WHITE HIGH FLUX LED HW331A Technical Datasheet This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform Features and unique illuminated appearance than with • High flux output and high luminance • Designed for high current operation other LED solutions. • Uniform color This package LEDs are designed for high • Low profile and low thermal resistance current operation and high flux output • Packaged in tubes for use with application. But the package’s design features automatic insertion equipment better thermal management characteristics than other LED solutions. Because of these advantages, this product have many Application applications. Such as automotive tail, stop and • Automotive exterior lighting turn signal lamps, and electronic signs etc. • Electronic signs and signals • Channel letter / lighting • Decorative lighting • Specialty Lighting -1- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Outline Dimensions Unit : mm CHAMFER 1.25 X 1.25 3 ± 0.2 7.62 ± 0.5 CATHODE ANODE 7.62 ± 0.5 5.08 ± 0.3 7.5 ± 0.5 1.5±0.2 0.5 0.4 ± 0.2 1.4 MAX 2.5 ± 0.5 4.4 1.1 5.0° 0.76 ± 0.1 5.08 ± 0.2 Notes : Protruded epoxy is 1.4mm maximum. -2- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Electro-Optical Characteristics ( Ta = 25ºC, IF=30mA ) Item Symbol Luminous Flux [1] Value Unit Min. Typ. Max. ФV[2] 2.6 4.0 - lm Luminous Intensity IV - 1600 - mcd Chromaticity Coordinate[3] X, y Forward Voltage[4] VF View Angle 2θ ½ 110 deg. Thermal Resistance RθJ-P 130 ºC /W Optical Efficiency ŋopt - 38 - lm/W Reverse Current (at VR = 5V) IR - - 5 µA x=0.31, y=0.31 - 3.4 4.0 V Absolute Maximum Ratings ( Ta = 25ºC ) Item Symbol Value Unit DC Forward Current IF 30 mA Forward Peak Pulse Current IFP [5] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temperature Topr -30 ~ 85 ºC Storage Temperature Tstg -40 ~ 100 ºC Solder Temperature TS 260ºC for 5second [6] ºC Notes : [1] SSC maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color Coordinates Measurement allowance is ± 0.01 [4] A tolerance of ±0.05V on forward voltage measurements [5] t ≤ 0.1ms, D = 1/10 [6] No closer than 1.5mm from the base of the stopper. -3- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Reliability Tests Item Condition Note Failures Life Test Ta = RT, IF = 30mA 1000hrs 0/22 High Temperature Operating Ta = 85ºC, IF = 10mA 1000hrs 0/22 Low Temperature Operating Ta = -30ºC, IF = 30mA 1000hrs 0/22 Thermal Shock Ta = -40ºC (15min) ~ 100º (15min) (Transfer time : 10sec, 1Cycle = 30min) 100 cycles 0/40 Resistance to soldering Heat Ts = 255 ± 5ºC, t = 4 ± 1sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5kΩ ; 100pF 1 time 0/22 High Temperature Storage Ta = 100ºC 1000hrs 0/22 Low Temperature Storage Ta = -40ºC 1000hrs 0/22 Temperature Humidity Storage Ta = 85ºC, RH = 85% 1000hrs 0/22 Temperature Humidity Operating Ta = 85ºC, RH = 85%, IF = 10mA 500hrs 0/22 < Judging Criteria For Reliability Tests > VF USL[1] X 1.2 IR USL X 2.0 ФV LSL [2] X 0.7 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. -4- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Characteristic Diagrams Ta= 25ºC Ta= 25ºC 3.0 Relative Luminous Flux Forward Current(mA) 100 10 2.5 2.0 1.5 1.0 0.5 1 0.0 2.4 2.8 3.2 3.6 4.0 4.4 0 20 Forward Voltage [V] Forward Voltage vs. Forward Current 60 80 100 Forward Current vs. Relative Flux 40 Ta= 25ºC 0.33 0.32 100mA 30 50mA 30mA 20mA 0.31 10mA y Forward Current IF [mA] 40 Forward Current [mA] 20 O 1mA 0.30 RthJ-A = 300 C /W 10 0.29 0 -40 -20 0 20 40 60 80 0.28 0.28 100 O 0.29 0.30 0.31 0.32 0.33 x Ambient Temperature TA [ C] Ambient Temperature vs. Maximum Forward Current Forward Current vs. Chromaticity Coordinate -5- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A IF= 30mA 1.2 IF= 30mA 3.6 Forward Voltage [V] Relative Luminousity Flux 1.0 0.8 0.6 0.4 0.2 0.0 0 20 40 60 80 3.4 3.2 3.0 2.8 100 0 20 o 100 Ambient Temperature vs. Forward Voltage Ta= 25ºC, IF= 30mA 1.0 80 Ambient Temperature Ta[ C] Ambient Temperature vs. Relative Flux Ta= 25ºC, IF= 30mA 1.0 Relative Luminous Intensity Relative Emission Intensity 60 o Ambient