E-Series Surface Mount Mixer 5 – 2500 MHz EMRS-25MH V4 Features SM - 1 Package LO Power +13 dBm Up to +9 dBm RF Low Profile Surface Mount Tape and reel packaging available 0.319 [8.11] 0.187 [4.75]MAX 0.025 [.64] 0.250 [6.35] • • • • • Description M/A-COM’s EMRS-25MH is a Low Cost, Broadband, high performance Double Balanced Mixer designed for use in high volume wireless applications. The device has been optimised by careful selection of the Schottky Diode and Balun Transformer for excellent performance. EMRS-25MH is available in an SM-1 surface mount package and reflows using standard soldering reflow profiles. Parts are packaged in tape & reel. 0.260 [6.60] 0.250 [6.35] 0.160 [4.06] 0.070 [1.78] 0.270 [6.87] 0.060 [1.52] 0.050 [1.27] 0.040 [1.02] 0.050 [1.27] 0.100 [2.54] Electrical Specifications: TA = 25°C, Z0 = 50Ω 1, LO = +13 dBm Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 5 - 2500 MHz — — — LO Frequency — 5 - 2500 MHz — — — IF Frequency — 5 - 1500 MHz — — — Conversion Loss — 10 - 1250 5 - 2500 dB dB — — 6.3 7.3 8.5 9.8 Isolation LO to RF 5 - 50 50 - 1250 1250 - 2500 dB dB 45 35 30 28 23 20 — — Isolation LO to IF 5 - 50 50 - 1250 1250 - 2500 dB dB dB 40 30 25 23 20 17 — — — Input 1 dB Compression — 5 - 2500 dBm — — 1 Ordering Information Part Number Package EMRS-25MHTR Tape and Reel (900 piece Reel) 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series Surface Mount Mixer 5 – 2500 MHz EMRS-25MH V4 Absolute Maximum Ratings 1 Pin Configuration Function Parameter Absolute Maximum 1 LO RF Power 150 mW 2 Ground Peak IF Current 40 mA 3 Ground Operating Temperature -55°C to +100°C 4 RF Storage Temperature -55°C to +125°C 5 IF Pin Temperature (10 seconds) +260°C 6 Ground Pin No. 1. Operation of this device above any one of these parameters may cause permanent damage. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.