FE-0720A SERIES The FE-720A series filters are the same as our standard 720A series filters except that the connector is a standard IEC outlet. The connector is located on the output of the filter and is intended to provide filtered power for accessories etc. This filter will provide excellent common mode and differential filtering. This filter carries the UL, CSA, and TUV safety approvals FILTERED OUTLET Operating Voltage: 115/250 V~ Operating Current: 6, 8, 10 amps Operating Freq: 50 / 60 Hz Operating Temp: -20 / 40o C Diel. Withstand (L-C): 1500 V~ (1.0 min) Diel. Withstand (L-L): 1500 Vdc (1.0 min) Leakage Current: 1.0 ma @ 250 V, 60 Hz Max. Residulal volt: 32 volts after 1.0 sec. Insertion Loss: Curve shown is for 10 A Order Part number: FE-0720A-6 for 6 amps FE-0720A-8 for 8 amps FE-0720A-10 for 10 amps USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884