AZ760 20 AMP MINIATURE POWER RELAY FEATURES • • • • • • Low cost 20 Amp switching 60 Amp inrush current Quick connect terminals Flux tight construction UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 600 W or 4400 VA Max. switched current: 20 A Max. switched voltage: 150 VDC* or 400 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 20 A 230 VAC Res. Operate Time (typical) 15 ms at nominal coil voltage Release Time (typical) 10 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts 20 A at 220 VAC, 100k cycles 1.5 HP 250 VAC, 100k cycles Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Material Silver cadmium oxide Dropout Greater than 10% of nominal coil voltage Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz COIL Shock Power At Pickup Voltage (typical) 441 mW Max. Continuous Dissipation 3.0 W at 20°C (68°F) ambient Temperature Rise 35°C (63°F) at nominal coil voltage Temperature Operating 20 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Terminals Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring and do not subject the terminals to excessive force. Max. 130°C (266°F) NOTES Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 40 grams Packing unit in pcs 50 per plastic tray / 500 per carton box 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-11 AZ760 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 6 Must Operate VDC 4.2 ORDER NUMBER Max. Continuous VDC 11.0 Coil Resistance Ohm ± 10% 40 Form A (SPST) AZ760–1A–6D 12 8.4 22.0 160 AZ760–1A–12D 24 16.8 43.8 640 AZ760–1A–24D 48 33.6 87.6 2,560 AZ760–1A–48D MECHANICAL DATA WIRING DIAGRAM 0.250 (6.4) 2 pl 0.092 (2.3) 0.032 (0.8) 2 pl 0.225 (5.7) 0.420 (10.7 ) 0.452 (11.5) Viewed toward terminals 0.032 (0.8) 0.054 (1.4) 0.060 (1.5) 0.016 (0.4) 0.728 max. (18.5 max.) 0.052 (1.3) 0.142 (3.6) 1.068 (27.1) 0.465 (11.8) 0.180 (4.6) 1.20 max. (30.5 max.) PC BOARD LAYOUT .130 (3.3) 4 x ø .070 (1.8) 1.22 max. (31 max.) 0.855 (21.7) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2004-08-11