6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 FEATURES The MOC810X and CNY17F-X devices consist of a gallium arsenide LED optically coupled to a silicon phototransistor in a dual-in-line package. • Closely Matched Current Transfer Ratio (CTR) Minimizes Unit-to-Unit Variation • Narrow (CTR) Windows that Translate to a Narrow and Predictable Open Loop Gain Window • Very Low Coupled Capacitance along with No Chip to Pin 6 Base Connection for Minimum Noise Susceptibility • To order devices that are tested and marked per VDE 0884 requirements, the suffix “.300” must be included at the end of part number. e.g. MOC8101.300 VDE 0884 is a test option. APPLICATIONS 6 6 1 1 6 1 • Switchmode Power Supplies (Feedback Control) • AC Line/Digital Logic Isolation • Interfacing and coupling systems of different potentials and impedances ABSOLUTE MAXIMUM RATINGS Parameter (TA =25°C Unless otherwise specified) Symbol Value Unit IF 100 mA INPUT LED Forward Current - Continuous Forward Current - Peak (PW = 1µs, 300pps) 1 IF(pk) 1 A Reverse Voltage VR 6 Volts LED Power Dissipation @ TA = 25°C PD 140 mW 1.33 mW/°C Derate above 25°C OUTPUT TRANSISTOR Collector-Emitter Voltage MOC8106/7/8, CNY17F-1/2/3/4 VCEO MOC8101/2/3/4/5 Emitter-Collector Voltage Detector Power Dissipation @ TA = 25°C SCHEMATIC 70 Volts NC 2 3 6 5 NC 4 PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. NO CONNECTION 30 VECO 7 Volts PD 200 mW 2.67 mW/°C 5300 Vac(rms) Derate above 25°C TOTAL DEVICE Input-Output Isolation Voltage(1) VISO (f = 60 Hz, t = 1 min.) Total Device Power Dissipation @ TA = 25°C PD Derate above 25°C 260 mW 2.94 mW/°C Ambient Operating Temperature Range TOPR -55 to +100 °C Storage Temperature Range TSTG -55 to +150 °C TSOL 260 °C Lead Soldering Temperature (1/16” from case, 10 sec. duration) NOTE 1. Input-Output Isolation Voltage,VISO, is an internal device dielectric breakdown rating. 2001 Fairchild Semiconductor Corporation DS300266 9/18/01 1 OF 10 www.fairchildsemi.com 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 ELECTRICAL CHARACTERISTICS MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 (TA =25°C Unless otherwise specified)(1) Characteristic Symbol Min Typ** Max Unit Forward Voltage (IF = 60 mA) VF 1.0 1.4 1.65 V Reverse Leakage Current (VR = 5.0 V) IR — 0.001 10 µA Capacitance C — 18 — pF (VCE = 10 V, TA = 25°C) ICEO1 — 1.0 50 nA (VCE = 10 V, TA = 100°C) ICEO2 — 1.0 — µA V(BR) CEO 30 100 — V 70 100 — V(BR) ECO 7.0 10 — V CCE — 8 — pF 50 — 80 INPUT LED OUTPUT TRANSISTOR Collector-Emitter Dark Current Collector-Emitter Breakdown Voltage MOC8101/2/3/4/5 (IC = 1.0 mA) MOC8106/7/8, CNY17F-1/2/3/4 (IC = 1.0 mA) Emitter-Collector Breakdown Voltage Collector-Emitter Capacitance (IE = 100 µA) (f = 1.0 MHz, VCE = 0) COUPLED MOC8101 Output Collector Current (IF = 10 mA, VCE = 10 V) MOC8102 73 — 117 MOC8103 108 — 173 MOC8104 160 — 256 MOC8105 65 — 133 50 — 150 MOC8107 100 — 300 MOC8108 250 — 600 CNY17F-1 40 — 80 CNY17F-2 63 — 125 CNY17F-3 100 — 200 CNY17F-4 160 — 320 VCE(sat) — — 0.4 V (f = 60 Hz, t = 1.0 min.)