AZ989 25 AMP SUB-MICRO AUTOMOTIVE RELAY FEATURES • Up to 25 Amp switching capability in a very compact size • Vibration and shock resistant • Designed for power windows, door locks and wiper motors, seat adjusters, and more • Epoxy sealed for automatic wave soldering • ISO/TS 16949, ISO9001, ISO14000 • Tested in accordance with SAE J2544 • Cost effective • Single and Dual (Twin) relay versions GENERAL DATA CONTACTS Arrangement SPDT (1 Form C) DPDT (2 Form C) (Twin) Ratings Resistive load: Max. switched power: 400 W Max. switched current: 25 A Max. switched voltage: 16 VDC Rated load: 25 A at 16 VDC, locked motor Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at 25 A 14 VDC locked motor Operate Time 3 ms typical at nominal coil voltage Release Time 1.5 ms typical at nominal coil voltage (with no coil suppression) Material Silver tin oxide Dielectric Strength 500 VAC coil to contact (at sea level for 1 min.) 500 VAC between open contacts Resistance < 25 milliohms initially (6 V, 1 A voltage drop method) Insulation Resistance 100 megohms min. at 20°C, 500 VDC 50% RH Dropout Greater than 8.3% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 155°C (311°F) Vibration 5g at 10-500 Hz Shock 10g operational, 100g destructive Enclosure P.B.T. polyester COIL Power At Pickup Voltage (typical) 230 mW Max. Continuous Dissipation 2.2 W at 20°C (68°F) ambient Temperature Rise 40°C (72°F) at nominal coil voltage Terminals Tinned copper alloy, P.C. 155°C (311°F) Max. Solder Temp 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp 80°C (176°F) Max. Immersion Time 30 Seconds Weight 4 grams Max Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 1/24/06W AZ989 RELAY ORDERING DATA STANDARD RELAYS - 1 Form C (Single) ORDER NUMBER COIL SPECIFICATIONS Nominal Coil VDC 12 12 Must Operate VDC 6.5 7.2 Max. Continuous VDC 18.0 20.0 Coil Resistance ± 10% 180 225 1 Form C (SPDT) AZ989–1C–12DE AZ989–1C–12DSE STANDARD RELAYS - 2 Form C (Twin) ORDER NUMBER COIL SPECIFICATIONS Nominal Coil VDC 12 12 Must Operate VDC 6.5 7.2 Max. Continuous VDC 18.0 20.0 Coil Resistance ± 10% 180 225 2 Form C (DPDT) AZ989–2C–12DE AZ989–2C–12DSE MECHANICAL DATA OUTLINE DIMENTIONS OUTLINE DIMENTIONS TWIN RELAYS SINGLE RELAY .563MAX [14.3] WIRING DIAGRAM .618MAX [15.7] .563MAX [14.3] .295MAX [7.5] 4 5 1 .543MAX [13.8] .016 [0.4] .276 [3.5] .543MAX [13.8] .016 [0.4] 3 SINGLE RELAY .012 [0.3] .138 [3.5] 2 4 5 1 .157 [4.0] .331 [8.4] .189 [4.8] .157 [4.0] 2-.020x.012 [0.5x0.3] 3-.047x.012 [1.2x0.3] 3 .331 [8.4] 2 9 6-.047x.012 [1.2x0.3] .189 [4.8] 8 .134 [3.4] .031 [0.8] BOTTOM VIEW 10 6 7 TWIN RELAY .189 [4.8] .031 [0.8] 4-.012x.020 [0.3x1.2] BOTTOM VIEW VIEWED TOWARD BOTTOM Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1/24/06W