60W Multiple-Stage Constant Current Mode LED Driver Standard IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL (for EO-Type only) F LCM-60 series Optional Optional 110 M M R-41027766 SELV ■ Features Constant Current mode output with multiple levels selectable by dip switch Plastic housing with class II design Built-in active PFC function Standby power consumption <1W Functions: 3 in 1 dimming (dim-to-off); ■ Applications LED indoor lighting LED office lighting LED architectural lighting LED panel lighting Auxiliary DC output; synchronization up to 10 units Optional: Wireless LED driver with integrated EnOcean module 3 years warranty ■ Description LCM-60 series is a 60W LED AC/DC constant current mode output LED driver featuring the multiple levels selectable by dip switch. LCM-60 operates from 180～295VAC and offers different current levels ranging between 500mA and 1400mA. Thanks to the efficiency up to 92%, with the fanless design, the entire series is able to operate for -30℃~+90℃ case temperature under free air convection. LCM-60 is equipped with various functions, such as the dimming function and synchronization, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding LCM - 60 EO: Optional wireless EnOcean module Output wattage Series name Type Blank EO Function 3 in 1 dimming (dim-to-off) Wireless driver with integrated EnOcean module Note In Stock By r equest File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 series SPECIFICATION MODEL LCM-60 Current level selectable via DIP switch, please refer to”DIP SWITCH TABLE” section CURRENT LEVEL OUTPUT 500mA RATED POWER 60.3W DC VOLTAGE RANGE 2 ~ 90V OPEN CIRCUIT VOLTAGE (max.) 102V CURRENT RIPPLE Note.5 CURRENT TOLERANCE 700mA(default) 900mA 1050mA 1400mA 2 ~ 90V 2 ~ 86V 2 ~ 67V 2 ~ 57V 2 ~ 42V 76V 5.0% max. @rated current ±5% AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V)@50mA SETUP TIME 500ms / 230VAC Note.3 VOLTAGE RANGE INPUT 600mA Note.2 180 ~ 295VAC 254 ~ 417VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.975/230VAC, PF≧0.96/277VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20%(@load≧75%) TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section) Note.4 92% EFFICIENCY (Typ.) AC CURRENT (Typ.) 0.32A/230VAC INRUSH CURRENT (Typ.) COLD START 20A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 MAX. No. of PSUs on 16A CIRCUIT BREAKER 25 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.5mA / 240VAC STANDBY POWER CONSUMPTION Note.6 <1W SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 0.27A/277VAC 105 ~ 125V PROTECTION OVER VOLTAGE Shutdown o/p voltage, re-power on to recover OVER TEMPERATURE Shutdown o/p voltage,re-power on to recover WIRELESS PROTOCOL(Optional) EnOcean standard 868 MHz; Max. device(switch) saved into the memory : 33 Please refer to "DIMMING OPERATION" section DIMMING FUNCTION ENVIRONMENT SAFETY & EMC SYNCHRONIZATION Please refer to "SYNCHRONIZATION OPERATION” section TEMP. COMPENSATION By external NTC, please refer to “TEMPERATURE COMPENSATION OPERATION”section WORKING TEMP. Tcase=-30 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) MAX. CASE TEMP. Tcase=+90℃ WORKING HUMIDITY 20 ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 40℃) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent,GB19510.14,GB19510.1 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH EMC EMISSION OTHERS NOTE Note.7 Compliance to EN55015, EN61000-3-2 Class C(@load≧40%) ; EN61000-3-3; GB17625.1,GB17743 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level(surge immunity Line-Line 2KV) MTBF 260.6K hrs min. DIMENSION 123.5*81.5*23mm (L*W*H) PACKING 0.24Kg ; 54pcs/15Kg/1.12CUFT MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature. 2. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 4. Efficiency is measured at 900mA/67V output set by DIP switch. 