Kingbright AM2520QBC-D09 Subminiature solid state lamp Datasheet

SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520QBC/D09
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Description
Features
z SUBMINIA TURE PACKAGE.
z WIDE VIEWING ANGLE.
z Z-BEND LEAD.
z LONG LIFE - SOLID STATE RELIABILITY.
z LOW PACKAGE PROFILE.
The Blue source color devices are made with AlInGaN on
Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z PACKAGE : 1000PCS / REEL.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD9939
REV NO: V.2
DATE: APR/26/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1202000592
Selection Guide
Part No.
Dice
AM2520QBC/D09
Iv (mcd) [2]
@ 20mA
Lens Type
Blue (AlInGaN)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
180
500
20°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
468
nm
IF=20mA
Blue
470
nm
IF=20mA
Spectral Line Half-width
Blue
25
nm
IF=20mA
C
Capacitance
Blue
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
3.3
4
V
IF=20mA
IR
Reverse Current
Blue
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD9939
REV NO: V.2
DATE: APR/26/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1202000592
Blue
AM2520QBC/D09
SPEC NO: DSAD9939
REV NO: V.2
DATE: APR/26/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1202000592
AM2520QBC/D09
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD9939
REV NO: V.2
DATE: APR/26/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1202000592
PACKING & LABEL SPECIFICATIONS
AM2520QBC/D09
SPEC NO: DSAD9939
REV NO: V.2
DATE: APR/26/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1202000592
Similar pages