HDSM-541x/543x 0.56” (14.22mm) Dual digit surface mount LED display Data Sheet Description Features The HDSM-541x/543x is a dual digit display of 0.56” (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments. x 0.56” digit height x Low current operation x Excellent characters appearance x Available in CA and CC x 500 pieces per reel x Moisture sensitivity level: Level 3 x RoHS compliant Ordering Information Red Green Yellow Orange Description HDSM-541C HDSM-541H HDSM-541F HDSM-541L Common Anode, Right Hand Decimal HDSM-543C HDSM-543H HDSM-543F HDSM-543L Common Cathode, Right Hand Decimal Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance are 0.25 mm (0.01”) unless otherwise noted. Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 CATHODE G 1 ANODE G 2 CATHODE DP 2 ANODE DP 3 CATHODE A 3 ANODE A 4 CATHODE F 4 ANODE F 5 COMMON ANODE DIG2 5 COMMON CATHODE DIG2 6 CATHODE D 6 ANODE D 7 CATHODE E 7 ANODE E 8 CATHODE C 8 ANODE C 9 CATHODE B 9 ANODE B COMMON ANODE DIG1 10 COMMON CATHODE DIG 1 10 Internal Circuit Diagram (Common Cathode) Internal Circuit Diagram (Common Anode) A B 3 C 9 E D 8 6 A G DP F 7 DIG2 : 5 DIG1 : 10 4 1 B C D E F G DP A B 3 2 DIG1 10 C 9 E D 8 6 DIG2 5 7 A G DP F 4 1 B C D 2 Absolute Maximum Ratings @ TA=25° Parameter 2 Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C E F G DP Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 5.4 10.5 - mcd IF = 10mA Emissions Wavelength Op/Od - 572/571 - nm IF = 20mA Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 Reverse Current, Per Segment IR - Luminous Intensity Matching Ratio IV-M - Parameters Symbol Average Luminous Intensity IV Emissions Wavelength 2.6 V IF = 20mA 100 PA VR = 5V - 2:1 - IF = 10mA Min Typ Max Unit Test Condition 8.6 20 - mcd IF = 10mA Op/Od - 591/589 - nm IF = 20mA Spectral Line Half-Width 'O - 15 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 16.0 - mcd IF = 10mA Emissions Wavelength Op/Od - 632/624 - nm IF = 20mA Spectral Line Half-Width 'O - 20 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 19.5 - mcd IF = 10mA Emissions Wavelength Op/Od - 611/605 - nm IF = 20mA Yellow Red Orange 3 Spectral Line Half-Width 'O - 17 - nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - 2:1 - IF = 10mA - Typical Electrical / Optical characteristic curves @ TA=25°C Green G 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10MA) RELATIVE LUMINOUS INTENSITY 1.0 . 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 Figure 1. Relative Luminous Intensity vs. Wavelength 1 0 5 10 40 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 2 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 G G 30 20 10 20 10 0 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 4 3 0 700 G 90 100 110 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Yellow 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 400 450 500 550 WAVELENGTH(nm) 600 650 0 5 10 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 Figure 2. Relative Intensity vs. Forward Current 40 30 20 10 0 30 20 10 0 0 10 20 30 40 50 60 70 80 AMBIENT TEMPERATURE(°C) Figure 3. Allowable DC Current vs. Ambient Temperature 5 2 0 700 Figure 1. Relative Intensity vs. Wavelength 3 90 100 110 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Red R 4 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE LUMINOUS INTENSITY 1.0 0.5 0 400 500 550 WAVELENGTH(nm) 600 650 0 5 10 40 30 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 1 R 20 10 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 15 20 25 30 35 FORWARD CURRENT IF(mA) 40 45 50 Figure 2. Relative Luminous Intensity vs. Forward Current 40 6 2 700 Figure 1. Relative Luminous Intensity vs. Wavelength 0 3 0 450 R 90 100 110 R 30 20 10 0 1.2 1.6 2.0 2.4 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 2.8 3.2 Orange 4 RELATIVE INTENSITY (NORMALIZED TO 1 AT 10mA) RELATIVE INTENSITY 1.0 0.5 0 450 2 1 0 500 550 600 650 WAVELENGTH(nm) 700 0 750 Figure 1. Relative Intensity vs. Wavelength 5 10 15 20 25 30 FORWARD CURRENT IF(mA) 35 40 45 50 Figure 2. Relative Intensity vs. Forward Current 40 FORWARD CURRENT IF(mA) FORWARD CURRENT IF(mA) 40 30 20 10 0 0 10 20 30 40 50 60 70 AMBIENT TEMPERATURE(°C) 80 Figure 3. Allowable DC Current vs. Ambient Temperature 7 3 90 100 105 30 20 10 0 1.0 1.5 2.0 2.5 FORWARD VOLTAGE(V) Figure 4. Forward Current vs. Forward Voltage 3.0 3.5 Intensity Bin Limits (mcd) Yellow / Red / Orange Green IV Bin Category Min. Max IV Bin Category Min. Max M 5.401 8.600 N 8.601 13.700 N 8.601 13.700 P 13.701 21.800 P 13.701 21.800 Q 21.801 34.700 Q 21.801 34.700 R 34.701 55.200 Tolerance: ±15% Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Recommended soldering pattern (unit: mm) SMT Soldering Profile Pb free reflow soldering Profile 2 TEMPERATURE 10 - 30 SEC. 217°C 200°C 245°C 3°C/SEC. MAX. 6°C/SEC. MAX. 150°C 16 3°C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. 3 TIME (Acc. to J-STD-020C) Notes: 1. The peak temperature refers to the peak package body temperature. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process. 8 2.54 x 4 = 10.16 Recommended stencil window opening is 80% For product information and a complete list of distributors, please go to our web site: 4.0 + −0 0.1 .0 2.4 ± 0.1 Ø1 .5 4 ± 0.1 0.35 Ø2 20.2 ± 0.1 40.4 ± 0.1 44 +0.300 −0.100 1.75 ± 0.1 Tape specification (unit: mm) www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0983EN - March 17, 2011