Luckylight 4.8mm Round Wide Viewing Angle Type White LED Technical Data Sheet Part No.: LL-484WM1F-W5-1J Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 1 OF 8 http://www.luckylight.cn Luckylight Features: ◇ Wide viewing angle=100°. ◇ Reliable and robust. ◇ Emission color: X=0.35, y=0.38. ◇ Industrial standard footprint. ◇ The product itself will remain within RoHS compliant version. Descriptions: ◇ The series is specially designed for applications requiring higher brightness. ◇ The LED lamps are available with different colors. ◇ The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence, the mixture of blue light and yellow light results in white emission. ◇ Utilizing advanced InGaN chip technology. Applications: ◇ TV set. ◇ Monitor. ◇ Telephone. ◇ Computer. ◇ Circuit board. ◇ Status indicators. ◇ Commercial use. ◇ Advertising Signs. ◇ Back lighting. Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 2 OF 8 http://www.luckylight.cn Luckylight Package Dimension: Part No. Chip Material Lens Color Source Color LL-484WM1F-W5-1J InGaN White Diffused White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted. 3. Protruded resin under flange is 1.00 mm (.039″) max. Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 3 OF 8 http://www.luckylight.cn Luckylight Absolute Maximum Ratings at Ta=25℃ Parameters Symbol Max. Unit Power Dissipation PD 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) IFP 100 mA Forward Current IF 25 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40℃ to +80℃ Storage Temperature Range Tstg -40℃ to +85℃ Lead Soldering Temperature [4mm (.157″) From Body] Tsld 260℃ for 5 Seconds Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LEDs are not designed to be driven in reserve bias. Electrical Optical Characteristics at Ta=25℃ Parameters Symbol Min. Typ. Max. Unit Test Condition 2θ1/2 --- 100 -- Deg IF =20mA Forward Voltage VF 2.8 3.3 3.8 V IF =20mA Reverse Current IR --- --- 10 µA VR=5V x --- 0.35 --- --- y --- 0.38 --- --- Iv 1000 1700 --- mcd Viewing Angle IF =20mA Chromaticity Coordinates Luminous Luminous IF =20mA Notes: 1. Luminous Intensity Measurement allowance is ± 10%. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 4 OF 8 http://www.luckylight.cn Luckylight CIE 1931 Chromaticity Diagram Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 5 OF 8 http://www.luckylight.cn Luckylight Reliability Test Items And Conditions: The reliability of products shall be satisfied with items listed below: Confidence level: 90%. LTPD: 10%. 1) Test Items and Results: Test Item Standard Test Method Resistance to Soldering Heat JEITA ED-4701 300 302 Solder ability Thermal Shock Temperature Cycle Moisture Resistance Cycle High Temperature Storage Terminal Strength (Pull test) Terminal Strength (bending test) Temperature Humidity Storage Low Temperature Storage Steady State Operating Life Steady State Operating Life of High Humidity Heat Steady State Operating Life of Low Temperature JEITA ED-4701 300 303 JEITA ED-4701 300 307 JEITA ED-4701 100 105 JEITA ED-4701 200 203 JEITA ED-4701 200 201 JEITA ED-4701 400 401 JEITA ED-4701 400 401 JEITA ED-4701 100 103 JEITA ED-4701 200 202 Test Conditions Note Number of Damaged Tsld=260±5℃, 10sec 4mm from the base of the epoxy bulb Tsld=235±5℃, 5sec(using flux) 1 time 0/100 1time over 95% 0/100 0℃~100℃ 15sec, 15sec 100 cycles 0/100 100 cycles 0/100 10 cycles 0/100 Ta=100℃ 1000hrs 0/100 Load 10N (1kgf) 10±1sec Load 5N (0.5kgf) 0°~90°~0° bend 2 times No noticeable damage No noticeable damage Ta=60℃, RH=90% 1000hrs 0/100 Ta=-40℃ 1000hrs 0/100 Ta=25℃, IF＝30mA 1000hrs 0/100 Ta=60℃, RH=90%, IF=30mA 500hrs 0/100 Ta=-30℃, IF＝20mA 1000hrs 0/100 -40℃~25℃~100℃~25℃ 30min,5min,30min,5min 25℃~65℃~-10℃ 90%RH 24hrs/1cycle 0/100 0/100 2) Criteria For Judging The Damage: Item Symbol Test Conditions Forward Voltage VF Reverse Current Luminous Intensity Criteria for Judgment Min Max IF＝20mA --- F.V.*)×1.1 IR VR=5V --- F.V.*)×2.0 IV IF＝20mA F.V.*)×0.7 --- *) F.V.: First Value. Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 6 OF 8 http://www.luckylight.cn Luckylight Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Forward Current & Forward Voltage Ta=25°C 80 60 40 20 450 500 550 600 Wavelength λp (nm) 650 Luminous Intensity & Ambient Temperature 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) 40 30 20 10 0 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage VF (V) 700 Ta=25℃ 1000 Forward Current Derating Curve f=1KHz Duty=1/10 100 10 1 0 10 1 2 3 10 10 10 Forward Current IF (mA) Radiation Diagram o Forward Current IF (mA) 4.0 Luminous Intensity & Forward Current Relative Luminous Intensity (%) 0 400 Ta=25°C 50 Forward Current IF (mA) 100 Relative Luminous Intensity (%) Relative Luminous Intensity (%) Spectrum Distribution 0 50 o 10 o 20 o 30 40 o 40 30 25 20 1.0 0.9 10 0 o 50 o 0.8 0 20 40 60 80 100 Ambient Temperature Ta (℃) 0.7 0.5 0.3 0.10 0.2 0.4 0.6 Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. 60 o 70 o 80o 90 Page: 7 OF 8 http://www.luckylight.cn Luckylight Please read the following notes before using the datasheets: 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 3. Soldering Condition 3.1 Pb-free solder temperature profile. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6. Caution in ESD Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded. Spec No.: A037 X440 Rev No.: V.2 Date: Sep/03/2009 Approved: JoJo Checked: Wu Drawn: Yao Lucky Light Electronics Co., Ltd. Page: 8 OF 8 http://www.luckylight.cn