MURB1660CT Preferred Device SWITCHMODEt Power Rectifier D2PAK Power Surface Mount Package These state−of−the−art devices are designed for use in switching power supplies, inverters, and as free wheeling diodes. ULTRAFAST RECTIFIER 16 AMPERES, 600 VOLTS Features • • • • • • • • • • http://onsemi.com Package Designed for Power Surface Mount Applications Ultrafast 60 Nanosecond Recovery Times 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction High Voltage Capability to 600 V Low Leakage Specified @ 150°C Case Temperature Short Heat Sink Tab Manufactured − Not Sheared! Similar in Size to Industrial Standard TO−220 Package Pb−Free Packages are Available 1 4 3 D2PAK CASE 418B STYLE 3 4 1 3 Mechanical Characteristics: • Case: Epoxy, Molded, Epoxy Meets UL 94 V−0 • Weight: 1.7 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Device Meets MSL1 Requirements ESD Ratings: Machine Model, C >400 V Human Body Model, 3B >8000 V MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current (Rated VR, TC = 150°C) Total Device IF(AV) 8.0 16 A MARKING DIAGRAM AY WW U1660G AKA A Y WW U1660 G AKA = Assembly Location = Year = Work Week = Specific Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device MURB1660CT Package Shipping† D2PAK 50 Units/Rail Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 150°C) IFM 16 A MURB1660CTG D2PAK (Pb−Free) 50 Units/Rail Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 100 A MURB1660CTT4 D2PAK 800/Tape & Reel D2PAK (Pb−Free) 800/Tape & Reel Operating Junction and Storage Temperature Range MURB1660CTT4G TJ, Tstg −65 to +175 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. © Semiconductor Components Industries, LLC, 2006 July, 2006 − Rev. 7 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MURB1660CT/D MURB1660CT THERMAL CHARACTERISTICS (Per Leg) Symbol Value Unit Maximum Thermal Resistance, Junction−to−Case Rating RqJC 2.0 °C/W Maximum Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 50 °C/W TL 260 °C Symbol Max Unit Temperature for Soldering Purposes: 1/8″ from Case for 5 Seconds ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Maximum Instantaneous Forward Voltage (Note 2) (iF = 8.0 Amp, TC = 150°C) (iF = 8.0 Amp, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TC = 150°C) (Rated dc Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amp/ms) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) trr V 1.20 1.50 mA 500 10 ns 60 50 1. See Chapter 7 for mounting conditions. 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. 10 K 20 1.0 K 400 I R, REVERSE CURRENT (A) μ i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 50 TJ = 150°C 10 25°C 5.0 2.0 100°C 1.0 TJ = 150°C 10 100°C 2.0 1.0 0.4 25°C 0.1 0.04 0.3 0.1 100 40 0.01 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 100 200 vF, INSTANTANEOUS VOLTAGE (V) RATED VR APPLIED RqJC = 2°C/W 8.0 DC 7.0 6.0 5.0 4.0 SQUARE WAVE 3.0 2.0 1.0 0 140 150 500 600 Figure 2. Typical Reverse Current, Per Leg PF(AV), AVERAGE POWER DISSIPATION (WATTS) I F(AV), AVERAGE FORWARD CURRENT (AMPS) 10 400 VR, REVERSE VOLTAGE (V) Figure 1. Typical Forward Voltage, Per Leg 9.0 300 180 160 170 TC, CASE TEMPERATURE (°C) 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE DC TJ = 175°C 0 Figure 3. Current Derating, Case, Per Leg 1 2 3 4 5 6 7 8 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Power Dissipation, Per Leg http://onsemi.com 2 9 10 1.0 D = 0.5 0.5 0.2 P(pk) 0.1 0.1 0.05 0.01 0.05 ZqJC(t) = r(t) RqJC D curves apply for power pulse train shown read time at T1 t1 t2 Duty Cycle, D = t1/t2TJ(pk) − TC = P(pk) ZqJC(t) SINGLE PULSE 0.02 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 t, TIME (ms) Figure 5. Thermal Response 1K C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MURB1660CT 300 TJ = 25°C 100 30 10 1 10 VR, REVERSE VOLTAGE (V) Figure 6. Typical Capacitance, Per Leg http://onsemi.com 3 100 100 200 500 1K MURB1660CT PACKAGE DIMENSIONS D2PAK CASE 418B−04 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 DIM A B C D E F G H J K L M N P R S V A 1 2 S 3 −T− SEATING PLANE K W J G D 3 PL 0.13 (0.005) H M T B M MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE VARIABLE CONFIGURATION ZONE N R P U L M INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 L L M M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURB1660CT/D