SMD Aluminum Electrolytic Capacitor – JCD FEATURES Ø Low impedance with temperature range -55 ~ +105℃. Ø Load life of 1000 ~ 2000 hours. Ø Comply with the RoHS directive. SPECIFICATIONS Operating Temperature Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55℃ ~ +105℃ 6.3V ~ 50V.DC 1 ~ 4700μF ±20% at 120Hz, 20℃ Leakage current (Φ4~Φ10) ≤0.01CV or 3μA, whichever is greater (After 2 minutes application of rated voltage) Leakage current (Φ12.5~Φ16) ≤0.03CV or 4μA, whichever is greater (After 1 minutes application of rated voltage) Dissipation Factor (Tan δ) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 6.3 10 16 25 Φ4~Φ10 0.22 0.19 0.16 0.14 Tan δ (Max.) Φ12.5~Φ16 0.26 0.22 0.18 0.16 Stability At Low Temp. Measurement Frequency: 120Hz Rated Voltage (V) Impedance Ratio ZT/Z20 (Max.) Φ4~Φ10 Φ12.5~Φ 16 Z(-25℃)/ Z(20℃) Z(-55℃)/ Z(20℃) Z(-25℃)/ Z(20℃) Z(-55℃)/ Z(20℃) 35 0.12 0.14 50 0.12 0.12 6.3 10 16 25 35 50 2 2 2 2 2 2 5 4 4 3 3 3 3 3 2 2 2 2 10 8 6 4 3 3 Load Life After 2000 hours. ( 1000 hours for Ø4~ Ø6.3*5.4)application of rated voltage at 105℃. They meet the characteristics listed at right. Capacitance Change Within ± 20% of initial value. Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 105℃ for 1000 hours. They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed at right. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ6.3*7.7 *3 Applicable toΦ8*10.5~Φ10 *4 Applicable toΦ12.5~Φ16 Please visit our website to get more update data, those data & specification are subject to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCD DIMENSIONS (Unit: mm) ØDxL A B C E±0.2 L 4x5.4 2.0 4.3 4.3 1.0 5.4 5x5.4 2.2 5.3 5.3 1.4 5.4 6.3x5.4/7.7 2.6 6.6 6.6 1.9 5.4/7.7 8x6.2 3.4 8.4 8.4 2.3 6.2 8x10.5 3.0 8.4 8.4 3.1 10.5 10x10.5/13.5 3.3 10.4 10.4 4.7 10.5/13.5 12.5x13.5/16 4.9 13.0 13.0 4.7 13.5/16 16x16.5 5.8 17.0 17.0 6.4 16.5 DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE WV/V Cap/μF 10 100 15 150 22 220 33 330 47 470 68 680 100 101 150 151 220 221 330 331 4×5.4 6.3 10 16 0J 1A 1C 3.0 60 4×5.4 3.0 60 5×5.4 1.8 95 (60) (4×5.4) (3.0) 5×5.4 1.8 95 5×5.4 1.8 95 (4×5.4) (3.0) (60) (4×5.4) (3.0) (60) 5×5.4 1.8 95 5×5.4 1.8 95 6.3×5.4 1.0 140 (4×5.4) (3.0) (60) (4×5.4) (3.0) (60) (5×5.4) (1.8) (95) 5×5.4 1.8 95 6.3×5.4 1.0 140 6.3×5.4 1.0 140 (4×5.4) (3.0) (60) (5×5.4) (1.8) (95) (5×5.4) (1.8) (95) 6.3×5.4 1.0 140 6.3×5.4 1.0 140 (5×5.4) (1.8) (95) 6.3×5.4 1.0 140 6.3×7.7 0.6 6.3×7.7 0.6 230 (6.3×5.4) (1.0) (140) 230 6.3×7.7 0.6 230 (6.3×5.4) (1.0) (140) 6.3×7.7 0.6 230 (5×5.4) (1.8) (95) (6.3×5.4) (1.0) (140) 6.3×7.7 0.6 230 6.3×7.7 0.6 230 (6.3×5.4) (1.0) (140) (6.3×5.4) (1.0) (140) 6.3×7.7 0.6 230 8×10.5 0.3 450 6.3×7.7 0.6 230 (6.3×5.4) (1.0) (140) 6.3×7.7 0.6 230 8×10.5 0.3 450 (6.3×7.7) (0.6) (230) 10×10.5 0.15 670 (8×10.5) (0.3) (450) 10×10.5 0.15 670 (8×10.5) (0.3) (450) 470 471 8×10.5 0.3 450 8×10.5 0.3 450 680 681 8×10.5 0.3 450 10×10.5 0.15 670 10×10.5 0.15 670 1000 102 10×10.5 0.15 670 (8×10.5) (0.3) (450) 