DATA SHEET PHOTO DIODE NDL5421P Series 1 000 to 1 600 nm OPTICAL FIBER COMMUNICATIONS φ 50 µm InGaAs PIN PHOTO DIODE MODULE DESCRIPTION NDL5421P Series is an InGaAs PIN photo diode module with multimode fiber. It is designed for 2.5Gb/s optical fiber communication systems and covers the wavelength range between 1 000 and 1 600 nm with high efficiency. FEATURES • Small dark current ID = 0.1 nA • High quantum efficiency η = 86 % @ λ = 1 300 nm η = 75 % @ λ = 1 550 nm φ 50 µm • Detecting area size • Low operating voltage VR = 5 V • Low terminal capacitance Ct = 0.7 pF @ f = 1.0 MHz, VR = 5 V • High speed response fC = 2.5 GHz min. • Coaxial module with multimode fiber (GI-50/125) or optional siglemode fiber (SM-9/125) • PACKAGE DIMENSIONS in millimeters NDL5421P1 Optical Fiber: GI-50/125 Length: 1 m MIN. Shrunk tube φ 2.0 30.0 MAX. 30.0 MAX. 1 φ 6.0 +0.0 –0.1 φ 2.0 18.0±0.1 2–φ2.5 2 3 1 φ 2.0 12.0±0.1 PIN CONNECTIONS 1 Anode (Negative) 2 Cathode (Positive) 3 Case 12.5 MIN. 12.5 MIN. 3.9±0.5 2 3 φ2.5 4.0±0.3 1 2–φ2.2 7.0±0.3 1.5 2 3 3.0±0.3 φ 0.45 12.5 MIN. 4.0±0.1 φ 6.0 +0.0 –0.1 6.9±0.3 φ 6.0+0.0 –0.1 6.0+0.0 –0.1 φ2.5 14.0±0.1 30.0 MAX. φ 2.5 Shrunk tube 2.5±0.1 0.5±0.1 Shrunk tube 6.9±0.3 NDL5421P2 Optical Fiber: GI-50/125 Length: 1 m MIN. 7.0±0.15 NDL5421P Optical Fiber: GI-50/125 Length: 1 m MIN. 16.0±0.2 3 2 1 The information in this document is subject to change without notice. Document No. P10262EJ2V0DS00 (2nd edition) Date Published June 1996 P Printed in Japan The mark • shows major revised points. © 1995 NDL5421P Series • ORDERING INFORMATION Part Number Available Connector NDL5421P Without Connector NDL5421PC With FC-PC Connector NDL5421PD With SC-PC Connector NDL5421PS Without Connector NDL5421PSC With FC-PC Connector NDL5421PSD With SC-PC Connector NDL5421P1 Without Connector NDL5421P1C With FC-PC Connector NDL5421P1D With SC-PC Connector NDL5421P1S Without Connector NDL5421P1SC With FC-PC Connector NDL5421P1SD With SC-PC Connector NDL5421P2 Without Connector NDL5421P2C With FC-PC Connector NDL5421P2D With SC-PC Connector NDL5421P2S Without Connector NDL5421P2SC With FC-PC Connector NDL5421P2SD With SC-PC Connector Description GI-50/125 No Flange SM-9/125 GI-50/125 Flat Mount Flange SM-9/125 GI-50/125 Vertical Flange SM-9/125 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Reverse Voltage VR 20 V Forward Current IF 10 mA Optical Input Power Pin 8 mW Operating Case Temperature TC −40 to +85 °C Storage Temperature Tstg −40 to +85 °C ELECTRO-OPTICAL CHARACTERISTICS (TC = 25 °C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Dark Current ID VR = 5 V 0.1 1.0 nA Terminal Capacitance Ct VR = 5 V, f = 1.0 MHz 0.7 0.9 pF Quantum Efficiency η λ = 1 300 nm 75 86 λ = 1 550 nm 64 75 λ = 1 300 nm 0.78 0.89 λ = 1 550 nm 0.80 0.94 VR = 5 V, RL = 50 Ω, λ = 1 300 nm 2.5 Responsivity Cut-off Frequency 2 S fC % A/W GHz NDL5421P Series WAVELENGTH DEPENDENCE OF QUANTUM