HER601G thru HER608G Glass Passivated High Efficient Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Case: Molded plastic R-6 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 0.074 ounce, 2.1 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbols H ER 601G H ER 602G H ER 603G H ER 604G H ER 605G H ER 606G H ER 607G H ER 608G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 600 800 1000 Volts Parameter Maximum RMS voltage VRMS 35 70 140 210 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 300 400 600 800 1000 Volts Maximum average forward rectified current .375" (9.5mm) lead length @TA=55oC IF(AV) 6.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 250.0 Amps Maximum instantaneous forward voltage @ 6.0A VF Maximum DC reverse current at rated DC blocking voltage @ TA=25oC @ TA=125oC 1.0 1.3 1.7 10.0 200 IR Volts uA uA Maximum reverse recovery time (Note 1) trr 50 75 nS Typical junction capacitance (Note 2) CJ 100 65 pF Operating junction temperature range TJ -55 to +150 o C TSTG -55 to +150 o C Storage temperature range Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 183 RATINGS AND CHARACTERISTIC CURVES 184