Designed for Rugged Excellence V1.0 Jun, 2016 IGPMC-111GP Industrial Gigabit PoE Ethernet to fiber media converter with 1x10/100/1000Base-T(X) P.S.E. and 1x100/1000Base-X, SFP socket Features Support 1 port 10/100/1000Base-T(X) P.S.E. auto-negotiation and auto-MDI/MDI-X copper port Support 1 port 100/1000Base-X SFP fiber port P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts Support Jumbo Frame up to 9K Bytes Support LFP (Link Fault Pass-through) function Relay output to carry capacity of 1A at 24 VDC for warning system Provided DIP-Switch to setting function Rigid IP-30 housing design DIN-Rail and wall mounting enabled * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Jun, 2016 Introduction The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. The IGPMC-111GP with wide operating temperature range from -40 ~ 75oC and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating environment. Connections of Media converter * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Jun, 2016 PoE Pin Definition 10/100Base-T(X) P.S.E. RJ-45 port 1000Base-T P.S.E. RJ-45 port RJ-45 Pin Definition RJ-45 Pin Definition Pin No. Description Pin No. Description #1 TD+ with PoE Power input + #1 BI_DA+ with PoE Power input + #2 TD- with PoE Power input + #2 BI_DA- with PoE Power input + #3 RD+ with PoE Power input - #3 BI_DB+ with PoE Power input - #4 Not used #4 BI_DC+ #5 Not used #5 BI_DC- #6 RD- with PoE Power input - #6 BI_DB- with PoE Power input - #7 Not used #7 BI_DD+ #8 Not used #8 BI_DD- DIP-Switch Setting 3-PIN Description DIP-Switch 1 DIP-Switch No. 1 Function Power-1 failure detection 2 Power-2 failure detection 3 LFP warning detection DIP-Switch Status ON When power-1 failure, enable relay output OFF Disable power-1 failure detection ON When power-2 failure, enable relay output OFF Disable power-2 failure detection ON LFP signals when detected, enable relay output OFF Disable LFP signals detection 3-PIN Description DIP-Switch 2 DIP-Swith No. Function 1 100/1000Base-FX mode selection 2 LFP function DIP-Switch Status ON 100Base-FX mode OFF 1000Base-FX mode ON Enable LFP function OFF Disable LFP function ON 3 LFP control PoE output OFF LFP signal when it is detected, the PoE output is stopped PoE continuous power supply * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Jun, 2016 Specifications ORing PoE Media Converter IGPMC-111GP Model Physical Ports 10/100/1000 Base-T(X) P.S.E. Port in 1 RJ45 Auto MDI/MDIX 100/1000Base-X SFP port 1 Technology IEEE 802.3i for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX Ethernet Standards IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) Jumbo Frame 9K Bytes (1G mode only) LED Indicators Power / Ready Indicator Green: Power LED x 2 LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable 100/1000Base-X SFP Port Indicator Green for port Link/Act 10/100/1000Base-T(X) Port Duplex Mode Indicator Green LED – (ON) Full-duplex mode / (OFF) Half-Duplex mode 10/100/1000Base-T(X) RJ45 port Green for Link/Act Indicator Dual color LED for speed – Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps Fault Indicator (Fault) Amber : Indicate unexpected event occurred PoE indicator Green: Power is supplied over Ethernet cable. Fault Contact Relay Relay output to carry capacity of 1A at 24 VDC Power Input Power Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block Power Consumption (Typ.) 4Watts Overload Current Protection Present Reverse Polarity Protection Present Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 40 (W) x70 (D) x 95 (H) mm Weight (g) 291g Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 75oC (40 to 167oF) Operating Humidity 5% to 95% Non-condensing Regulatory approvals EMI EMS FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 MTBF 1,116,093hrs Warranty 5 years * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Jun, 2016 Ordering Information IGPMC-1 A B CC Code Definition Option 10/100/1000Base-T(X) Port Number 100/1000Base-X Fiber Port Number Fiber Port Type - 1: 1 port - 1: 1 port - GP : 100/1000Base-X SFP Model Name Available Model IGPMC-111GP Description Industrial Gigabit Ethernet to fiber PoE media converter with 1x10/100/1000Base-T(X) P.S.E. and 1x100/1000Base-X, SFP socket Packing List O IGPMC-111GP x 1 Wall-mount Kit x 1 Quick Installation Guide x 1 DIN-Rail Kit x 1 Optional Accessories O SFP 100 series : 100Mbps SFP optical transceiver SFP 1G series : 1Gbps SFP optical transceiver * All specifications are subject to change without notice.