(4) VISO 5300 — — Vac(rms) (VI-O = 500 V)(4) RISO 1011 — — 1 MHz)(4) CISO — 0.5 — pF MOC8106 (IF = 10 mA, VCE = 5 V) (CTR)(2) % Collector-Emitter Saturation Voltage CNY17F-1/2/3/4 (IC = 2.5 mA, IF = 10 mA) MOC8101/2/3/4/5/6/7/8 (IC = 500 µA, IF = 5.0 mA) Isolation Voltage Isolation Resistance Isolation Capacitance (VI-O = 0, f = 1.0 ** All typicals at TA = 25°C www.fairchildsemi.com 2 OF 10 9/18/01 DS300266 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 TRANSFER CHARACTERISTICS AC Characteristic MOC8103 MOC8107 CNY17F-3 (TA =25°C Unless otherwise specified) Test Conditions NON-SATURATED SWITCHING TIME Turn-on Time CNY17F-1/2/3/4 Only (RL = 100 1, IC = 2 mA) Turn-off Time CNY17F-1/2/3/4 Only (VCC = 10 V) Turn-On Time All Devices (IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3) Turn-Off Time All Devices (IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3) Rise Time All Devices (IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3) Fall Time All Devices MOC8104 MOC8108 CNY17F-4 (IC = 2.0 mA, VCC = 10 V, RL = 100 1)(3) Symbol Min Typ** Max ton — 2 10 toff — 3 10 ton — 2 — Unit µs µs toff — 3 — tr — 1 — µs tf — 2 — — — 5.5 SATURATED SWITCHING TIMES Turn-on Time (IF = 20 mA, VCE = 0.4 V) CNY17F-1 ton CNY17F-2 CNY17F-3 µs (IF = 10 mA, VCE = 0.4 V) — — 8.0 (IF = 20 mA, VCE = 0.4 V) — — 4.0 CNY17F-4 Rise Time CNY17F-1 CNY17F-2 CNY17F-3 µs tr (IF = 10 mA, VCE = 0.4 V) — — 6.0 (IF = 20 mA, VCE = 0.4 V) — — 34 (IF = 10 mA, VCE = 0.4 V) — — 39 (IF = 20 mA, VCE = 0.4 V) — — 20 CNY17F-4 Turn-off Time CNY17F-1 CNY17F-2 CNY17F-3 µs toff CNY17F-4 Fall Time CNY17F-1 CNY17F-2 CNY17F-3 µs tf (IF = 10 mA, VCE = 0.4 V) — — 24 CNY17F-4 ** All typicals at TA = 25°C NOTES: 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. Current Transfer Ratio (CTR) = IC/IF x 100%. 3. For test circuit setup and waveforms, refer to Figure 7. 4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common. DS300266 9/18/01 3 OF 10 www.fairchildsemi.com 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 TYPICAL PERFORMANCE CURVES Fig. 1 LED Forward Voltage vs. Forward Current Fig. 2 Normalized CTR vs. Forward Current 1.8 1.4 TA = 25˚C VCE = 5.0 V Normalized to IF = 10 mA 1.2 1.6 1.0 NORMALIZED CTR VF - FORWARD VOLTAGE (V) 1.7 1.5 TA = 55˚C 1.4 1.3 1.2 0.8 0.6 0.4 TA = 25˚C 0.2 1.1 TA = 100˚C 1.0 0.0 1 10 100 0 IF - LED FORWARD CURRENT (mA) 5 10 15 20 IF - FORWARD CURRENT (mA) Fig. 3 Normalized CTR vs. Ambient Temperature Fig. 4 CTR vs. RBE (Saturated) 1.6 1.0 0.9 IF = 5 mA 0.8 NORMALIZED CTR NORMALIZED CTR 1.4 1.2 IF = 10 mA 1.0 IF = 20 mA 0.7 0.6 IF = 10 mA 0.5 0.4 0.8 0.3 IF = 20 mA 0.6 0.4 -75 IF = 5 mA 0.2 Normalized to IF = 10 mA TA = 25˚C TA = 25˚C VCE = 0.3 V Normalized to CTR @ RBE = Open 0.1 0.0 -50 -25 0 25 50 75 100 125 10 100 1000 o TA - AMBIENT TEMPERATURE (˚C) www.fairchildsemi.com RBE - BASE RESISTANCE (kΩ) 4 OF 10 9/18/01 DS300266 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 Fig. 6 Collector Emitter Saturation Voltage vs Collector Current VCE (sat) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 5 CTR vs. RBE (Unsaturated) 1.0 0.9 NORMALIZED CTR 0.8 IF = 20 mA 0.7 0.6 IF = 10 mA 0.5 0.4 IF = 5 mA 0.3 0.2 TA = 25˚C VCE = 5.0 V Normalized to CTR @ RBE = Open 0.1 0.0 10 100 1000 RBE - BASE RESISTANCE (kΩ) 100 10 1 IF = 2.5 mA 0.1 IF = 5 mA IF = 10 mA TA = 25˚C 0.001 0.01 0.1 1 10 IC - COLLECTOR CURRENT (mA) Fig. 8 Normalized toff vs. RBE 6.0 1.4 5.5 1.3 5.0 1.2 VCC = 10 V IC = 2 mA RL = 100 Ω Normalized to toff@ RBE = Open 1.1 4.5 1.0 4.0 NORMALIZED toff NORMALIZED ton IF = 20 mA 0.01 Fig. 7 Normalized ton vs. RBE 3.5 3.0 2.5 2.0 1.5 0.9 0.8 0.7 0.6 0.5 0.4 VCC = 10 V IC = 2 mA RL = 100 Ω Normalized to ton@ RBE = Open 1.0 0.5 0.3 0.2 0.1 0.0 10 100 1000 10 10000 9/18/01 100 1000 10000 RBE - BASE RESISTANCE (kΩ) RBE - BASE RESISTANCE (kΩ) DS300266 MOC8104 MOC8108 CNY17F-4 5 OF 10 www.fairchildsemi.com 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 Fig. 9 Switching Speed vs. Load Resistor Fig. 10 Dark current vs. Ambient Temperature. 