E L E C T R O N I C MBR30U150CTH Power Schottky Rectifier - 30Amp 150Volt □ Features -Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 -High Junction Temperature Capability -Low forward voltage, high current capability -High surge capacity -Low power loss, high efficiency -ESD performance human body mode > 6 KV -Halogen-Free TO-220AB L B □ Application M C D -AC/DC Switching Adaptor and TFT-LCD Power Supply -SMPS K A E □ Absolute maximum ratings Symbol Ratings Unit Conditions IF(AV) 30 A Average Forward Current VRRM 150 V F O Repetitive Peak Reverse 350 A Peak Forward Surge Current VF(max) 0.63 V Forward Voltage Drop Tj -50 to +150 ºC Operating Temperature Tstg -50 to +150 ºC Storage Temperature H □ Electrical characteristics Maximum Instantaneous Forward Voltage Maximum Reverse Leakage Current Maximum Voltage Rate of Change Typical Thermal Resistance, Junction to Case Ratings Conditions IF = 15A 0.80V Tc = 25ºC 0.63V Tc = 125ºC 0.05mA Tc = 25ºC 10mA Tc = 125ºC dv/dt 10,000 V/μs Rated VR Rθ (j-c) 2.2 ºC/W Per diode VF IR Note: Pulse Test : 380μs pulse width, 2% duty cycle http:// www.sirectsemi.com H N A1 K A2 DIM Symbol J Voltage IFSM Parameters G I A B C D E F G H I J K L M N O DIMENSIONS INCHES MM MAX MIN MAX MIN .579 .606 14.70 15.40 .392 .411 9.95 10.45 .114 .126 2.90 3.20 .248 .272 6.30 6.90 .325 .350 8.25 8.90 .153 .173 3.90 4.40 .492 .551 12.50 14.00 .096 .108 2.45 2.75 .028 .039 0.70 1.00 .010 .022 0.25 0.55 .146 .157 3.70 4.00 .167 .187 4.25 4.75 .045 .057 1.15 1.45 .089 .114 2.25 2.90 .047 .055 1.20 1.40 NOTE May 2010 / Rev.6.5 1 MBR30U150CTH 100 1000 REVERSE CURRENT, IR(mA) TJ=175℃ TJ=125ºC TJ=25ºC 100 TJ=150℃ 1 TJ=125℃ 0.1 TJ=100℃ 0.01 TJ=75℃ TJ=50℃ 0.001 TJ=25℃ 0.0001 0 25 50 75 100 125 150 REVERSE VOLTAGE, VR(V) Figure 2. Typical Values Of Reverse Current Vs. Reverse Voltage (PerLeg) 1000 JUNCTION CAPACITANCE, CT(pF) 10 1 0 0.5 1 1.5 2 TJ=25℃ 100 10 2.5 0 30 FORWARD VOLTAGE DROP, VFM(V) 60 90 120 150 REVERSE VOLTAGE, VR(V) Figure 1. Max. Forward Voltage Drop Characteristics (PerLeg) Figure 3. Typical Junction Capacitance Vs. Reverse Voltage (PerLeg) 10 THERMAL IMPEDANCE ZthJC (C/W) INSTANTANEOUS FORWARD CURRENT, IF(A) TJ=75ºC 10 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 0.1 D = 0.08 PDM t1 t2 0.01 Notes: 1.Duty factor D = t1 / t2 2.Peak Tj = PDM x ZthJC + TC SINGLE PULSE (THERMAL RESISTANCE) 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, RECTANGULAR PULSE DURATION (SECONDS) Figure 4. Max. Thermal Impedance ZthJC Characteristics (PerLeg) http:// www.sirectsemi.com 2 MBR30U150CTH 16 D = 0.08 AVERAGE POWER LOSS, WATTS ALLOWABLE CASE TEMPERATURE, ℃ 180 DC 160 140 Square wave(D = 0.50) 80% Rated Vr applied 120 100 0 5 10 15 20 D = 0.17 D = 0.25 D = 0.33 12 RMS LIMIT D = 0.50 8 DC 4 0 25 0 AVERAGE FORWARD CURRENT, IF(AV) 5 10 15 20 25 AVERAGE FORWARD CURRENT, IF(AV) Figure 5. Max. Allowable Case Temperature Vs. Average Forward Current (PerLeg) Figure 6. Forward PowerLoss Characteristics (PerLeg) NON-REPETITIVE SURGE CURRENT, IFSM(A) 1000 AT ANY RATED LOAD CONDITION AND WITH RATED VRRM APPLIED FOLLOWING SURGE 100 10 100 1000 10000 SQUARE WAVE PULSE DURATION, TP(micro sec) Figure 7. Max. Non-Repetitive Surge Current (PerLeg) Sirectifier Global Corp., Delaware, U.S.A. U.S.A.: [email protected] France: [email protected] Taiwan: [email protected] Hong Kong: [email protected] China: [email protected] …Thailand: [email protected] Philippines: [email protected] Belize: [email protected] http:// www.sirectsemi.com 3