SPECIFICATION • Samsung P/N : CL31C332FBFNNNE CAP, 3.3㎋ ㎋, 50V, ±1%, C0G, 1206 • Description : • Supplier : Samsung electro-mechanics • Product : Multi-layer Ceramic Capacitor A. Samsung Part Number ① Series ② Size ③ Dielectric ④ Capacitance ⑤ Capacitance tolerance ⑥ Rated Voltage ⑦ Thickness CL 31 C 332 F B F N N N E ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 ± 0.15 mm W: ⑧ Inner electrode Termination C0G 3.3 ㎋ ±1 % 50 V 1.25 ± 0.15 mm Plating ⑨ Product ⑩ Special ⑪ Packaging 1.6 ± 0.15 mm Ni Cu Sn 100% (Pb Free) Normal Reserved for future use Embossed Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance Test condition Within specified tolerance 1000 min 1㎑±10% 0.5~5Vrms 10,000Mohm or 500Mohm⋅㎌ Whichever is Smaller Rated Voltage 60~120 sec. Withstanding No abnormal exterior appearance No dielectric breakdown or Microscope (×10) 300% of the rated voltage Voltage Temperature mechanical breakdown C0G Characterisitcs Adhesive Strength (From -55℃ to 125℃, Capacitance change shoud be within ±30PPM/℃) No peeling shall be occur on the 500g⋅F, for 10±1 sec. terminal electrode Capacitance Q Insulation Resistance Appearance of Termination Bending Strength Solderability Resistance to Soldering heat Capacitance change : within ±5% or ±0.5㎊ whichever is larger More than 75% of terminal surface is to be soldered newly Capacitance change : within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. Bending to the limit (1mm) with 1.0mm/sec. SnAg3.0Cu0.5 solder 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Moisture Resistance Capacitance change : within ±7.5% or ±0.75㎊ whichever is larger 40±2℃, 90~95%RH, 500+12/-0hrs Q: 200 min Cycling 500Mohm or 25Mohm ⋅ ㎌ Whichever is Smaller Capacitance change : within ±3% or ±0.3㎊ whichever is larger Q: 350 min IR : Temperature Amplitude : 1.5mm within ±2.5% or ±0.25㎊ whichever is larger From 10㎐ to 55㎐ (return : 1min.) Tan δ, IR : initial spec. 2hours × 3 direction (x, y, z) Capacitance change : With rated voltage IR : High Temperature Resistance Test condition With 200% of the rated voltage Max. operating temperature 1000+48/-0hrs 1000Mohm or 50Mohm ⋅ ㎌ Whichever is Smaller Capacitance change : 1 cycle condition 25℃ within ±2.5% or ±0.25㎊ whichever is larger Min. operating temperature → Tan δ, IR : initial spec. → Max. operating temperature → 25℃ 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.