1000 ICEO - COLLECTOR-EMITTER DARK CURRENT (µA) 1e+1 IF = 10 mA VCC = 10 V TA = 25˚C SWITCHING SPEED - (µs) MOC8104 MOC8108 CNY17F-4 100 Toff Tf 10 Ton 1 Tr 0.1 VCE = 10V 1e+0 1e-1 1e-2 1e-3 1e-4 1e-5 1e-6 0.1 1 10 100 0 R-LOAD RESISTOR (kΩ) www.fairchildsemi.com 25 50 75 100 125 TA - AMBIENT TEMPERATURE (˚C) 6 OF 10 9/18/01 DS300266 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 Figure 7. Switching Time Test Circuit and Waveforms TEST CIRCUIT WAVE FORMS VCC = 10V INPUT PULSE IF IC INPUT RL = 1001 10% OUTPUT OUTPUT PULSE 90% tr ton tf toff Adjust IF to produce IC = 2 mA DS300266 9/18/01 7 OF 10 www.fairchildsemi.com 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 Package Dimensions (Through Hole) MOC8104 MOC8108 CNY17F-4 Package Dimensions (Surface Mount) 0.350 (8.89) 0.330 (8.38) PIN 1 ID. 3 2 PIN 1 ID. 1 0.270 (6.86) 0.240 (6.10) SEATING PLANE 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 5 4 0.070 (1.78) 0.045 (1.14) 6 0.300 (7.62) TYP 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.135 (3.43) 0.200 (5.08) 0.165 (4.18) 0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0° to 15° 0.020 (0.51) MIN 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.300 (7.62) TYP 0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX Lead Coplanarity : 0.004 (0.10) MAX 0.100 (2.54) TYP Package Dimensions (0.4”Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.070 (1.78) 0.270 (6.86) 0.240 (6.10) 0.060 (1.52) SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.415 (10.54) 0.070 (1.78) 0.045 (1.14) 0.100 (2.54) 0.295 (7.49) 0.030 (0.76) 0.200 (5.08) 0.135 (3.43) 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.016 (0.40) 0.008 (0.20) 0° to 15° 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.400 (10.16) TYP NOTE All dimensions are in inches (millimeters) www.fairchildsemi.com 8 OF 10 9/18/01 DS300266 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8102 MOC8106 CNY17F-2 MOC8101 MOC8105 CNY17F-1 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 ORDERING INFORMATION Order Entry Identifier Option Description S .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel W .W 0.4” Lead Spacing 300 .300 VDE 0884 300W .300W VDE 0884, 0.4” Lead Spacing 3S .3S VDE 0884, Surface Mount 3SD .3SD VDE 0884, Surface Mount, Tape & Reel QT Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.85 ± 0.20 4.0 ± 0.1 0.30 ± 0.05 4.0 ± 0.1 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 13.2 ± 0.2 9.55 ± 0.20 0.1 MAX 10.30 ± 0.20 Ø1.6 ± 0.1 User Direction of Feed NOTE All dimensions are in inches (millimeters) DS300266 9/18/01 9 OF 10 www.fairchildsemi.com 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS (NO BASE CONNECTION) MOC8101 MOC8105 CNY17F-1 MOC8102 MOC8106 CNY17F-2 MOC8103 MOC8107 CNY17F-3 MOC8104 MOC8108 CNY17F-4 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 10 OF 10 9/18/01 DS300266