5. Current ripple is measured 60%~100% of maximum voltage under rated power delivery. 6. Standby power consumption is measured at 180~230VAC. 7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 BLOCK DIAGRAM I/P series PFC fosc : 60KHz PWM fosc : 80KHz EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT O.L.P. PFC CONTROL O.T.P. PWM CONTROL RECTIFIERS +12Vaux RECTIFIERS & FILTER +V -V DIM+ DIM- CURRENT LIMIT MCU DETECTION CIRCUIT O.V.P. DIP SWITCH TABLE LCM-60 is a multiple-stage constant current driver, selection of output current through DIP switch is exhibited below. DIP S.W. 1 2 3 4 5 6 500mA ---- ---- ---- ---- ---- ---- 600mA ON ---- ---- ---- ---- ---- 700mA(factory default) ON ON ---- ---- ---- ---- 900mA ON ON ON ---- ---- ON 1050mA ON ON ON ON ---- ON 1400mA ON ON ON ON ON ON Io File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 series DIMMING OPERATION ※ 3 in 1 dimming function Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. For optional EO model, the 3 in 1 dimming is via SYNC+ and SYNC-(CN100 or CN101 connector). Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) ◎ Applying additive 0 ~ 10VDC 100% 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% ◎ Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V + 80% + - - DIM+ Additive Resistance Output current (%) +V 70% 60% 50% 40% 30% DIM“DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< I out<6%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. 3. Please do not activate”temperature compensation” when performing dimming operation. File Name:LCM-60-SPEC 2017-11-20 LCM-60 60W Multiple-Stage Output Current LED Power Supply series SYNCHRONIZATION OPERATION Synchronization up to 10 drivers (1 master + 9 slaves) Dimming operating range : 10%~100% Sync cable length : < 5m Sync cable type : Flat cable 2 Sync cable cross section area : 22 – 24 AWG (0.2~0.3mm ) SYN. - - LCM-60 (Slave 1) + + + + LCM-60 (Master) 5m SYN. - - + + SYN. - - LCM-60 (Slave 2) 5m NOTE: 1. Please make sure all units are set to 100% dimming setting (factory default) before synchronizing. 2. For optional EO model: the master is EO and the salve could be standard model for economic arrangement. 3. Min. Dimming operating range depends on dimmer setting. TEMPERATURE COMPENSATION OPERATION LCM-60 have the built-in temperature compensation function ; by connecting a temperature sensor (NTC resistor) between the +NTC / -NTC terminal of LCM-60 and the detecting point on the lighting system or the surrounding environment, output current of LCM-60 could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED. NTC derating curve 105 Output Current (%) 100 220KO 220KΩ 95 330KO 330KΩ 470KO 470KΩ 90 85 80 75 70 65 55 60 65 70 75 80 85 90 95 Sensed Temperature(℃) ◎ LCM-60 can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected through the DIP switch. ◎ NTC reference: NTC resistance Output Current 220K < 60℃, 100% of the rated current (corresponds to the setting current level) > 60℃, output current begins to reduce, please refer to the curve for details. 330K < 70℃, 100% of the rated current (corresponds to the setting current level) > 70℃, output current begins to reduce, please refer to the curve for details. 470K < 80℃, 100% of the rated current (corresponds to the setting current level) > 80℃, output current begins to reduce, please refer to the curve for details. Notes: 1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series. 