DNK1101M Surface Mount Type/ High-output IRED for Automotive Features Package Product features 10.2 x 6.0 mm (h=5.5 mm) type, Water clear epoxy ・Outer Dimension 10.2 x 6.0 x 5.5mm ( L x W x H ) ・Big Lenz Type ・Wide operation temperature range. Storage Temperature : -40℃～120℃ Operating Temperature : -30℃～ 95℃ ・High Total Output Power : 22mW TYP. (IF=50mA) ・Operation at 50mA is possible at 85℃. ・Lead–free soldering compatible ・RoHS compliant Peak Wavelength 870nm Half Intensity Angle θx = 38 deg., Die materials GaAlAs Rank grouping parameter Sorted by radiant intensity per rank taping Assembly method Auto pick & place machine (Auto Mounter) Soldering methods Reflow soldering ※Please refer to Soldering Conditions about soldering. Taping and reel 900pcs per reel in a 24mm width tape. (Standard) Reel diameter:φ330mm ESD 2kV (HBM) θy = 38 deg. Recommended Applications Automotive (Camera of Door Mirror, Camera of Crew Detection, Camera of Driver Watch, Rear Head Phone, Back Monitor, Various Sensors) 2009.11.30 Page 1 DNK1101M Surface Mount Type/ High-output IRED for Automotive Abs olute Maximum R atings (Ta=25℃) Ite m S ymbol Absolute Ma x imum Ra tings Unit P owe r Dissipa tion Pd 170 mW F orwa rd Curre nt T a =60℃ T a =95℃ P ulse F orwa rd Curre nt ※1 120 IF mA 40 IF R M 1,200 mA De ra ting (T a =60℃ or hig he r) ⊿ IF 2.29 mA/℃ ⊿ IF R M 22.90 mA/℃ Re ve rse Volta g e VR 5 V Ope ra ting Te mpe ra ture T opr -30～ +95 ℃ S tora g e T e mpe ra ture T s tg -40～ +120 ℃ ※ 1 IF R M Me a sure me nt condition : P ulse Width ≦ 100μ s, Duty ≦ 1/100 E lectro- Optical Characteris tics Ite m F orw a rd Volta g e Conditions IF =50mA (Ta=25℃) S ymbol VF Cha ra cte ristics MIN. 1.3 T YP . 1.5 MAX . 1.7 Unit V P ulse F orw ard Volta g e IF R M=500mA VF M MAX . 3.4 V Re ve rse Curre nt V R =5V IR MAX . 100 μA MIN. 20 T YP . 35 MAX . (60) Ra dia nt Inte nsity IF =50mA IE mW/sr T ota l Output P owe r IF =50mA Po T YP . 22 mW P e a k Wa ve le ng th IF =50mA λp T YP . 870 nm S pe ctra l Ha lf-width IF =50mA ⊿λ T YP . 45 nm Ha lf Inte nsity Ang le IF =50mA 2θ 1/2 T YP . Cut-off F re que ncy IF =50mA DC ±5mA, -3db from 1MHz fc Re sponse T ime IF =50mA tr/tf 2009.11.30 38(θ x ) 38(θ y) MIN. (40) T YP . 55 T YP . 7/7 de g . MHz ns Page 2 DNK1101M Surface Mount Type/ High-output IRED for Automotive Radiant Intensity Rank (Ta=25℃) IE（mW/s r） R ank Condition MIN. MAX . A 20 35 B 30 45 C 40 (60) IF = 50mA ※Please contact our sales staff concerning rank designation. 2009.11.30 Page 3 DNK1101M Surface Mount Type/ High-output IRED for Automotive Technical Data Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 50mA Relative Intensity Condition : Ta = 25℃ Wavelength [nm] Forward Voltage vs. Forward Current Pulse Forward Voltage vs. Pulse Forward Current Forward Current IF(mA) Forward Voltage : VF(V) 2009.11.30 Condition : Ta=25℃, tw≦100μs, Duty≦1/100 Pulse Forward Current IFRM(mA) Condition : Ta=25℃ Pulse Forward Voltage : VFM(V) Page 4 DNK1101M Surface Mount Type/ High-output IRED for Automotive Technical Data Ambient Temperature vs. Forward Current Derating Ambient Temperature vs. Maximum Forward Current Condition : tw≦100μs 150 Duty=1% 1200 1000 Forward Current : IF (mA) Maximum Forward Current : IFRM MAX. (mA) 1400 Duty=5% 800 600 Duty=10% 400 Duty=20% Duty=50% 200 DC -10 10 30 50 70 50 0 -30 0 -30 100 90 -10 10 30 50 70 90 Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Frequency Pulse Width vs. Maximum Forward Current Condition : Ta = 25℃, IF = 50mADC±5mA Condition : Ta ≦ 60℃ 1.20 Duty= Duty= Duty= Duty= Duty= Duty= Duty= Duty= 1.00 0.80 0.60 0.01 0.02 0.033 0.05 0.1 0.2 0.5 1 0.40 0.20 0.00 0.00001 0.001 0.1 Relative Radiant Intensity (dB) Maximum Forward Current : IFRM MAX. (A) 1.40 10 Pulse Width : Tw(s) Frequency (MHz) Duty= 2009.11.30 Tw T Tw T Page 5 DNK1101M Surface Mount Type/ High-output IRED for Automotive Technical Data Ambient Temperature vs. Forward Voltage Ambient Temperature vs. Pulse Forward Voltage Condition : IFRM = 500mA, tw≦100μs, Duty≦1/100 Forward Voltage VF(V) Pulse Forward Voltage VFM(V) Condition : IF = 50mA Ambient Temperature : Ta (℃) Ambient Temperature : Ta (℃) Ambient Temperature vs. Peak Wavelength Ambient Temperature vs. Relative Total Power Ambient Temperature : Ta(℃) 2009.11.30 Condition : IF = 50mA Relative Total Power Peak Wavelength λp (nm) Condition : IF = 50mA Ambient Temperature : Ta (℃) Page 6 DNK1101M Surface Mount Type/ High-output IRED for Automotive Technical Data Forward Current vs. Relative Total Power Pulse Forward Current vs. Relative Total Power Forward Current : IF (mA) 2009.11.30 Condition : tw≦100μs, Duty≦1/100, Ta = 25℃ Relative Total Power Relative Total Power Condition : Ta = 25℃ Pulse Forward Current : IFRM (mA) Page 7 DNK1101M Surface Mount Type/ High-output IRED for Automotive Package Dimensions (Unit: mm) Weight: (194)mg Recommended Soldering Pattern Taping Specification (Unit: mm) (Unit: mm) Quantity: 900pcs/ reel (standard) 2009.11.30 Page 8 DNK1101M Surface Mount Type/ High-output IRED for Automotive Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2009.11.30 350 ℃ 3 s 1 time (MAX.) (30 W Max.) (MAX.) (MAX.) Page 9 DNK1101M Surface Mount Type/ High-output IRED for Automotive Handling Note 1. Handling of the Products Mold resin on the backside of the products has adhesiveness. If dust or your hand is stuck to the backside, Please slowly remove the product from there. And if the backside is strongly pushed, it affects the characteristics and reliability. Please be careful in handling. 