“Soft-PGS (Compressible Type)” PGS with low thermal resistance “Soft-PGS (Compressible Type)” PGS with low thermal resistance Type: EYGS Soft-PGS (Compressible Type) is a graphite sheet that is dedicated for use as a thermal interface material. The Soft-PGS (Compressible Type) has very high compressibility compared to standard PGS, which enables reducing the thermal resistance by following gap, warpage, and distortion of targets/substrates. Excellent heat resistance and reliability of the Soft-PGS help obtaining longer service life and higher performance of various components, such as power modules. The Soft-PGS (Compressible Type) is cost-saving, because it may allow you to reduce your existing processes. Unlike grease, there is no necessity for printing process , since it is a sheet-type product. There are no problems that are found in grease and phase change materials in the Soft-PGS, which makes it excellent TIM. Features ● Thermal resistance : 0.2K∙cm2/W (600 kPa) To draw a good thermal resistance from sheet, pressure the Soft-PGS. A close adherence would make the product fit into the uneven part and enhance the performance. ● Thermal conductivity : X-Y direction 400W/m∙K, Z direction (28W/m∙K) ● Compressibility : 40 % (600k Pa) ● High and long term reliability : operating temperature range –55 to 400 °C ● RoHs compliant After pressure Recommended applications For cooling/heat transfer of electronic devices that generates heat, such as power modules. ● Inverters and converters ● Car-mounted camera, motor control unit, automotive LED, luminous source of laser HUD, medical equipment ● Base station, Server Install in IGBT module IGBT module Soft-PGS Heatsink Explanation of Part Numbers ● Soft-PGS(EYGS✽✽✽✽ZL✽✽) 1 2 3 4 5 6 7 8 9 10 11 12 E Y G S 0 9 1 8 Z L X 2 Suffix Product Code PGS Graphite sheet S Style PGS only 0909 0918 1818 Dimension 90 mm × 90 mm 90 mm × 180 mm 180 mm × 180 mm Thickness of Soft-PGS ZL 200 μm ✽ Please contact us for custom-made products. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2017 “Soft-PGS (Compressible Type)” PGS with low thermal resistance Typical characteristics Items Test method Condition Data Thermal resistance (K·cm2/W) TIM Tester 600 kPa Compressibility (%) TIM Tester 600 kPa 40 X-Y 400 (300 to 600) Thickness (µm) 200 Thermal conductivity (W/m·K) Laser PIT 0.2 Z (28) Operating temperature range (°C) −55 to 400 Typical values, not guaranteed. Thermal resistance and compressibility 60 1.8 50 1.6 Compressibility (%) Thermal resistance (K∙cm2/W) 2.0 1.4 1.2 1.0 0.8 0.6 0.4 40 30 20 10 0.2 0 0 100 200 300 400 Pressure (kPa) 500 600 0 0 100 200 300 400 500 Pressure (kPa) 600 700 Lamination type/Composition example ● Soft-PGS (Compressible Type) standard form Sheet only Type S Type Process for IGBT mounting − b Front a Structure Side Operating Temperature Range Thickness: c Standard Part No. c −55 to 400 °C 200 μm 90 × 90 mm EYGS0909ZLX2 90 ×180 mm EYGS0918ZLX2 180 ×180 mm EYGS1818ZLX2 ✽ Part numbers listed above are all standard samples for your consideration. ✽✽ Contact us for custom-made samples. We can make samples in various forms and/or dimensions other than standard samples. