DTA114YE/DTA114YUA/DTA114YKA /DTA114YSA/DTA114YCA TRANSISTOR(PNP) FEATURES 1. Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit). 2. The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input.They also have the advantage of almost completely eliminating parasitic effects. 3. Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA114YUA DTC114EUA DTA114YE SOT-323 SOT-523 Addreviated symbol: 54 Addreviated symbol: 54 DTA114YKA SOT-23-3L DTA114YCA SOT-23 Addreviated symbol: 54 Addreviated symbol: 54 DTA114YSA TO-92S １ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５ DTA114YE/DTA114YUA/DTA114YKA /DTA114YSA/DTA114YCA Absolute maximum ratings(Ta=25℃) Parameter Limits (DTA114Y□ ) Symbol E UA KA CA SA Unit Supply voltage VCC -50 V Input voltage VIN -40to+6 V IO -70 mA IC(Max.) -100 mA Output current 150 200 300 mW Power dissipation PC Junction temperature Tj 150 ℃ Storage temperature Tstg -55 to+ 150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Output voltage Input current Output current Symbol Min. Typ VI(off) VI(on) Max. -0.3 -1.4 VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-1mA -0.3 V IO/II=-5mA/-0.25mA II -0.88 mA VI=-5V IO(off) -0.5 µA VCC=-50V ,VI=0 68 Input resistance R1 7 10 13 Resistance ratio R2/R1 3.7 4.7 5.7 Transition frequency V Conditions VO(on) GI DC current gain Unit fT VO=-5V ,IO=-5mA 250 KΩ MHz VO=-10V ,IO=5mA,f=100MHz Typical Characteristics ２ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５