2. If other brands of NTC resistor is applied,please check the temperature curve first. ◎ Dimming and synchronization function of the driver will be invalid when the "temperature compensation" function is in use. File Name:LCM-60-SPEC 2017-11-20 LCM-60 60W Multiple-Stage Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 100 Others 80 80 60 60 40 LOAD (%) LOAD (%) 100 1050mA / 1400mA 20 -30 -15 0 15 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE,Ta (℃) 40 20 -30 -25 0 20 45 55 65 75 90 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC 100 90 80 LOAD (%) 70 60 50 40 90 95 100 105 110 115 120 125 132 INPUT VOLTAGE (V) 60Hz ※ De-rating is needed under low input voltage. File Name:LCM-60-SPEC 2017-11-20 LCM-60 60W Multiple-Stage Constant Current Mode LED Driver series TOTAL HARMONIC DISTORTION (THD) ※ Tcase at 80℃ 80% 60% 70% 60% 40% 500mA 600mA 30% THD THD 50% 700mA 20% 600mA 40% 700mA 30% 900mA 900mA 20% 1050mA 10% 500mA 50% 1050mA 10% 1400mA 1400mA 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 10% 20% 30% LOAD (230Vac Input) 40% 50% 60% 70% 80% 90% 100% LOAD (277Vac Input) POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 80℃ 1.00 0.97 0.94 500 0.88 600 0.85 700 0.82 900 0.79 1050 PF PF 0.91 1400 0.76 0.73 0.70 1.00 0.97 0.94 0.91 0.88 0.85 0.82 0.79 0.76 0.73 0.70 0.67 0.64 0.61 0.58 0.55 0.52 0.49 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (60W) 500 600 700 900 1050 1400 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% (60W) LOAD (230Vac Input) LOAD (277Vac Input) EFFICIENCY vs LOAD LCM-60 series possess superior working efficiency that up to 91% can be reached in field applications. ※ Tcase at 80℃ 95.0% 95.0% 90.0% 90.0% 85.0% 80.0% 500 75.0% 600 700 70.0% 900 65.0% 1050 60.0% 1400 55.0% EFFICIENCY (%) EFFICIENCY (%) 85.0% 80.0% 500 75.0% 600 70.0% 700 65.0% 900 60.0% 1050 55.0% 1400 50.0% 45.0% 40.0% 50.0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD (230Vac Input) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD (277Vac Input) File Name:LCM-60-SPEC 2017-11-20 LCM-60 60W Multiple-Stage Constant Current Mode LED Driver MECHANICAL SPECIFICATION Case No.LCM-60A series Unit:mm 123.5 6.75 6.75 6.75 110 2 -ψ 4.2 1 6.75 2 TB1 68 SYN. 1 2 CN101 3 4 CN100 1 2 TB5 ON 1 2 3 4 5 6 39.3 65.5 7.8 2-ψ4 4 7.8 23 40 tc 15 81.5 TB3 1 2 3 4 5 6 Bottom View tc : Max. Case Temperature ※ Terminal Pin No. Assignment( TB1 ) Pin No. 1 2 Assignment AC/L AC/N ※ Terminal Pin No. Assignment( TB3 ) Pin No. 1 2 Assignment +FAN -FAN Pin No. 3 4 Assignment +NTC -NTC Pin No. 5 6 Assignment DIM+ DIM- ◎ Pin1 (+FAN) / Pin2 (-FAN) is the Auxiliary DC output;it can be used to drive fan. ※ Terminal Pin No. Assignment( TB5 ) Pin No. 1 2 Assignment +V -V ※ SYN. Connector( CN101/CN100 ):JST B2B-XH or equivalent Pin No. 1,3 2,4 Assignment + - Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 series ※The following is only for Optional EO model: LRN button description LRN (Learn) Button: Shortly press (around 2 second) the button to enter linking (pairing) / unlinking mode. The LED lamp connected at the output of LCM starts toggling between 10% and 90% indicating that linking mode is active. Once activated, this mode stays active to provide time to link or unlink multiple switches. The mode will stop and bak to normal mode after 30 seconds if no wireless telegram from switch is received. For the switch to be linked, click the”I” button (top button marked on the switch plastic or “I” symbol on the back of the switch 4 times quickly, In case the output is continuous 100% 4 seconds, it mean the switch is linked successfully. The LED driver is now ready to accept new links on another switch. In case a linked switch to be unlinked, please use the same action as described from the linking method above. To exit linking / unlinking mode and return to normal operation, wait 30 seconds without doing anything or shortly press the button again. In order to clear all linked switches and reset the LED driver to factory settings, please press and hold the button for 10 seconds. Installation & Pairing Hareware connection: 1.Connect the LED lamp to the driver. 2.Connect the driver to the AC mains. There are two approaches for linking(pairing): 1.Using the LRN button on the driver The instruction is in the LRN button description. 