10×10.5 0.15 670 10×10.5 0.15 670 1500 152 12.5×13.5 0.11 820 2200 222 3300 332 4700 472 10×13.5 0.13 750 12.5×13.5 0.11 820 (10×10.5) (0.15) (670) (10×13.5) (0.13) (750) 12.5×16 0.09 950 16×16.5 0.08 1260 16×16.5 0.08 1260 12.5×13.5 0.11 820 (10×13.5) (0.13) (750) 12.5×16 0.09 950 (12.5×13.5) (0.11) (820) 16×16.5 0.08 1260 16×16.5 0.08 1260 (12.5×16) (0.09) (950) 16×16.5 0.08 1260 Impedance Ripple Current Case Size ØD×L(mm) (Ω) at 20℃ (mA rms) at 100kHz 105℃ 100kHz Please visit our website to get more update data, those data & specification are subject to change without notice www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCD DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE WV/V Cap/μF 25 35 50 1E 1V 1H 1 010 4×5.4 3.0 60 4×5.4 5.0 30 1.5 1R5 4×5.4 3.0 60 4×5.4 5.0 30 2.2 2R2 4×5.4 3.0 60 4×5.4 5.0 30 3.3 3R3 4×5.4 3.0 60 4×5.4 5.0 30 4.7 4R7 4×5.4 3.0 60 4×5.4 3.0 60 5×5.4 3.0 50 6.8 6R8 4×5.4 3.0 60 5×5.4 1.8 95 6.3×5.4 2.0 70 10 100 5×5.4 (4×5.4) 1.8 (3.0) 95 (60) 5×5.4 (4×5.4) 1.8 (3.0) 95 (60) 6.3×5.4 2.0 70 15 150 6.3×5.4 1.8 95 5×5.4 1.8 95 6.3×5.4 2.0 70 6.3×5.4 (5×5.4) 6.3×5.4 (5×5.4) 6.3×7.7 (6.3×5.4) 1.0 (1.8) 1.0 (1.8) 0.6 (1.0) 140 (95) 140 (95) 230 (140) 6.3×5.4 (5×5.4) 1.0 (1.8) 140 (95) 6.3×7.7 (6.3×5.4) 1.0 (2.0) 120 (70) 6.3×5.4 1.0 140 6.3×7.7 1.0 120 6.3×7.7 (6.3×5.4) 0.6 (1.0) 230 (140) 6.3×7.7 1.0 120 22 220 33 330 47 470 68 680 6.3×7.7 0.6 230 6.3×7.7 0.6 230 8×10.5 0.6 300 100 101 6.3×7.7 0.6 230 8×10.5 0.3 450 8×10.5 0.6 300 10×10.5 0.3 500 Ripple 150 151 8×10.5 (6.3×7.7) 0.3 (0.6) 450 (230) 8×10.5 0.3 450 Case Size ØD×L(mm) Impedance Current (Ω) at 20℃ (mA rms) at 100kHz 105℃ 100kHz WV/V Cap. (μF) 25 35 50 1E 1V 1H 220 221 8×10.5 0.30 450 10×10.5 (8×10.5) 0.15 (0.30) 670 (450) 10×10.5 0.30 500 330 331 10×10.5 (8×10.5) 0.15 (0.30) 670 (450) 10×10.5 0.15 670 16×16.5 (12.5×13.5) (10×13.5) 0.12 (0.20) (0.25) 1060 (650) (580) 470 471 10×10.5 0.15 670 10×10.5 0.15 670 16×16.5 (12.5×16) 0.12 (0.15) 1060 (700) 680 681 10×13.5 0.13 750 12.5×13.5 (10×13.5) 0.11 (0.13) 820 (750) 16×16.5 0.12 1060 1000 102 16×16.5 (12.5×13.5) 0.08 (0.11) 1260 (820) 16×16.5 (12.5×16) 0.08 (0.09) 1260 (950) 1500 152 12.5×16 0.09 950 16×16.5 0.08 1260 2200 222 16×16.5 0.08 1260 Case Size ØD×L(mm) Impedance (Ω) at 20℃ 100kHz Ripple Current (mA rms) at 105℃ 100kHz Please visit our website to get more update data, those data & specification are subject to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283 SMD Aluminum Electrolytic Capacitor – JCD FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT 50Hz 120Hz 300Hz 1KHz 10KHz~ 1~68µF 0.35 0.50 0.64 0.83 1.00 100~2200µF 0.40 0.55 0.70 0.85 1.00 ~680µF 0.45 0.65 0.80 0.90 1.00 1000~4700µF 0.65 0.85 0.95 1.00 1.00 Frequency Ø4~Ø10 Coefficient Ø12.5~Ø16 Please visit our website to get more update data, those data & specification are subject to change without notice. www.jbcapacitors.com www.jbcapacitors.hk E-mail: [email protected] Tel : (852)2790 5091 Fax: (852)8169 8283