MTRONPTI LF9361 Specification for a transmit lc filter Datasheet

Specification for a Transmit LC Filter
MtronPTI P/N: LF9361
I. General & Electrical Requirements:
Lowpass Cutoff Frequency (@ 1dB maximum): 786MHz
Notch Filter @ 1.25dB: @ 596MHz & @ 626MHz
Rejection
Notch Filter:
608MHz to 614MHz: 14dB minimum
Lowpass Filter:
940MHz to 960MHz: 40dB minimum
960MHz to 1572MHz: 22dB minimum
1572MHz to 3000MHz: 7dB minimum
RF Power: ≤ 2-watts
ZS: 50Ω nominal
ZL: 75Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -30°C to +75°C
Storage: -45°C to +90°C
2. Package: SMD (ref. Drawing)
3. Automated Assembly Process Compatible
- Pick & Place
- Reflow Soldering
- Post Reflow Aqueous/Non-aqueous Wash
Figure 2: Recommended PAD Layout Drawing
Figure 1: SMD Package Outline Drawing
Figure 3: Maximum Reflow Solder profile
Rev. F 09/18/12
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence.
Information may not be copied or divulged without written permission from MtronPTI.
Specification for a Transmit LC Filter
MtronPTI P/N: LF9361
III. Design Simulation Plots:
Rev. F 09/18/12
Page 2 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence.
Information may not be copied or divulged without written permission from MtronPTI.
Similar pages