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2017 “Soft-PGS (Compressible Type)” PGS with low thermal resistance ● PGS in IGBT forms Sheet only S Type Lamination Type Process for IGBT mounting b e a d Front Structure ✽ This shape is an example, please contact us for detailed shape of each part no. Side c Operating Temperature Range Thickness: c No. Standard Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 EYGS1431ZLAA EYGS0925ZLWA EYGS1419ZLWB EYGS0917ZLWC EYGS1316ZLAC EYGS1216ZLWD EYGS1116ZLMA EYGS1315ZLGA EYGS1314ZLWE EYGS1014ZLAD EYGS0714ZLAE EYGS0714ZLAF EYGS1113ZLMB EYGS1313ZLGB EYGS0713ZLAG EYGS0813ZLMD EYGS1212ZLGC EYGS0912ZLGD EYGS0612ZLWF EYGS0512ZLGE EYGS0811ZLGH EYGS0811ZLWG EYGS0611ZLWH EYGS0411ZLWJ EYGS0610ZLAH EYGS0410ZLAJ EYGS1010ZLME −55 to 400 °C 200 µm a : Lateral size (mm) 140 85 136 85 125 120 108.8 129.5 126 97.8 70 69 106 128 66 71 120 88 60 53 80 78 60 43 59.4 43 98 b : Longitudinal Hole Hole size diameter number (mm) (0mm) 308 12 6 246 14 6 186 8 7.5 168 10 6 163 8 6.1 160 8 6 158 8 6 150 8 7 136 6 7.5 138 4 6.8 138 4 5.7 136 4 7.2 132 4 5.7 128 4 6.7 126 4 5.7 123 2 4.7 120 4 5.7 120 4 5.7 120 4 5.7 118 2 5.7 113 4 5.7 108 4 6.7 106 4 6.7 105.5 2 5.7 104.4 4 6.7 102.8 2 5.7 98 4 6.7 d : Lateral hole pitch (mm) 126 73 124 73 110 110 92.75 118.5 114 86 57 57 95 110 50 Center 110 78 50 Center 70 62 48 Center 48 Center 87 e : Longitudinal hole pitch (mm) 290 234 171 156 150 150 144 137.5 124 127 128 124 121 110 116 116 110 110 110 106 103 93 93 93 93 93 87 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2017 “Soft-PGS (Compressible Type)” PGS with low thermal resistance No. Standard Part No. 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 EYGS0409ZLGJ EYGS0509ZLGK EYGS0309ZLMF EYGS0409ZLMG EYGS0309ZLAK EYGS0509ZLMH EYGS0508ZLMJ EYGS0608ZLMK EYGS0607ZLGL EYGS0507ZLML EYGS0407ZLAL EYGS0506ZLMM EYGS0404ZLMP EYGS1018ZLSA EYGS1516ZLSB EYGS1116ZLSC EYGS0715ZLSD EYGS0613ZLSE EYGS0612ZLSF EYGS0612ZLSG EYGS1012ZLSH EYGS0410ZLSJ EYGS0609ZLSK EYGS0606ZLSL EYGS0305ZLSM EYGS0204ZLSN EYGS0303ZLSP EYGS0911ZLDA EYGS1014ZLDB a : Lateral size (mm) 44 46 32 41 29.5 51 46.2 55 58 45.3 40 48 36 104.5 148 112 67 61 63.3 61.5 104.5 43 61.5 58 27 24 29 92 98 b : Longitudinal Hole Hole size diameter number (mm) (0mm) 93 2 6.7 92 2 6.7 92 2 6.7 88 2 5.7 89.5 2 6.6 86 2 4.7 83 2 4.7 78 2 4.5 69.7 4 5.7 66 2 4.7 65.5 1 7.7 55 1 4.5 38 1 4.5 182.5 8 7 158 8 5 158 8 5 153 4 5.6 127.5 4 5.6 124 4 5.6 124 4 5.6 121 4 6.7 103 2 5.7 91 4 5.6 61.5 2 5.6 51 1 4.6 36.5 1 4.6 32 1 4.5 109 4 6 138 4 6.7 d : Lateral hole pitch (mm) Center Center Center Center Center – – Center 50 – Center Center Center 93 137 101 57 50 50 50 93 Center 50 44 Center Center Center 78 86 e : Longitudinal hole pitch (mm) 80 80 80 80 80 80 77 40 62 60 Center Center Center 171 150 150 143 116 110 110 109.5 93 77 50 Center Center Center 93 127 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2017