DIGITRON SEMICONDUCTORS MPU131-MPU133 PROGRAMMABLE UNIJUNCTION TRANSISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Value Unit PF 1/ӨJA 375 5.0 mW mW/°C DC forward anode current Derate above 25°C IT 200 2.67 mA mA/°C DC gate current IG ±20 mA Repetitive peak forward current 100µs pulse width, 1.0% duty cycle 20µs pulse width, 1.0% duty cycle ITRM 1.0 2.0 Amp Non-repetitive peak forward current 10µs pulse width ITSM Power dissipation Derate above 25°C Amp 5.0 Gate to cathode forward voltage VGKF 40 Volts Gate to cathode reverse voltage VGKR 5.0 Volts Gate to anode reverse voltage VGAR 40 Volts Anode to cathode voltage VAK ±40 Volts Operating junction temperature range Storage temperature range TJ -50 to 100 °C Tstg -65 to 150 °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Peak current (VS = 10Vdc, RG = 1.0MΩ) MPU131 MPU132 MPU133 MPU131 MPU132 MPU133 (VS = 10Vdc, RG = 10kΩ) Off set voltage (VS = 10Vdc, RG = 1.0MΩ) (VS = 10Vdc, RG = 10kΩ) Valley current (VS = 10Vdc, RG = 1.0MΩ) (VS = 10Vdc, RG = 10kΩ) MPU131 MPU132 MPU133 (all types) MPU131, MPU132 MPU133 MPU131 MPU132, MPU133 IP VT IV Gate to anode leakage current (VS = 40Vdc, TA = 25°C, cathode open) (VS = 40Vdc TA = 75°C, cathode open) IGAO Gate to cathode leakage current (VS = 40Vdc, anode to cathode shorted) IGKS Forward voltage (IF = 50mA peak) VF Peak output voltage (VB = 20Vdc, CC = 0.2µF) VO Pulse voltage rise time (VB = 20Vdc, CC = 0.2µF) tr 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 Min Typ Max - 1.25 0.19 0.08 4.0 1.20 0.70 2.0 0.30 0.15 5.0 2.0 1.0 0.2 0.2 0.2 0.2 0.70 0.50 0.40 0.35 1.6 0.6 0.6 0.6 70 50 18 18 270 270 50 25 - - 1.0 30 5.0 75 - 5.0 50 - 0.8 1.5 6.0 11 - - 40 80 [email protected] www.digitroncorp.com Rev. 20130115 Unit µA Volts µA nAdc nAdc Volts Volts ns DIGITRON SEMICONDUCTORS MPU131-MPU133 PROGRAMMABLE UNIJUNCTION TRANSISTORS MECHANICAL CHARACTERISTICS Case TO-92 Marking Body painted, alpha-numeric Pin out See below TO-92 Dim 144 Market Street Kenilworth NJ 07033 USA A B C D G H Inches Min Max 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 Millimeters Min Max 4.450 5.200 4.320 5.330 3.180 4.190 0.407 0.533 1.150 1.390 2.420 2.660 J 0.015 0.020 0.390 0.500 K L N P R V 0.500 0.250 0.080 0.115 0.135 0.105 0.100 - 12.700 6.350 2.040 2.930 3.430 2.660 2.540 - phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130115 DIGITRON SEMICONDUCTORS MPU131-MPU133 144 Market Street Kenilworth NJ 07033 USA PROGRAMMABLE UNIJUNCTION TRANSISTORS phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130115 DIGITRON SEMICONDUCTORS MPU131-MPU133 144 Market Street Kenilworth NJ 07033 USA PROGRAMMABLE UNIJUNCTION TRANSISTORS phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130115