AC AXIAL FAN 120x120x38mm FAA1-12038-A Series Features: Motor: Shaded Pole Induction Motor Motor Protection: Impedance Protected Bearing Type: Two Ball, Sleeve, or Hydro Dynamic Connection: UL 1430 AWG 22, 280mm Wire Leads or Terminal Frame Material: Aluminum Alloy Impeller Material: Plastic UL94V-0 Operating Temp: Two Ball: -10°C~70°C Sleeve: -10°C~60°C Hydro Dynamic: -10°C~70°C Life Expectancy: Two Ball: 50,000 Hours Sleeve: 30,000 Hours Hydro Dynamic: 50,000 Hours Fan-S Division Volt. Freq. Current Power Rated Speed (VAC) (Hz) (A) (W) (rpm) Model No. Maximum AirFlow (CMM) (CFM) Maximum Static Pressure (InAq) (mmAq) Noise Level (dB/A) Weight (g) FAA1-12038N * K ** 31-A 115 50/60 0.28/0.24 21.20/19.20 2400/2600 2.720/3.030 96.0/107.0 0.240/0.250 6.096/6.350 46.4/48.1 550 FAA1-12038Q * K ** 31-A 230 50/60 0.14/0.12 17.50/19.80 2400/2600 2.720/3.030 96.0/107.0 0.240/0.250 6.096/6.350 46.4/48.1 550 FAA1-12038N * J ** 31-A 115 50/60 0.27/0.22 20.40/17.20 2700/3100 2.410/2.750 91.2/103.5 0.310/0.350 8.170/9.070 42.6/47.0 550 FAA1-12038Q * J ** 31-A 230 FAA1-12038N * H ** 31-A 115 50/60 0.13/0.11 20.80/17.60 2700/3100 2.410/2.750 91.2/103.5 0.310/0.350 8.170/9.070 42.6/47.0 550 50/60 0.24/0.19 17.00/14.00 2600/2900 2.410/2.750 85.0/97.0 0.310/0.350 7.900/8.870 42.2/44.5 550 FAA1-12038Q * H ** 31-A 230 50/60 0.11/0.09 17.10/14.80 2600/2900 2.410/2.750 85.0/97.0 0.310/0.350 7.900/8.870 42.2/44.5 550 FAA1-12038N * M ** 31-A 115 50/60 0.18/0.15 13.80/12.40 2600/2800 2.310/2.460 81.5/87.0 0.240/0.210 6.196/5.334 41.0/42.0 550 FAA1-12038Q * M ** 31-A 230 FAA1-12038N * L ** 31-A 115 50/60 0.08/0.07 13.80/12.50 2600/2800 2.310/2.460 81.5/87.0 0.240/0.210 6.196/5.334 41.0/42.0 550 50/60 0.12/0.11 9.00/8.70 2400/2200 2.150/2.020 76.0/71.5 0.180/0.100 4.572/2.540 40.1/37.9 550 FAA1-12038Q * L ** 31-A 230 50/60 0.06/0.05 9.80/9.40 2400/2200 2.150/2.020 76.0/71.5 0.180/0.100 4.572/2.540 40.1/37.9 550 FAA1-12038N * A ** 31-A 115 50/60 0.08/0.08 7.00/6.60 2300/1700 1.980/1.520 70.0/53.5 0.130/0.060 3.302/1.524 39.2/30.5 550 FAA1-12038Q * A ** 31-A 230 50/60 0.04/0.04 8.10/7.70 2300/1700 1.980/1.520 70.0/53.5 0.130/0.060 3.302/1.524 39.2/30.5 550 * Indicates “B” (Ball Bearing), “S” (Sleeve Bearing), or “H” (Hydro Dynamic) ** Indicates “W” (Wire Leads) or “T” (Terminal) 60Hz 50Hz 0.0 Noise is measured at the distance of one (1) meter from the axis of intake. 0.6 1.1 1.7 2.3 2.8 10.0 0.0 3.4 0.4 0.6 1.1 1.7 2.3 2.8 10.0 J K K H H M M L 3.4 0.4 J L 0.32 8.0 6.0 0.24 6.0 0.24 4.0 0.16 4.0 0.16 2.0 0.08 2.0 0.08 8.0 A 0.0 0.0 20.0 40.0 60.0 80.0 100.0 0 120.0 ISO-9001 Company A 0.0 0.0 20.0 40.0 60.0 80.0 100.0 0.32 0 120.0 Qualtek Electronics Corporation www.qualtekusa.com