J118 RoHS Compliant 15.5 x 12.2 x 13.8 mm E197852 Features eatures • • • • Low coil power consumption Small size and light weight PC board mounting Wide range of applications Contact Data* Contact Arrangement Contact Rating 1A = SPST N.O. Contact Resistance < 50 milliohms initial 1B = SPST N.C. Contact Material AgSnO2 1C = SPDT Maximum Switching Power 280W, 1200VA Maximum Switching Voltage 380VAC, 110VDC Maximum Switching Current 20A N.O. 10A @ 120VAC Resistive 20A @ 14VDC Resistive N.C. 10A @ 14VDC Resistive 1/2hp - 125VAC; TV-5, 120VAC Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) Rated Max .6W .8W 75% of rated voltage 10% of rated voltage 9 11.7 135 102 6.75 .9 12 15.6 240 180 9.00 1.2 24 31.2 960 720 18.00 2.4 Coil Power W Operate Time ms Release Time ms .60 .80 10 5 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 500V rms min. @ sea level initial Contact to Contact 500V rms min. @ sea level initial Shock Resistance 100m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 10N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 6g * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. www.citrelay.com page 1 phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J118 Ordering Information 1. Series J118 1C S 12VDC .60 J118 2. Contact Arrangement 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 3. Sealing Option S = Sealed 4. Coil Voltage 9VDC 12VDC 24VDC 5. Coil Power .60 = .60W .80 = .80W Dimensions Units = mm 15.50 12.20 13.80 3.60 1.70 5 - 0.80 x 0.30 Schematics & PC Layouts Bottom Views 5.00 5 - Ø1.40 5.00 1A page 2 1B www.citrelay.com 10.20 1C phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. 2.50 fax - 763.535.2194 Specifications and availability subject to change without notice.