 ns/cm FIG.3--TYPICAL JUNCTION CAPACITANCE 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.5 0 0 20 40 60 80 100 120 140 150 60 40 20 10 4 TJ=25 2 1 0.1 0.2 90 T J =25 8.3ms Single Half Sine-Wave AMPERES 70 60 50 40 30 20 10 0 50 100 150 200 250 NUMBER OF CYCLES AT 60Hz 2 4 10 20 40 100 10 TJ =25 Pulse Width=300 µS 1.0 0.1 0.04 0.01 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 INSTANTANEOUS FORWARD VOLTAGE,VOLTS PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG DO-15 3000/AMMO 30000 42X28X31 12.00 10.00 ht t p : // Revision:20170701-P1 1 FIG.5 -- TYPICAL FORWARD CHARACTERISTIC AMPERES 100 80 0.4 REVERSE VOLTAGE,VOLTS INSTANTANEOUS FORWARD CURRENT AMBIENT TEMPERATURE. FIG.4--PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT. 200 100 JUNCTION CAPACITANCE,pF 1.5 AMPERES AVERAGE FORWARD RECTIFIED CURRENT. FIG.2 --FORWARD DERATING CURVE www.lgesemi .c o m mail:[email protected]