AZSR126 26 AMP MINIATURE POWER RELAY FEATURES • Dielectric strength 4500Vrms • 31 Amp switching • Contact gap > 1.8mm • Clearance / creepage > 6.4 / 7.5mm • UL, CUR E44211 • VDE pending CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 8587VA Max. switched current: 31A Max. switched voltage: 277 VAC Rated Load UL VDE 26A 26A 22A 22A at at at at 277 250 277 250 VAC, VAC, VAC, VAC, resistive, resistive, resistive, resistive, 75°C, 75°C, 85°C, 85°C, 50k cycles 50k cycles 100k cycles 100k cycles 31A 31A 26A 26A 22A 22A at at at at at at 277 250 277 250 277 250 VAC, VAC, VAC, VAC, VAC, VAC, cos phi 0.8, 85°C, 50k cycles * cos phi 0.8, 85°C, 50k cycles * resistive, 85°C, 50k cycles resistive, 85°C, 50k cycles resistive, 85°C, 100k cycles resistive, 85°C, 100k cycles Life Expectancy Mechanical Electrical Minimum operations 2 x 105 5 x 104 at 26A 250 VAC Res. Operate Time 20ms max. at nominal coil voltage Release Time 10ms max. at nominal coil voltage Dielectric Strength (at sea level for 1 min.) 4500Vrms coil to contact 2500Vrms between open contacts Insulation Resistance 1000 megaohms min. at 20°C, 500 VDC 50% RH Holding Voltage Greater than 35% of nominal coil voltage Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating at nominal coil voltage -40°C (-40°F) to 60°C (140°F) at max. 80% of nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) Storage * duty factor: 0.1 seconds on / 10 seconds off Vibration 1.5mm DA at 10-55 Hz < 100 milliohms initially Shock 20 g (at 6V, 1A, voltage drop method) Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 260°C (500°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 25 grams Material Silver tin oxide Resistance COIL Power At Pickup Voltage (typical) 690mW Max. Continuous Dissipation 2.0W at 20°C (68°F) ambient Temperature Rise 90°C (194°F) at nominal coil voltage Temperature (with no coil suppression) Max. 155°C (311°F) NOTES 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 8/17/15 AZSR126 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC Min. Holding VDC Max. Continuous VDC Coil Resistance Ohm ± 10% ORDER NUMBER 9 6.3 3.2 10.8 58 AZSR126-1AE-9D 12 8.4 4.2 14.4 103 AZSR126-1AE-12D 18 12.6 6.3 21.6 230 AZSR126-1AE-18D 24 16.8 8.4 28.8 410 AZSR126-1AE-24D MECHANICAL DATA PC BOARD LAYOUT 2 x 0.8 2 x 1.5 27.6 ±0.1 2 x ø 1.8 +0.1 3.8 ±0.1 1.75 ±0.1 2 x 0.7 12.0 ±0.1 2 x 0.7 1.45 ±0.1 2 x ø 1.1 +0.1 15.9 30.4 22.0 ±0.1 Viewed toward terminals 23.3 WIRING DIAGRAM 4 x 3.5 ±0.5 3 4 1 2 Viewed toward terminals Tolerance: ± 0.3 mm 8/17/15