2. Dirt If dirt sticks to the surface of lens, it affects the radiant intensity. Please don't touch the lens with bare hands. If dirt affects function, please wipe the dirt off carefully not to cause scratches on the lens with lens paper or the like. And if flux is stuck to the lens, please wipe the flux off carefully with alcohol-based cleaner. 3. Dew When the temperature changes suddenly at high temperature and humidity, dew is generated. Because dew is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. Because color of lens changes into milky color by rapid cooling at the conditions of high temperature and humidity, please care. 4. Freezing When temperature is below ０℃, water of dew and the like freezes. Because freezing is likely to cause reduction in radiant intensity, failure to light up, deterioration of insulation and the like, please care. 5. Strength When mounting, assembling, cleaning the lens, storing the products and the like, please be careful not to apply mechanical stress and excessive vibration to products. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 6. Mechanical stress to terminals When storing products and soldering, please be careful not to apply mechanical stress and excessive vibration to terminals. They are likely to cause cracks, delamination and bending terminal. And they are likely to affect the characteristics and reliability badly. 7. Backside Dust is stuck to the backside easily on construction of this product. There is no problem on the characteristic even if dust is stuck to the backside. Please be careful not to wipe off forcibly and not to rub. 8. Moisture Absorption If you use soldering with the over-specified humidity conditions, it affects the characteristics and reliability. Please use with the specified conditions. 9. Discoloration This product might discolor by the heat of reflow and might change to yellowish. But there is no problem on the characteristic and reliability. 10. Application Please stop to use by the applications that the breakdown and the wrong operation might influence the life or the human body. 11. Other When there is a process of supersonic wave welding etc after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please use after affirming beforehand there is no problem. If this product is used excluding the content described to these specifications, we do not take any responsibility. If you use it excluding these ratings, please consult us beforehand. ★Safety of Near-Infrared Rays★ It is generally said that the near-infrared rays(870nm) used for this product is harmless to humans. But we can not say that direct rays to eyes are always safe as well as the visual light. Please pay attention when the product is used. 2009.11.30 Page 10 DNK1101M Surface Mount Type/ High-output IRED for Automotive Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) High Temp. Operating Life Low Temp. Operating Life EIAJ ED4701/100(101) EIAJ ED4701/100(101) Wet High Temp. Operating Life EIAJ ED4701/100(102) High Temp. Storage Life Low Temp. Storage Life EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) Resistance to Soldering Heat EIAJ ED4701/300(301) Electric Static Discharge (ESD) Vibration, Variable Frequency EIAJ ED4701/300(304) EIAJ ED4701/400(403) Shock EIAJ ED4701/400(404) Thermal Shock Testing Conditions Duration Failure Ta = 25℃, IF = 100mA 1,000 h 0/20 Ta = 25℃, IFRM = 1,000mA, (tw=100μs, Duty=1/100) 1,000 h 0/20 Ta = 95℃, IF = 40mA 1,000 h 0/20 Ta = -30℃, IF = 100mA 1,000 h 0/20 Ta = 85℃, 85%, IF = 50mA 1,000 h 0/20 Ta = -40℃ ～ 120℃ (each 15min.) 1,000 cycles 0/20 Ta = 120℃ 1,000 h 0/20 Ta = -40℃ 1,000 h 0/20 (Pretreatment) Individual standard (Reflow Soldering) Pre-heating 180℃ 120s →Operating Heating 260℃ 5s C = 100pF, R2 = 1.5KΩ, ±2,000V Twice 0/20 once each polarity 0/10 2 44.1m/s (4.5G), 20 ～ 500Hz, 20min, XYZ each direction 2 h 0/10 2 3 times 0/10 5000m/s (510G), 0.5ms, 6directions Failure Criteria Items Symbols Conditions Failure criteria Radiant Intensity IE IF Value of each product Radiant Intensity Testing Min. Value ＜ Initial Value x 0.5 Forward Voltage VF Reverse Current IR 2010.12.30 2009.11.30 IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V Testing Max. Value ＞ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Page 11 DNK1101M Surface Mount Type/ High-output IRED for Automotive Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2009.11.30 Page 12