Mimix CMM6001-SC 60 mhz - 3.0 ghz high dynamic range amplifier Datasheet

60 MHz - 3.0 GHz
High Dynamic Range Amplifier
CMM6001-SC
August 2006 - Rev 26-Aug-06
Features
Functional Block Diagram
60 MHz to 3.0 GHz Frequency Range
37 dBm Output IP3
2.5 dB Noise Figure
12.3 dB Gain
20.5 dBm P1dB
SOT-89 SMT Package, RoHS Compliant
Single Power Supply
+3V to +5V Voltage Rail
Ground
4
2
1
Description
The CMM6001-SC is a high dynamic range amplifier designed
for applications operating within the 60 MHz to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required. The amplifier has the
flexibility of being optimized for a number of wireless
applications. The combination of low NF and high IP3 at the
same bias point make it an ideal transmit or receive solution
when used in applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz;
MMDS (multichannel multipoint distribution systems)
operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN)
operating at 2.4 GHz.
The CMM6001-SC is packaged in a low-cost space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
3
Ground Output
Bias
Input
Applications
Wireless Local Loop Transmit and Receive
UNH Transmit and Receive
Dual Band 802.11 WLAN
WiMAX
Absolute Maximum Ratings
Supply Voltage
RF Input Power
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
+6.0 V
+10 dBm
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
65º C/W
Operation of this device above any of these parameters may cause damage.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Condition
F requency R ange
Gain
Externally matched
Input Return Loss
Externally matched
O utput I P3
N oi se F i gure
O utput P1dB
O perati ng C urrent R ange
S uppl y V ol tage
Min
0.06
10.5
+33
55
Typ
12.5
-10
+37
2. 8
20. 5
75
5. 0
Max
Units
3. 0
GHz
dB
dB
dB m
dB
dB m
mA
V
100
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
CMM6001-SC
August 2006 - Rev 26-Aug-06
Application Circuit
900
12.5
-18.0
-17
+37
20.5
2.7
1900
11.5
-11.5
-16
+37
19.5
2.8
S21
Units
2400
10.8
-10.0
-15
+37
19.5
2.9
MHz
dB
dB
dB
dBm
dBm
dB
10
-20
S22
-40
0.5
1.0
CMM6001-SC
SOT-89
T = 375 mil T = 100 mil
uuuu
C1
56 pF
S11
-10
-30
Notes:
1. Typical values reflect performance in recommended application circuit.
RF
IN
0
T = 70 mil
1.5
2.0
Frequency, GHz
C4
T = 485 mil 56 pF
2.5
3.0
RF
OUT
uuuu
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
Typical
Magnitude, dB
Parameter
S-Parameters vs Frequency
20
L1
10 nH
L2
12 nH
Vcc
5V
C2
56 pF
INPUT MATCHING NETWORK
Ref Designator
C1, C4
C2
Value
56 pF
0.1 F
L1
L2
10 nH
12 nH
Description
MCH185A560JK
VITR 0.1 F 25V CER
CAP 0603 X7R 10%
TOKO LL 1608-F10NJ
TOKO LL 1608-F12NK
Size
0603
0603
0603
0603
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
CMM6001-SC
August 2006 - Rev 26-Aug-06
Typical Scattering Parameters (Vd = +5V, Ids = 75 mA, T = 22°C, unmatched device in a 50 ohm system)
Frequency
(MHz)
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
S 11
S 21
S 12
(Mag)
(Ang)
(Mag)
(Ang)
(Mag)
0.313
0.307
0.305
0.304
0.305
0.307
0.310
0.313
0.316
0.318
0.322
0.324
0.327
0.329
0.332
0.335
0.337
0.339
0.340
0.341
0.342
0.343
0.343
0.344
0.344
0.344
0.344
0.344
-38.56
-43.12
-48.70
-54.84
-61.22
-67.68
-74.20
-80.57
-86.85
-93.11
-99.29
-105.40
-111.40
-117.40
-123.40
-129.20
-135.00
-140.80
-146.50
-152.30
-158.20
-164.10
-169.80
-175.80
178.20
172.20
166.10
160.00
4.435
4.382
4.344
4.309
4.270
4.234
4.197
4.158
4.122
4.085
4.043
4.004
3.960
3.919
3.879
3.838
3.799
3.760
3.720
3.679
3.639
3.600
3.561
3.524
3.486
3.448
3.410
3.373
159.70
155.90
151.60
147.20
142.70
138.20
133.60
129.00
124.40
119.90
115.30
110.70
106.20
101.70
97.22
92.77
88.32
83.87
79.47
75.03
70.64
66.25
61.89
57.51
53.16
48.81
44.46
40.13
0.118
0.118
0.118
0.117
0.117
0.117
0.116
0.116
0.115
0.115
0.114
0.114
0.113
0.112
0.112
0.111
0.110
0.109
0.109
0.108
0.107
0.106
0.105
0.105
0.104
0.103
0.102
0.101
S 22
(Ang)
-2.96
-7.56
-11.62
-15.23
-18.70
-22.02
-25.29
-28.50
-31.71
-34.88
-37.94
-40.98
-44.08
-47.07
-50.08
-53.15
-56.07
-59.11
-62.08
-65.06
-67.98
-71.02
-73.95
-76.90
-79.96
-82.91
-85.93
-88.99
(Mag)
(Ang)
0.090
0.078
0.072
0.070
0.070
0.071
0.073
0.076
0.078
0.082
0.086
0.090
0.094
0.097
0.101
0.104
0.108
0.111
0.114
0.118
0.121
0.124
0.127
0.130
0.133
0.135
0.137
0.139
-50.49
-44.05
-38.92
-35.16
-32.63
-31.18
-30.88
-31.21
-31.76
-32.50
-33.84
-35.26
-36.85
-38.64
-40.76
-42.85
-45.06
-47.37
-49.53
-51.72
-53.76
-55.82
-57.84
-59.75
-61.67
-63.35
-65.11
-66.85
S-Parameter Data Files are available online at www.mimixbroadband.com.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
CMM6001-SC
August 2006 - Rev 26-Aug-06
Physical Dimensions
4.50
[0.177]
1.55
[0.061]
0.71
[0.028]
1.73
[0.068]
0.38
[0.015]
1.70
[0.067]
4
1
0.46
[0.18]
3X
3.48
[0.137]
XXXXXXX
XXXXXX
ZYYWW
0.41
[0.016]
2
2.50
[0.096]
3
2.06
[0.081]
4.41
[0.163]
5.33
[0.210]
0.99
[0.039]
1.27
[0.050]
0.58
[0.023]
1.50
[0.059]
3.00
[0.118]
0.38
[0.015]
0.76
[0.030]
0.64
[0.025]
DIMENSIONS IN MILLIMETERS
[INCHES]
0.86
[0.034]
3.86
[0.152]
MARKINGS:
XXXXXXX = MIMIX MODEL NO.
XXXXXX = WAFER LOT NO.
ZYYWW = DATE CODE (YR/WEEK)
FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
60 MHz - 3.0 GHz
High Dynamic Range Amplifier
CMM6001-SC
August 2006 - Rev 26-Aug-06
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
CMM6001-SC-0G00
CMM6001-SC-0G0T
PB-CMM6001-SC-0000
Package
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface-mount power package in
tape and reel
Evaluation Board with SMA connectors for CMM6001-SC
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
Similar pages