ORing IGS-P9164GC-HV US Industrial iec 61850-3 20-port managed gigabit ethernet switch Datasheet

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
v1.0a Jul, 2015
IGS-P9164 Series
Features
Industrial IEC 61850-3 20-port managed Gigabit Ethernet
switch
Industrial
Ethernet Switch
IGS-P9164 Series
Industrial
Media Converter
Industrial
Device Server
▪ Designed for power substation / Railway application and fully compliant with
the requirement of IEC 61850-3 and IEEE 1613
▪ Support O-Ring (recovery time < 30ms over 250 units of connection) and
MSTP(RSTP/STP compatible) for Ethernet Redundancy
▪ Open-Ring support the other vendor's ring technology in open architecture
▪ O-Chain allow multiple redundant network rings
▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
▪ Support IEEE 1588v2 clock Synchronization
▪ Support IPV6 new internet protocol version
▪ Support Modbus TCP protocol
▪ Provided HTTPS/SSH protocol to enhance network security
▪ Support IEEE 802.3az Energy-Efficient Ethernet technology
▪ Support SMTP client and NTP server protocol
▪ Support IP-based bandwidth management
▪ Support application-based QoS management
▪ Support Device Binding security function
▪ Support DOS/DDOS auto prevention
▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
▪ Support ACL, TACACS+ and 802.1x User Authentication for security
▪ Support 9.6K Bytes Jumbo Frame
▪ Support DBU-01 backup unit to quickly backup/restore configuration
▪ Multiple notification for warning of unexpected event
▪ Support DBU-01 backup unit device to quickly backup/restore configuration
▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision)
configuration
▪ Support LLDP Protocol
▪ Rigid IP-30 housing design
▪ DIN-Rail and wall mounting enabled
Industrial Wireless
Access Point
Industrial Cellular
VPN Router
Industrial
M2M Gateway
Introduction
edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology.
*NOTE: This function is available by request only
D esign ed for R u gged E xcellence
Network
Management Software
▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r
Accessories
IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and
rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant
ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 618503 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC
series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With
completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible)
can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide
operating temperature from -40 oC to 75 oC. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based
interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
1-197
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
v1.0a Jul, 2015
▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant
ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary
technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements.
▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone
network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust
compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-
Industrial Ethernet Switch
1
effectiveness in one set of network redundancy topology.
▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to
overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol.
▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth
for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth.
▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according
to TCP/UDP port number.
▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network.
Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera,
NVR and controllers.
▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in
short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS
attack immediately and completely.
▪ IEEE 1588 Technology : The IEEE 1588 technology can fulfill precision time synchronization requirements for protection and control applications.
▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.
▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking
standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or
more.
PLC
IGS-7084GCP
Control Center
O-Ring
PLC IGS-7084GCP
SCADA
PLC
IGS-7084GCP
IP Camera
Control Center
IGS-7084GCP
PLC
SCADA
SCADA
IGPS-1041GTPA
Control Center
IDS-5042
Power Generation
IGS-P9164
IMG-111 IDS-5011-WG
Smart Metering
Transmission
Distribution
*NOTE: This function is available by request only
1-198
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
v1.0a Jul, 2015
Industrial
Ethernet Switch
Dimensions
Industrial
Media Converter
IGS-P9164GC
Industrial
Device Server
IGS-P9164GF
Industrial Wireless
Access Point
Industrial Cellular
VPN Router
IGS-P9164FX
(Unit=mm)
Open-Vision
Industrial
M2M Gateway
ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for
user to manage and monitor all of industrial Ethernet switches on the industrial network.