EFFICIENCY Quantum Efficiency η (%) 100 80 60 40 20 0 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Wavelength λ ( µ m) 1.6 1.7 Responsivity (Relative Value) ∆ S/S (%) TYPICAL CHARACTERISTICS (TC = 25 °C, unless otherwise specified) TEMPERATURE DEPENDENCE OF RESPONSIVITY 10 λ = 1 300 nm 0 –10 –60 REVERSE VOLTAGE DEPENDENCE OF DARK CURRENT Dark Current ID (nA) 10 TC = 75 ˚C 1.0 50 ˚C –40 40 60 –20 0 20 Case Temperature TC (˚C) 80 100 TEMPERATURE DEPENDENCE OF DARK CURRENT 1 10 • VR = 5 V 0 10 –1 10 –2 10 25 ˚C –60 0.1 –40 –20 0 60 20 40 Case Temperature TC (˚C) 80 100 REVERSE VOLTAGE DEPENDENCE OF TERMINAL CAPACITANCE 0 ˚C 2 f = 1.0 MHz Terminal Capacitance Ct (pF) Dark Current ID (nA) –3 10 –25 ˚C 0.01 0.001 0 10 Reverse Voltage VR (V) 1 0.5 20 0.3 0.1 0.3 1 3 Reverse Voltage VR (V) 10 3 NDL5421P Series FREQUENCY RESPONSE 12 VR = 5 V λ = 1 300 nm 9 Pin = −10 dBm RL = 50 Ω Response (dB) 6 3 0 −3 −6 −9 −12 −15 0 2.5 Frequency f (GHz) 4 5.0 NDL5421P Series HANDLING PRECAUTION for PD/APD MODULE The NEC PD/PAD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling precautions. 1. Do not make the fiber bend radius less than 30 mm (*3). 2. Do not bend the fiber within the 18 mm section from the module body (*4). 3. Do not stress the ferrule with a lateral force exceeding 500 g (*5). 30 m m fiber in m ) (*3 ferrule (*5) 18 mm min. (*4) (*1) (*2) module body 5 NDL5421P Series • InGaAs APD/PD FAMILY Features APD Packages TO-18 type Can φ30 µ m φ50 µ m (for 2.5 Gb/s) (for 2.5 Gb/s) NDL5530 PIN-PD φ50 µ m φ50 µ m φ80 µ m φ80 µ m Remarks (for 2.5 Gb/s) NDL5500 NDL5510 3 pins *3,4 NDL5490L TO-18 type Can NDL5405L 3 pins with Micro Lens Small Can *3,4 NDL5490 NDL5531 φ5.6 µ m Chip on Carrier NDL5530C NDL5520C NDL5500C NDL5510C Receptacle Module NDL5471RC 3 pins NDL5471RD RC: FC receptacle RD: SC receptacle *2 Coaxial Module with NDL5521P NDL5551P NDL5561P MMF NDL5521P1 NDL5551P1 NDL5561P1 NDL5521P2 NDL5551P2 NDL5561P2 NDL5553P NDL5421P NDL5461P P1, P2: With flange *2 NDL5421P1 NDL5461P1 NDL5590P Series: With *2 NDL5421P2 NDL5461P2 Pre-AMP *1 *1 NDL5553P1 *1 NDL5553P2 NDL5590P NDL5590P1 NDL5590P2 Coaxial Module with SMF NDL5553PS NDL5531P NDL5531P1 NDL5531P2 *1 NDL5481P *5 NDL5553P1S *1 NDL5481P1 NDL5553P2S *1 *5 NDL5481P2 *5 14-pin DIP Module NDL5506P ∆T = 45 K (@ Ic = 1.1 A) with TEC NDL5506PS PS: With SMF 6-pin BFY Module NDL5522P NDL5422P with MMF *1 For OTDR *2 With GI-62.5/125 *3 Under development *4 Internal pre-amplifier for 1Gb/s *5 For analog application (optical CATV) Remark 6 Modules are available with FC-PC connector or optional SC-PC connector. With Pre-AMP NDL5421P Series REFERENCE Document Name Document No. NEC semiconductor device reliability/quality control system LEI-1201 Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535E Guide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E 7 NDL5421P Series CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5