2.Using the NAVIGAN wireless software Benefit to use NAVIGAN is more dimming parameters can be configured . The software can be download in the website link below. http://www.navigan.com/ After the software installation, insert the NWC300 into one of USB port from the computer. For more details, please check the manual. NWC300 File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver ※The following is only for Optional EO model LCM-60 Case No.LCM-60A series Unit:mm MECHANICAL SPECIFICATION tc : Max. Case Temperature 2 -ψ 4.2 tc 2-ψ4 ※ Terminal Pin No. Assignment( TB1 ) Pin No. 1 2 Assignment AC/L AC/N ※ Terminal Pin No. Assignment( TB3 ) Pin No. 1 2 Assignment +NTC -NTC ※ Terminal Pin No. Assignment( TB5 ) Pin No. 1 2 Assignment +Vo -Vo ※ SYN. or DC 0-10V Dimming Connector( CN101/CN100 ):JST B2B-XH or equivalent Pin No. 1,3 2,4 Assignment + - Mating Housing Terminal JST XHP or equivalent JST SXH-001T-P0.6 or equivalent File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 series Interoperable products / EnOcean Equipment Profile(EEP) Support Equipment Telegram Rocker Pad Switch F6-02-02 Occupancy Sensor F5-07-01 Occupancy Sensor A5-07-02 Occupancy Sensor A5-07-03 Light Level Sensor A5-06-02 Light Level Sensor A5-06-03 Central Controller A5-38-08 Demand Response A5-37-01 Batteryless wireless switch supplier MW order code:WPD-06SWT. There are many other switch supplier listed in the below. Manufacturer Model* Legrand 0 784 42 Siemens 5WG4222-3AB10 Berker 24121009 Jung ENO A 595 Busch-jaeger EASYSENS/ENOCEAN Gira 2422 03 Peha D 455/61.022 FU-BLS N Eltako F4T65 VIMAR 20505+20506.B+21507.B *: The model list is rovided for reference. For more information please contact original supplier File Name:LCM-60-SPEC 2017-11-20 60W Multiple-Stage Constant Current Mode LED Driver LCM-60 series World Coverage Map COUNTRY/REGION STANDARD Aruba Possibly R & TTE Directive Australia / New Zealand N.A. FREQUENCY 868 MHz-Confirm with test house Barbados N.A. Note1 Bermuda N.A. Note1 Bolivia N.A. Note1 Brazil ANATEL 868 MHz British Virgin Islands N.A. Note1 Cayman Islands Possibly R & TTE Directive 868 MHz CEPT(European regional)* EN 300 220 868 MHz Chile Possibly R & TTE Directive 868 MHz China CNAS/MITT EN 300 220 868 MHz Colombia Possibly ANATEL 868 MHz Ecuador N.A. Note1 EI Salvador Possibly R & TTE Directive 868 MHz French Guiana ETSI EN 300 220 868 MHz Guatemala N.A. Note1 Hong Kong Possibly 315MHz Note1 India Possibly 315MHz Note1 Israel Possibly 315MHz Note1 Jamaica N.A. Note1 Japan 920** ARIB STD-T108 928 MHz Malaysia SKMM WTS SRD / EN 300 220 868 MHz Mexico We believe Mexico does not accept FCC 868 MHz Nicaragua N.A. Note1 Peru N.A. Note1 Panama FCC CFR47 Part 15.249 902 MHz Russia N.A. Singapore TS SRD / EN 300 220 868 MHz South Africa CASA / EN 300 220 868 MHz South Korea N.A. Suriname N.A. Note1 Taiwan Possibly 315 MHz Note1 Trinidad & Tabago N.A. Note1 Turks & Caicos Islands Possibly R & TTE Directive 868 MHz UAE EN 300 220 868 MHz Uruguay N.A. Note1 USA / Canada FCC CFR47 Part 15.249 315 MHz, 902 MHz Note1: It is suggested to check with local accredited certification angency. *CEPT is the European regional organization dealing with postal and telecommunications issues and presently has 45 Members: Albania, Andorra, Austria, Azerbaijan, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Netherlands, Norway, Poland, Portugal, Romania, Russian Federation, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland, The former Yugoslav Republic of Macedonia, Turkey, Ukraine, United Kingdom, and Vatican. **In February 2012, Japanese regulatory body ARIB(Association of Radio Industries and Businesses) released new 920 MHZ frequency band for radio equipment, due to LTE rollout, The 950 MHz frequency band will be obsolete by end of 2015. File Name:LCM-60-SPEC 2017-11-20