Accessories
Commander
Topology View
Network
Management Software
D esign ed for R u gged E xcellence
1-199
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
v1.0a Jul, 2015
Specifications
ORing Switch Model
IGS-P9164GF-MM IGS-P9164GFX-MM IGS-P9164GF-SS
IGS-P9164GFX-SS IGS-P9164GC
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX
Industrial Ethernet Switch
1
16
Gigabit Combo Port with 10/100/1000Base-T(X) and
100/1000Base-X SFP Port
Fiber Ports Number
Fiber Ports Standard
1000Base-SX
4
4
-
100Base-FX
1000Base-LX
100Base-FX
-
Fiber Mode
Multi-mode
Multi-mode
Single-mode
Single-mode
-
Fiber Diameter (µm)
62.5/125 µm
50/125 µm
62.5/125 µm
50/125 µm
9/125 µm
9/125 µm
-
SC
SC
SC
SC
-
Typical Distance (km)
0.55 km
2 km
10 km
30 km
-
Wavelength (nm)
850 nm
1310 nm
1310 nm
1310 nm
-
-4 dBm
-14 dBm
-3 dBm
-8 dBm
-
-9.5 dBm
-23.5 dBm
-9.5 dBm
-15 dBm
-
0 dBm
0 dBm
-3 dBm
0 dBm
-
-18 dBm
-31 dBm
-20 dBm
-34 dBm
8.5 dB
7.5 dB
10.5 dB
19 dB
Fiber Optical Connector
Fiber Ports Specifications
-
Max. Output Optical
Power (dBm)
Min. Output Optical
Power (dBm)
Max. Input Optical Power
(Saturation)
Min. Input Optical Power
(Sensitivity)
Link Budget (dB)
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
8K
Packet Buffer
4Mbits
Priority Queues
8
Processing
Store-and-Forward
Switching latency: 7 us
Switching bandwidth: 40Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Up to 9.6K Bytes
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Switch Properties
Jumbo frame
Security Features
1-200
w w w.oring - net wo rk in g.co m
-
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
LED Indicators
Green : Power LED x 3
Ring Master Indicator (R.M.)
1000Base-X Fiber Port Indicator
Green : Indicates that the system is operating in O-Ring Master mode
Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Amber : Indicate unexpected event occurred
Green for Link/Act indicator.
Dual color LED for speed indicator : Green for 1000Mbps indicator / Amber for 100Mbps indicator / Off light for 10Mbps
indicator
Green for port Link/Act.(for IGS-P9164GF series)
100Base-FX Fiber Port Indicator
Green for port Link/Act.(for IGS-P9164GFX series)
100/1000Base-X SFP Port Indicator
Green for port Link/Act. (for IGS-P9164GC series)
O-Ring Indicator (Ring)
Fault Indicator(Fault)
10/100/1000Base-T(X) RJ45 Port Indicato
Relay
Relay output to carry capacity of 1A at 24VDC on 3-pin terminal block
Power
Reverse Polarity Protection
Present
Power Consumption (Typ.)
LV : 17Watts
HV : 18Watts
Industrial
M2M Gateway
Overload Current Protection
LV model : Dual power inputs. 12~48VDC on 2-pin terminal block
HV model : Dual power inputs. 85~264VAC/88~373VDC on 3-pin terminal block
LV : 18Watts
LV : 21Watts
LV : 18Watts
LV : 21Watts
HV : 18.5Watts
HV : 20.7Watts
HV : 18.5Watts
HV : 19.3Watts
Present
Redundant Input Power
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch)
LV Model : 1780 g
LV Model : 1769 g
LV Model : 1780 g
HV Model : 2216 g
HV Model : 2205 g
HV Model : 2216 g
Weight (g)
LV Model : 1769 g
HV Model : 2205 g
Industrial Cellular
VPN Router
Fault contact
Industrial Wireless
Access Point
Power Indicator(PWR)
Industrial
Device Server
RS-232 Serial Console Port
Industrial
Media Converter
Network Redundancy
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server
O-Ring
Open-Ring
O-Chain
MRP*NOTE
Fast Recovery
MSTP (RSTP/STP compatible)
RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
Industrial
Ethernet Switch
Software Features
v1.0a Jul, 2015
LV Model : 1750 g
HV Model : 2186 G
Environmental
-40 to 85oC (-40 to 185oF)
Operating Temperature
-40 to 75oC (-40 to 167oF )
Operating Humidity
5% to 95% Non-condensing
Accessories
Storage Temperature
Regulatory approvals
IEC 61850-3, IEEE 1613
EMI
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EN61000-4-2 (ESD)
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EMS
*NOTE: This function is available by request only
D esign ed for R u gged E xcellence
Network
Management Software
Power Automation
1-201
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
LV:204,467
HV:300,460
5 years
MTBF
Warranty
Industrial Ethernet Switch
1
LV:236,923
HV:300,460
LV:224,681
HV:281,040
LV:196,356
HV:238,082
LV:299,365
HV:408,521
Ordering Information
I G S -P9 A A B CC -FF- G G
Code Definition
Option
10/100/1000Base-T(X) Additional Port
Port Number
Number
- 16: 16 ports
Model Name
Available
Model
1-202
v1.0a Jul, 2015
