Luguang ERC38-04 High efficiency rectifier Datasheet

ERC38-04--ERC38-06
High Efficiency Rectifiers
VOLTAGE RANGE: 400 --- 600 V
CURRENT: 1.0 A
Features
DO - 41
Low cost
Diffused junction
Low leakage
Low forward voltage drop
High current capability
Easily cleaned with alcohol,Isopropanol
and similar solvents
The plastic material carries U/L recognition 94V-0
Mechanical Data
Case:JEDEC DO--41,molded plastic
Dimensions in millimeters
Polarity: Color band denotes cathode
Weight: 0.012 ounces,0.34 grams
Mounting position: Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%.
ERC38 - 04
ERC38 - 05
ERC38 - 06
UNITS
Maximum recurrent peak reverse voltage
VRRM
400
500
600
V
Maximum RMS voltage
VRMS
280
350
420
V
Maximum DC blocking voltage
VDC
400
500
600
V
Maximum average forw ard rectified current
@TA=75
9.5mm lead length,
IF(AV)
1.0
A
IFSM
40.0
A
VF
2.5
V
Peak forw ard surge current
8.3ms single half-sine-w ave
superimposed on rated load
@TJ =125
Maximum instantaneous forw ard voltage
@ 1.0A
Maximum reverse current
@TA=25
at rated DC blocking voltage @TA=100
5.0
IR
50
Maximum reverse recovery time
(Note1)
trr
Typical junction capacitance
(Note2)
CJ
Typical thermal resistance
(Note3)
RθJA
60
TJ
- 55 ----- + 150
TSTG
- 55 ----- + 150
Operating junction temperature range
Storage temperature range
20
ns
15
NOTE: 1. Measured with I F=0.5A, I R=1A, I rr=0.25A.
2. Measured at 1.0MH Z and applied rev erse v oltage of 4.0V DC.
3. Thermal resistance f rom junction to ambient.
http://www.luguang.cn
A
50.0
mail:[email protected]
pF
/W
ERC38-04--ERC38-06
High Efficiency Rectifiers
Ratings AND Charactieristic Curves
FIG.1--TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
50
N1.
trr
10
N1.
+0.5A
D.U.T.
(+)
PULSE
GENERATOR
(NOTE2)
(+)
25VDC
(approx)
(-)
OSCILLOSCOPE
(NOTE1)
1
NONINDUCTIVE
0
-0.25A
(-)
-1 .0 A
1cm
SET TIME BASE FOR 20/30 ns/cm
1.4
1.2
1
0.8
Single Phase
Half Wave 60Hz
Resisive or
Inductive Load
0.6
0.4
0.2
0
0
20
40
60
80
100
120 140 150
200
100
60
40
ERC38-04---ERC38-05
20
10
ERC38-06
4
TJ=25
2
1
0.1 0.2
TJ=125
8.3ms Single Half
Sine-Wave
30
AMPERES
25
20
15
10
5
0
1
2
4
8 10
20
1
2
4
10
20
40
100
40 60 80 100
NUMBER OF CYCLES AT 60 Hz
http://www.luguang.cn
FIG.5 -- TYPICAL FORWARD CHARACTERISTIC
10
1.0
AMPERES
40
35
0.4
REVERSE VOLTAGE,VOLTS
INSTANTANEOUS FORWARD CURRENT
AMBIENT TEMPERATURE.
FIG.4--PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT.
FIG.3--TYPICAL JUNCTION CAPACITANCE
Z
JUNCTION CAPACITANCE,pF
FIG.2 --FORWARD DERATING CURVE
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT.
NOTES:1.RISE TIME=7ns MAX.INPUT IMPEDANCE=1MΩ.22pF
2.RISE TIME=10ns MAX.SOURCE IMPEDANCE=50Ω.
TJ =25
Pulse Width=300 µS
0.1
0.01
0
0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6
4
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
mail:[email protected]
Similar pages