Temperature Ta[ C] 0.5 0.0 400 40 500 600 0.8 0.6 0.4 0.2 0.0 -90 700 Wavelength [nm] -60 -30 0 30 60 90 Off Axis Angle [deg.] Spectrum Directivity -6- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Color Ranks 0.40 4600K 0.38 5600K d 0.36 CIE(y) 0.34 0.32 9000K 0.30 0.28 a 15000K 0.26 an Pl 0.24 0.22 0.24 b1 c1 b2 c2 n kia 0.26 e lin 0.28 0.30 0.32 0.34 0.36 0.38 CIE(x) Rank a Rank b1 x 0.264 0.280 0.296 0.283 x 0.283 0.304 0.307 0.287 y 0.267 0.248 0.276 0.305 y 0.305 0.329 0.315 0.296 Rank b2 Rank c1 x 0.304 0.330 0.330 0.307 x 0.287 0.307 0.311 0.296 y 0.329 0.360 0.339 0.315 y 0.296 0.315 0.294 0.276 Rank c2 Rank d x 0.307 0.330 0.330 0.311 x 0.330 0.330 0.356 0.361 y 0.315 0.339 0.318 0.294 y 0.360 0.318 0.351 0.385 Note : Color Coordinates Measurement allowance is ± 0.01 -7- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Bin Code Description Bin Code Luminous Flux CIE Forward Voltage G c1 4 Luminous Flux (lm) @ IF = 30mA Color Rank @ IF = 30mA Forward Voltage (V) @ IF = 30mA Bin Code Min. Max. 1 2.8 3.0 2 3.0 3.2 3 3.2 3.4 4 3.4 3.6 2.6 5 3.6 3.8 2.6 3.4 6 3.8 4.0 G 3.4 4.4 7 4.0 4.2 H 4.4 5.8 8 4.2 4.4 J 5.8 7.6 9 4.4 4.6 K 7.6 10.0 L 10.0 13.0 Bin Code Min. Max. A 0.5 0.7 B 0.7 1.0 C 1.0 1.4 D 1.4 2.0 E 2.0 F a b1 b2 c1 c2 d Available ranks -8- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Packing Unit : mm 9.72 5.8 13 0.6 3.2 5.1 2.6 485±1 SEOUL SEMICONDUCTOR CO., LTD. HXXXX 60pcs BINOOO * Plastic tube 60pcs max/tube HXXXX QTY : 1800pcs 1800pcs max/pack (30tubes max/pack) * Aluminum Sealing pack (in silica gel) LOT : 200X.XX.XX RANK XXX OOO SEOUL SEMICONDUCTOR CO., LTD 21600pcs/box (12packs/box) * Cardboard box (500x220x280) (21600pcs max/box) (12packs max/box) -9- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Soldering Profile 1) Recommended Wave Soldering Conditions / Profile • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max). • Soldering heat to be at 255 ºC (260ºC max) for 4 seconds (5 seconds max.) • Soak time above 200 ºC is 5 seconds 300 PEAK 250 255 ºC (260 ºC max) 200 O Temperature [ C] 4s (5s max) 150 PREHEAT 20s (60s Max) 100 85 ºC(120 ºC max) 50 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 T im e [s ] 2) Hand Soldering conditions • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution • Leadframes are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat) • No closer than 1.5mm from the base of the stopper. • The LEDs must not be repositioned after soldering. • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products. -10- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A Precaution for Use 1) Storage • Before opening the package a. Avoid the absorption of moisture, we recommended to store High Flux LEDs in a dry box(or desiccator) with a desiccant . Otherwise, store them in the following environment: Temperature : 5℃~30℃ Humidity : 50% max. b. The products should be used in 3 months. It is recommended that the LEDs be used as soon as possible. • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, components should be dried for 10-12hr at 60±5℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Avoid quick cooling • Leadframes are silver plated copper alloy. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Static Electricity • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. • All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. -11- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00) WHITE HIGH FLUX LED HW331A 3) Heat Generation • Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. • The operating current should be decided after considering the ambient maximum temperature of LEDs. 4) Others • The color of the LEDs is changed a little by an operating current and thermal. • Anti radioactive ray design is not considered for the products listed here in. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 • The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-858-5537 Homepage : www.seoulsemicon.com www.zled.com E-Store : www.zledstore.com E-mail : [email protected] -12- <070223> Rev. 0.0 서식번호 : QP-7-03-05 (Rev.00)