Kemet ERP610VH4220M Ceramic ac capacitor Datasheet

ERP610
• Ceramic AC Capacitors
• Class X1, 760V AC/Class Y1, 500VAC
TYPICAL APPLICATIONS
For worldwide use as electromagnetic
interference suppressor in all X1 and Y1
applications.
CONSTRUCTION
Disc capacitors with epoxy coating.
Epoxy dipped, insulating, flame retarding
according to UL 94V-0.
TECHNICAL DATA
Rated voltage UR
(IEC 60384-14.2)
X1
760 VAC, 50 Hz
Y1
500 VAC, 50 Hz
Capacitance range
33-4700 pF
Capacitance tolerance
± 10%, ± 20%
Temperature range
(-40 to +125)°C
Climatic category
IEC 40/125/21
Approvals
VDE, UL, CSA
Dissipation factor tanδ
≤ 25 • 10 -3
Test voltage between
terminals
Component test:
4000 VAC, 50 Hz, 2 s
As repeated test admissible only once with
3600 VAC, 50 Hz, 2 s
Random sampling test (destructive test):
4000 VAC, 50 Hz, 60 s
Dielectric strength of
body insulation
4000 VAC, 50 Hz, 60 s (destructive test)
Insulation resistance
≥ 10 • 10 9 Ω
Taping and special lead
configurations
On request
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
ERP610
ARTICLE TABLE
Capacitance
pF
Dimensions
D x s Max
(mm)
33
47
68
100
150
220
330
470
680
1000
1500
2200
2700
3300
3900
4700
8.0 x 6.0
8.0 x 6.0
8.0 x 6.0
8.0 x 6.0
8.0 x 6.0
8.0 x 6.0
8.0 x 6.0
8.0 x 5.0
8.0 x 5.0
9.0 x 5.0
10.0 x 5.0
12.0 x 5.0
13.0 x 5.0
15.0 x 5.0
15.0 x 5.0
17.0 x 5.0
p±1*
(mm)
d±0.05*
(mm)
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
V±0.5*
(mm)
Article code
1 st block
1.9
2.3
2.3
2.3
2.3
2.3
2.5
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
2.1
Ceramic
dielectric
ERP610VH2330M
ERP610VH2470M
ERP610VH2680M
ERP610VH3100M
ERP610VH3150M
ERP610VH3220M
ERP610VH3330M
ERP610VH3470M
ERP610VH3680M
ERP610VH4100M
ERP610VH4150M
ERP610VH4220M
ERP610VH4270M
ERP610VH4330M
ERP610VH4390M
ERP610VH4470M
N 750
K 1200
K 1200
K 1500
K 2000
K 2000
K 2000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
K 4000
* Standard lead configuration, other lead spacing and diameter available on request.
MARKING
APPROVALS/REFERENCE DOCUMENTS
Certification Body
Specification
Approval reference
VDE
UL
EN 132400
UL 1414 (UR = 250 VAC)
40001993, 40001996
E73869
CSA
(cUL recognition)
C 22.2 No. 1-M90 (UR=250 VAC)
216038
2.2 nF to 4.7 nF
33 pF to 1.5 nF
IEC 384-14/2
760 500 250~
X1 Y1 c � us
ERP 2n2 M
ERP
760~X1
500~Y1
33p M
All approval marks are also shown on the
label.
ORDERING INFORMATION
Article code
1st block
2nd block
See article table
Pos. 13 Capacitance tolerance code:
M = ± 20% standard
K = ± 10% option
See separate brochure:
Ceramic Disc, EMI and Safety Capacitors,
General information
Page 5
See article table and page 19 in the Evox Rifa Film Capacitors 2003 catalogue. For
options, see Ceramic Disc, EMI and Safety Capacitors, General information, Page 5.
PACKING
The box dimensions for bulk packaging
are 245 x 145 x 80 mm. Quantity/package
as per article table.
Reels with taped capacitors are packed
10 in a box with dimension 370 x 370 x
560 mm. Quantity/reel according to article
table. The standard quantity/reel is for
360 mm reel. If 500 mm reel is required,
it must be specified when ordering and
the quantity is 2 x the given quantity.
DATA SHEET ERP610
Specifications subject to change
without notice
© KEMET
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Similar pages