RCD CEA10-102-Z025 Axial lead ceramic capacitors multilayer ceragoldtm construction Datasheet

AXIAL LEAD CERAMIC CAPACITORS
MULTILAYER CERAGOLD TM CONSTRUCTION
CEA SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
Conformal coated, miniature sizes, 0.3pF - 2.2uF
Wide range of capacitance, tolerance, TC, and voltage
C0G (NP0), X7R, Z5U and Y5V temperature coefficients
Popular values available from stock
← L →←1.0 [25.4] min→
d
↓
↑
↓
D
RESISTORSCAPACITORSCOILSDELAY LINES
RCD’s CEA Series features CeragoldTM high-density multilayer construction enabling an expanded range of values.
Bodies are insulated with a proprietary flame retardant epoxy
coating for superior environmental protection and dielectric
strength. Non-standard values, increased voltage ratings,
custom marking, military screening, cut & formed leads, etc.,
are available. Matched sets and networks also available.
Custom components are an RCD specialty!
INCH [mm]
↑
SPECIFICATIONS
RCD
Type
CAPACITANCE RANGE
WVDC1
25
50
100
25
50
100
25
50
100
C E A 05
C E A 10
C E A 12
C0G (NPO)
X 7R
Z5U/Y5V
0.3 - 1000pF
0.3 - 1000pF
0.5 - 820pF
0.5 - 2700pF
0.5 - 2200pF
0.5 - 1000pF
0.5 - 5600pF
0.5 - 4700pF
0.5 - 3300pF
100pF - 0.15uF
100pF- 0.10uF
100pF- 0.01uF
100pF - 0.22uF
100pF- 0.10uF
100pF- 0.033uF
100pF - 1.0uF
100pF- 0.47uF
100pF- 0.10uF
2
1000pF - 1.0uF
1000pF - 0.47uF
1000pF- 0.068uF
1000pF - 1.2uF
1000pF - 1.0uF
1000pF- 0.10uF
1000pF - 2.2uF
1000pF - 1.0uF
1000pF- 0.10uF
L
D
(Body Length, Max) (Body Diameter, Max)
d
(Lead Dia)
0.150
[3.8]
.100
[2.54]
018 ±.003
[0.45 ±.08]
0.170
[4.32]
.100
[2.54]
.018 ±.003
[0.45 ±.08]
0.200
[5.1]
.118
[3.0]
.018 ± .003
[0.45 ± .08]
DIELECTRIC CHARACTERISTICS (typical)
ITEM
COG (NPO)
X 7R
Y5V (Z5U) 2
Cap. Range, E12 values
0.3 pF- 5,600 pF
100 pF - 1uF
1,000 pF - 2.2uF
Capacitance Tolerance
<10pF: ±.1pF, .25pF, .5pF (std)
≥10pF: ±1%, ±2%, ±5%(std), ±10%
±5%, ±10% (std),
±20%
±20% (std), +80/- 20%
Operating Temperature Range
-55°C to +125°C
-55°C to +125°C
-30°C to +85°C
Aging (cap loss/decade hr)
negligible
2%
+22%/-82% (+22%/-56%)
max over operating temp range
7%
Voltage Coef (∆C@ max V)
negligible
0.15% (+25°C & +125°C)
1.0VRMS, 1MHz for values<1000pF
100GΩ or 1000MΩ-uF
whichever is less
2.5x rated VDC
2x rated voltage @+125°C
∆C<3% or 0.25pF wig
-50% to+10% typ
-80% to+20% typ
2.5% Max., 1VRMS
4.0% Max. 0.5 VRMS
100GΩ or 1000MΩ-uF
whichever is less
2.5x rated VDC
2x rated voltage at +125°C
∆C<20%
10GΩ or 1000MΩ-uF
whichever is less
2.5x rated VDC
1.5x rated voltage at +85°C
∆C<30%
Temperature Characteristics
Dissipation Factor (1KHz)
Insulation Resistance 25°C
(MIL-STD-202-METHOD-302)
Dielectric Strength
Life Test (1000 hours)
0 ± 30ppm/°C
3
±15% max over op.temp range
Cut & Forming
P/N DESIGNATION:
Wide range of styles and sizes available... horizontal,
vertical mount, snap-in kinks, etc. Consult factory.
RCD Type
Option Code: (leave blank if standard)
Capacitance Code 2 significant digits & multiplier:
R50=0.5pF, 1R0=1pF, 100=10pF, 101=100pF, 102=1000pF,
103=.01uF (10,000pF), 104=.1uF(100,000pF), 105=1uF
Tolerance: F=1%, G=2%, J=5%, K=10%, M=20%,
Z=+80%/-20%, B=±0.1pF, C=±0.25pF, D=±0.5pF
Voltage Code: 025=25V, 050=50V, 101=100V, 201=200V
Dielectric: G=COG(NPO), R=X7R, V=Y5V (U=Z5U)
Packaging: B=Bulk, A=Ammo, T=Tape & Reel (5K pcs/reel typ)
Termination: W= Lead-free, Q= Tin/Lead
(leave blank if either is acceptable)
Footnotes:
1
Expanded range available, consult factory
2
Y5V is standard, Z5U is avail. (Y5V & Z5U are considered interchangeable)
3 ±60ppm <10pF
CEA10
- 102 - J 101 G T W
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA080A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
89
Similar pages