ILSE series External Mount Hydrostatic Level Transmitter Piezo-resistive sensor Accuracy <±0.25% FS BFSL Various outputs including Volts and mA. Level ranges from 1mWG to 10 mWG The external mount hydrostatic level transmitter, ILSE, has a piezo-resistive silicon pressure sensor which is an oilfilled isolated diaphragm. The sensor and housing are made from stainless steel with a choice of internal O ring seals to ensure the product is suitable for a wide range of applications. The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially in high vibration/shock applications. Every device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Material Specifications Housing “O” ring seals Diaphragm Media wetted parts Miscellaneous Current consumption Weight Installation position Operational Life Insulation resistance Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] Input Pressure Ranges Nominal level, Gauge, mWG 1 2.5 5 7 10 Permissible Overpressure mWG 20 20 20 50 50 Suitable applications Environmental engineering Rainwater harvesting Static tank level Laboratory testing Container or chamber level Automotive testing Vehicle tank level IBC, IBC Tote or pallet tank Performance Accuracy (Non-Linearity & Hysteresis) Setting Errors (offsets) 2-wire 3-wire Permissible Load 2-wire 3-wire Influence Effects Supply Load 303 Stainless Steel Viton 316L Stainless Steel Housing & process connection, “O” ring seal, diaphragm 2 -wire - limits at 28mA 3-wire - typical 6mA Approx 100g Any, small zero shift when tilted through 90º > 100 x 106 cycles > 50MOhms at 50Vdc ISO9001 C E R T I F I E D <±0.25% / FS (BFSL) Zero & Full Scale, <±0.5% / FS Zero & Full Scale, <±0.5% / FS Rmax = [(VS-VSmin)/0.02]W Rmin = 10kW <0.005% FS / 1V 0.05% FSO / kW Electrical Protection Supply reverse polarity Electromagnetic compatibility Mechanical Stability Shock Vibration Temperatures & Thermal Effects Media Temperature Ambient Temperature Storage temperature Compensated temperature range Thermal Zero Shift (TZS) Thermal Span Shift (TSS) No damage but also no function CE Compliant 100g / 11s 10g RMS (20 - 2000Hz) -40ºC to +125ºC -20ºC to +80ºC -40ºC to +125ºC +20ºC to +80ºC <±0.04% /FS/ºC <-0.015% /ºC www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ILSE series External Mount Hydrostatic Level Transmitter Output Signal and Supply Voltage Wire system Output 2-wire 4-20mA 3-wire Supply Volts 9-32Vdc 0.5 - 4.5Vdc (non-ratiometric) 9-32 Vdc Part No ILSE-G0100-5 ILSE-G0250-5 ILSE-G0500-5 ILSE-G0700-5 ILSE-G1000-5 ILSE-G0100-D ILSE-G0250-D ILSE-G0500-D ILSE-G0700-D ILSE-G1000-D Connection +ve Supply -ve Supply Ground Pin No. (Large plug and socket) Pin 1 Pin 2 Earth pin +ve Supply -ve Supply +ve Output Ground Pin 1 Pin 2 Pin 3 Earth Pin Pressure Range 0 - 1mWG 0 - 2.5mWG 0 - 5mWG 0 - 7mWG 0 - 10mWG 0 - 1mWG 0 - 2.5mWG 0 - 5mWG 0 - 7mWG 0 - 10mWG Output 4-20mA 4-20mA 4-20mA 4-20mA 4-20mA 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire 0.5 to 4.5V 3Wire Ip65 1/4” BSP Male ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.