- 4: 4 ports
Additional Port Type
- GF: 1000Base-X optical fiber port
- FX: 100Base-FX optical fiber port
- GC: Gigabit combo port
Fiber Optical Mode
- MM: Multi-mode
- SS: Single-mode
Fiber Optical Connector
- SC: SC connector
Description
IGS-P9164FX-MM-SC-LV
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode,
2Km/1310nm, SC connector, low-voltage power inputs
IGS-P9164FX-SS-SC-LV
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode,
30Km/1310nm, SC connector, low-voltage power inputs
IGS-P9164FX-MM-SC-HV_US
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode,
2Km/1310nm, SC connector, high-voltage power inputs, US power cord
IGS-P9164FX-MM-SC-HV_UK
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode,
2Km/1310nm, SC connector, high-voltage power inputs, UK power cord
IGS-P9164FX-MM-SC-HV_EU
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode,
2Km/1310nm, SC connector, high-voltage power inputs, EU power cord
IGS-P9164FX-MM-SC-HV_JP
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode,
2Km/1310nm, SC connector, high-voltage power inputs, JP power cord
IGS-P9164FX-SS-SC-HV_US
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode,
30Km/1310nm, SC connector, high-voltage power inputs, US power cord
IGS-P9164FX-SS-SC-HV_UK
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode,
30Km/1310nm, SC connector, high-voltage power inputs, UK power cord
IGS-P9164FX-SS-SC-HV_EU
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode,
30Km/1310nm, SC connector, high-voltage power inputs, EU power cord
IGS-P9164FX-SS-SC-HV_JP
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode,
30Km/1310nm, SC connector, high-voltage power inputs, JP power cord
IGS-P9164GF-MM-SC-LV
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode,
550m/850nm, SC connector, low-voltage power inputs
IGS-P9164GF-SS-SC-LV
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode,
10Km/1310nm, SC connector, low-voltage power inputs
IGS-P9164GF-MM-SC-HV_US
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode,
550m/850nm, SC connector, high-voltage power inputs, US power cord
IGS-P9164GF-MM-SC-HV_UK
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode,
550m/850nm, SC connector, high-voltage power inputs, UK power cord
w w w.oring - net wo rk in g.co m
Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode,
550m/850nm, SC connector, high-voltage power inputs, EU power cord
IGS-P9164GF-MM-SC-HV_JP
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode,
550m/850nm, SC connector, high-voltage power inputs, JP power cord
IGS-P9164GF-SS-SC-HV_US
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode,
10Km/1310nm, SC connector, high-voltage power inputs, US power cord
IGS-P9164GF-SS-SC-HV_UK
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode,
10Km/1310nm, SC connector, high-voltage power inputs, UK power cord
IGS-P9164GF-SS-SC-HV_EU
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode,
10Km/1310nm, SC connector, high-voltage power inputs, EU power cord
IGS-P9164GF-SS-SC-HV_JP
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode,
10Km/1310nm, SC connector, high-voltage power inputs, JP power cord
IGS-P9164GC-LV
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, lowvoltage power inputs
IGS-P9164GC-HV_US
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, US power cord
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, UK power cord
IGS-P9164GC-HV_EU
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, EU power cord
IGS-P9164GC-HV_JP
Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, JP power cord
Optional Accessories (Can be purchased separately)
‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices
‧DR-120 series : 120 Watts DIN-Rail power supply
‧DR-45 series : 45 Watts DIN-Rail power supply
‧DR-75 series : 75 Watts DIN-Rail power supply
‧DBU-01 : backup unit device
Industrial Cellular
VPN Router
Packing List
‧IGS-P9164GF(X) or GC x 1
‧DIN-Rail Kit x 1
‧AC power cord (for HV only)
‧ORing Tool CD x 1
‧Wall-mount Kit x 2
‧Quick Installation Guide x 1
‧Console Cable x 1
Industrial Wireless
Access Point
IGS-P9164GC-HV_UK
Industrial
Device Server
IGS-P9164GF-MM-SC-HV_EU
Industrial
Media Converter
Available
Model
Description
Industrial
Ethernet Switch
Model Name
v1.0a Jul, 2015
Industrial
M2M Gateway
Accessories
Network
Management Software
D esign ed for R u gged E xcellence
1-203
Similar pages