Pericom NX7012D 2.5v/3.3v cmos xo Datasheet

Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm
NX701
2.5V/3.3V CMOS XO
7.0 x 5.0mm Ceramic SMD
Package: (Scale: none, Dimensions are in mm)
Product Features
• Very low phase jitter - < 1ps RMS max.
Recommended Land Pattern:
• Wide frequency range - 5 ~ 250MHz
• Thicker crystal for improved reliability
• Low supply current - 60mA max.
• Industrial Temperature Range
• Pb-free & RoHS compliant
• Fast lead time
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
*Note: pads 2 and 5 are
optional (shown as dotted lines).
XO's are designed to fit on industry
standard, 4 pad layouts.
Product Description
The NX701 XO series is a high performance
CMOS crystal oscillator family with very
low jitter performance. It supports various
options including wider frequency range,
2.5V/3.3V voltage, and various stabilities.
It is designed to meet the clock source
specifications for communication systems,
and other high performance equipment.
Pin Functions:
Pin
Function
1
OE Function
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Applications
• Networking systems
2
N/C
3
Ground
4
Output
5
N/C
6
V DD
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
• Servers and storage systems
• Profession video equipments
Part Ordering Information:
• Test and measurement
UX
NX70701 V
• FPGA/ASIC clock generation
A
Voltage:
1=+3.3V
2=+2.5V
SaRonix-eCera™ is a Pericom® Semiconductor company
•
I1 FFFF.FFFFFF
FFFF.FFFFFF
B
C
Stability and Temp Range:
Frequency:
Stability Temp Range
A = +/-20 ppm -20/+70°C
B = +/-25 ppm -20/+70°C
C = +/-50 ppm -20/+70°C
D = +/-25 ppm -40/+85°C
E = +/-50 ppm -40/+85°C
US: +1-408-232-9100 TW: +886-3-4518888
FFFF.FFFFFF
MHz, “4 digits/decimal/6 digits” format
•
www.pericom.com
14-0022
All specifications are subject to change without notice.
NX701
Rev B
08/13/14
1
NX701
2.5V/3.3V CMOS XO
Ultra Low Jitter PLL Crystal Oscillator 7.0 x 5.0mm
Electrical Performance
Parameter
Min.
Output Frequency
Typ.
Max.
Units
250
MHz
3.135
3.3
3.465
2.375
2.5
2.625
5
Supply Voltage
Supply Current, Output Enabled
Notes
V
60
See ordering options
mA
Supply Current, Output Disabled only
40
mA
Frequency Stability
±50
ppm
See ordering options
+85
°C
See ordering options
0.4
V
15
pF
55
%
Rise and Fall Time
3
ns
Measured 20/80% of waveform
Jitter, Accumulated, RMS (1-σ)
6
ps
20.000 adjacent periods
Operating Temperature Range
-40
Output Logic 0, VOL
Output Logic 1, VOH
V DD -0.4
V
Output Load
Duty Cycle
45
Measured 50% V DD
< 40MHz
0.4
1
ps
12kHz to 5 MHz frequency band
40 to 250MHz
0.4
1
ps
12kHz to 20 MHz frequency band
125MHz, 156.25MHz
0.4
0.6
ps
12kHz to 20 MHz frequency band
40
ps
100,000 random periods
Jitter, Phase, RMS
Jitter, pk-pk
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (1 year at 25°C average effective ambient temperature), shock and vibration.
2. Phase jitter typical value is depending on output frequencies.
3. For specifications other than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Min.
Input Voltage (pin 1), Output Enable
Typ.
Max.
Units
0.7 V DD
Input Voltage (pin 1), Output Disable (low power standby)
Notes
V
or open
Output is Hi-Z
0.3 V DD
V
Output Disable Delay
100
ns
Output Enable Delay
100
ns
Start up Time
10
ms
Absolute Maximum Ratings
Parameter
Storage Temperature
Min.
Typ.
-55
Max.
Units
+125
°C
Notes
For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/hiflex-xo/?part=NX701
For test circuit go to: http://www.pericom.com/pdf/sre/tc_6pcmos.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_7050_xo.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-232-9100 TW: +886-3-4518888
•
www.pericom.com
14-0022
All specifications are subject to change without notice.
NX701
Rev B
08/13/14
2
Similar pages